Abstract:The conventional method (CM) for shear lag analysis of thin-walled box girders supposes that the neutral axis coincides with the centroidal axis of the whole cross section, and thus neglects the axial equilibrium condition. An analytical method considering axial equilibrium and shear deformation, which is referred to as PM, is proposed for overcoming the defect of the conventional method. The longitudinal displacement of the web is introduced to satisfy the axial equilibrium condition and locate the neutral axis automatically. The shear deformation is considered according to the Timoshenko beam theory. Three independent shear lag functions are adopted for describing different shear lag intensities of the top, bottom and cantilever slabs. The governing differential equations for the displacement variables are deduced by means of the virtual work theorem and solved with the relevant boundary conditions. The analytical solution is then derived for the distance from the neutral axis to the top fiber of the cross section. The accuracy of the proposed method is validated by comparisons with the available experimental data as well as the finite element analysis results. Moreover, the distances from the neutral axis to the top fiber, axial forces, and stress difference ratios are analyzed for typical thin-walled box girders to quantify the influence of the axial equilibrium condition. Finally, an extensive parametric study is conducted to examine the effects of various geometric parameters on the stress difference ratio under different load types. The results show that the proposed method can provide good predictions for both deflections and axial stresses, and neglecting axial equilibrium leads to considerable underestimations of axial stresses especially at the top flange-web junctions over the interior support of the continuous box girder.

Shear resistance of slender webs in I-girders

ELASTIC SHEAR BUCKLING OF WEB PLATES IN TAPERED I-GIRDERS

Finite element analysis on shear capacity of the corrugated web H-shaped steel beam

Elastic Buckling of Web Plates in I-girders under Patch and Wheel Loading

Elastic Buckling of Web Restrained by Flanges in I-section Members

Shear Response of Prestressed Thin-Webbed Continuous Girders

Revisiting the Bearing Stresses in Webs of Crane Runway Girders under Wheel Loads

AN INSIGHT INTO FORMULAS FOR PREDICTING THE LOCAL BEARING STRESS IN WEBS OF CRANE RUNWAY BEAMS

STIFFENER STIFFNESS AND ELASTIC BUCKLING STRESS OF STEEL PLATE SHEAR WALL

OUT-OF-PLANE STABILITY OF MONOSYMMETRIC WEB-TAPERED I-BEAMS

Lateral Buckling of Web-Tapered I-beams: A New Theory

Critical Load for Shear-Induced Lateral-Distortional Buckling in I-section Steel Beams Considering Flexural Stiffness Ratio

ANALYSIS OF SHEAR STRENGTH OF THIN PLATE ALUMINUM GIRDERS

Effect of variable-thickness webs on shear buckling performance of welded steel plate girders: Numerical analysis and proposed design rules

Shear behaviour and design of bolted steel girders with trapezoidal corrugated webs

Investigation of the shear resistances of steel-concrete-steel composite structures with bidirectional webs

Improved method for shear lag analysis of thin-walled box girders considering axial equilibrium and shear deformation

Numerical and theoretical analysis of normal stress distribution in flanges of I-girders with trapezoidal corrugated webs under uniform bending

Analysis of Influential Factors on Additional Shear Force Induced by Shear Deformation in Girder Bridges with Corrugated Steel Webs

Shear Resistance of Stiffened Steel Corrugated Shear Walls

Study on the natural frequency of box girders with corrugated steel webs