Abstract:In this study, both the digital image correlation (DIC) and depth-sensing indentation (DSI) measurements were performed to investigate the non-uniform local mechanical behaviors of HR3C/T92 dissimilar welded joint during plastic deformation. The macro-scale DIC experiments showed the uneven distribution and transfer phenomena of the plastic deformation in the welded samples. The grain-scale DIC measurements further revealed that the strain localization was closely related to the local microstructures. To understand the correlation of the non-uniform deformation behavior with the local microstructure in the welded samples, the electron backscatter diffraction (EBSD) tests in the as-received state and ex-situ optical microscope (OM) observations during the tensile deformation process were conducted. The slip morphologies were found to be different across the welded joint, and the grain-scale strain localizations were proved to be closely related with the behaviors of the slip bands. Moreover, ex-situ DSI tests were also carried out to determine the local mechanical properties of the HR3C/T92 dissimilar welded joint during the tensile deformation process. The basic elasto-plastic properties (elastic modulus, yield strength, and hardening parameters) in particular zones of the welded joint were estimated by using the multi-fidelity deep neural network method combined with indentation characteristic parameters. The non-uniform deformation behavior of the HR3C/T92 welded joint during tensile loading was further simulated by using the finite element method based on the estimated elasto-plastic properties of the welded joint, and a general agreement between the simulated result and experimental tensile curve has been obtained.

Full-field Analysis of Shear Test on 3D Orthogonal Woven C/C Composites

DIC/DSI Based Studies on the Local Mechanical Behaviors of HR3C/T92 Dissimilar Welded Joint During Plastic Deformation

Identification of Shear Properties for Woven Fiber Reinforced Polymer Simulation

Finite Element Modeling of 3D Orthogonal Woven C/C Composite Based on Micro-Computed Tomography Experiment

In situ characterization of the flexural behavior and failure mechanism of 2D needle-punched carbon/carbon composites by digital image correlation

Digital Image Correlation Analysis of Strain Fields in Fibre-Reinforced Polymer–Matrix Composite under ±45° Off-Axis Tensile Testing

A 2D mark shearing technique for characterizing the mechanical properties of material

A novel method for the characterization of through-thickness shear constitutive behavior of composites

Effect of off-axis angle on mesoscale deformation and failure behavior of plain-woven C/SiC composites with digital image correlation

Characterization of Shear Behavior in Stainless Steel Wire Mesh Using Bias-Extension and Picture Frame Tests

Multiscale Numerical Scheme on Shear Failure Feature of 3dowc/cs Bar Incorporating Microlevel Uncertainties and Coupled Constitutive Behavior

Quantitative Evaluation of the Severity of Wrinkles in Carbon Fiber Composites

Quasi-static mechanical behavior of 2.5D woven variable thickness composites

An Extended Full Field Self-Consistent Cluster Analysis Framework for Woven Composite

Morphology characterization and in-situ three-dimensional strain field monitor of short carbon fiber-reinforced polymer composites under tension

Full-Field Measurement at the Weave Scale in Hemp/Epoxy Composite Using Digital Image Correlation

Multiscale nonlinear analysis of 3D orthogonal woven C/SiC composites based on the CT reconstruction

Full-field analysis of notch effects of 3D carbon/carbon composites

Measurement of meso-scale shear deformations for modelling textile composites

Measuring Mechanical Properties of the 3D Carbon/Carbon Composite Using Automated Grid Method

Digital Image Correlation-Based Investigation of the Shear Performance of Connection Systems of Assembled Bamboo Scrimber-Lightweight Concrete Composite Beams