Abstract:The classical models used for describing the behavior of woven fabrics do not fully account for the whole set of phenomena that occur during the testing of such materials. This lack of precision is mainly due to the absence of energy terms related to the microstructural properties of the fabric and, in particular, to the bending stiffness of the yarns. In this paper it is shown that in the unbalanced fabrics the different bending stiffnesses of the warp and weft yarns produce macroscopic effects that are extremely visible as, for example, the asymmetric S-shape during a Bias Extension Test (BET). We propose to introduce a constrained micromorphic model and a discrete model that are able to account for i) the angle variation between warp and weft tows, ii) the unbalance in the bending stiffness of the yarns and iii) the relative slipping of the tows. The constrained micromorphic model is framed in the spirit of the Principle of Virtual Powers for the equilibrium of continuum bodies. A suitable constraint is introduced by means of Lagrange multipliers in the strain energydens ity and the resulting constrained model tends a particular second gradientone. The main advantage of using such constrained micromorphic model is that the kinematical and traction boundary conditions that can be imposed on the boundary of the considered body take a natural and unique meaning. The discrete model is set up by opportunely interconnecting Euler-Bernoulli beams with different bending stiffnesses in the two directions by means of rotational and translational elastic springs. The main advantage of such discrete model is that the slipping of the tows is described in a rather realistic way. Suitable numerical simulations are presented for both the continuum and the discrete models and a comparison between the simulations and the experimental results is made showing a definitely good agreement.

Effect of Tackification on In-Plane Shear Behaviours of Biaxial Woven Fabrics in Bias Extension Test: Experiments and Finite Element Modeling

Analysis and Characterization of Interlaminar Tack for Different Prepreg Materials During Automated Fiber Placement

Influences of Wrinkles Induced by Tows’ Offset in Automated Fiber Placement on the Bending Properties of Composites

Bias extension test on an unbalanced woven composite reinforcement: Experiments and modeling via a second-gradient continuum approach

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

On effect of shear-tension coupling in forming simulation of woven fabric reinforcements

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Experimental and numerical study of specific bending behavior of tufted multilayered reinforcements and effects of tufting density

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Response surface analysis of biaxial mechanical properties and elastic parameters for woven fabric composites

Shear deformation characteristics under tensile stress during forming of tubular braided fabrics

Finite Element Modelling for Tensile Behaviour of Thermally Bonded Nonwoven Fabric

A simplified constitutive and finite element model of plain weave fabric reinforcements for the biaxial loading

Improved hyperelastic model for simulating the forming of biaxial braided fabrics

Experimental investigation on the fatigue life and damage mechanism of plain weave composites under biaxial tension–torsion combined fatigue loading

A Computationally Efficient Model to Predict the Uniaxial Tensile Loading Response for Dry Woven Fabrics

Measurement of meso-scale shear deformations for modelling textile composites

Exploring in-plane shear characteristics of multilayer biaxial weft knitted fabrics through a micro-scale virtual fiber modeling

Continuum and discrete models for unbalanced woven fabrics

Influence of in-plane bending behaviour on textile composite reinforcement forming

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion