Abstract:Various defects with dispersive feature sizes can be accumulated inevitably in fiber-reinforced resin composites during their manufacturing and service processes, which are also difficult to be detected. The final objective of defects testing is to obtain the accuracy assessment of performance of defective structures. A micro-stress non-destructive defect detection and evaluation method is proposed for fiber-reinforced resin composites, which is especially suitable for composites measurement. Combing with the optical measurement technology for full-field displacement, the abnormal responses which caused by the defects of the structure under low stress level is able to be captured. The wrinkle defect detection is taken as an example to show the measurement processes. First, a specific detection scheme is designed based on the theoretical prediction of characteristic responses of wrinkles. Then, a new method of full-field displacement measurement is innovatively proposed based on the grating projection technology. Results show that under the axial tensile loading, the distorted out-of-plane displacements caused by wrinkles can be detected by the improved grating projection technology. The distorted displacements revealed the spatial distribution and severity of defects, and the influence on structural performance degradation can be evaluated based on the degree of displacement distortion. Further, by applying the optical-mechanical detection method, the mechanical responses of the defective component under a given working condition can be obtained directly, which can provide a reference for the adaptability evaluation of the component.

Influences of Wrinkles Induced by Tows’ Offset in Automated Fiber Placement on the Bending Properties of Composites

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

Process-dependent Wrinkle Formation for Steered Tow During Automated Fiber Placement: Modeling and Experimental Verification

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Damage and Failure Mechanisms of CFRP Due to Manufacturing Induced Wrinkling Defects

Characterization of wrinkle morphologies by surface waviness evaluation method during deep forming of multilayer composite preforms

An experimental and computational investigation of embedded wrinkle's impacts on the compressive responses of thick unidirectional glass fiber-reinforced composites

Experimental investigation of trans-scale displacement responses of wrinkle defects in fiber reinforced composite laminates

Automated Fiber Placement Path Planning and Analysis of Pressure Vessels

A novel assessment method for wrinkle defects in composites

The effects of wrinkle distributions on the mechanical characteristics of unidirectional glass fiber-reinforced composites

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

Effect of Eccentric Tension on the Response of Wrinkle Defects in Carbon Fiber-Reinforced Composite Laminates

Formation Mechanism and Modeling Method of Wrinkling Defects in Variable Angle Tow Steering Fiber Placement

Experimental investigation of trans-scale displacement responses of wrinkle defects in fiber-reinforced composite laminates

Wrinkles in Fiber-Reinforced Resin Composites: Micro-stress Non-Destructive Testing

Exploring deformability in 3D tufted composite reinforcements: Understanding bending behaviors in forming applications

Wrinkles in Fiber-Reinforced Resin Composites: Heterogeneity and Virtual Test

Experimental study on the mechanical behavior of laminates made by fiber steering: Influence of fiber angle and tow width

Wrinkle defects investigation on displacement response in fiber-reinforced composites using grating projection measurement