Abstract:This work develop a durable polymer solid‐state electrolyte by utilizing a nanofiber WPI framework. Attribute to the formation of hydrogen bonds, WPI membrane achieves tensile strength of 12.2 MPa. When integrated with a polyethylene oxide (PEO)–succinonitrile (SN)–lithium bis(trifluoromethane)sulfonimide (LiTFSI) electrolyte, the PEO/SN/LiTFSI‐WPI cell exhibits a capacity retention ratio of 94.6% after 100 cycles at 0.3 C and 30 °C. Incorporating a water‐immersed polyimide membrane (WPI) as a framework into a polymer electrolyte PEO/SN/LiTFSI (PSL) can address the challenges faced by solid‐state polymer electrolytes in practical applications for all‐solid‐state lithium‐ion batteries (ASSLIBs) used in flexible and wearable electronics. The inferior mechanical performance and inadequate ionic conductivity of polymer electrolytes have hampered their widespread use. By utilizing a matrix of polyethylene oxide (PEO) along with succinonitrile (SN) and lithium bis(trifluoromethane)sulfonimide (LiTFSI) as additives, the WPI enhances the stability of the PSL electrolyte structure through reinforced internal hydrogen bonds of poly(amic acid), its precursor, post‐thermal imidization in the presence of deionized water. This structural enhancement leads to improved mechanical properties, evidenced by a tensile strength of 12.2 MPa at a high porosity of 85.6%. The WPI‐PSL electrolyte exhibits favorable ionic conductivity, thermal stability, and electrochemical compatibility with lithium metal. As a result, the WPI‐PSL configuration demonstrates exceptional performance in a LiFePO4/Li ASSLIBs system, showcasing outstanding cycling performance at both 30 and 60 °C, with capacity retention ratios reaching 94.6% and 96% after 100 cycles at 0.3 C, respectively. This research significantly advances the development of polymer solid‐state electrolytes, propelling their use in flexible power sources for ASSLIBs.

Electrospun PEO nanofibrous membrane enable by LiCl, LiClO4, and LiTFSI salts: a versatile solvent-free electrolyte for lithium-ion battery application

Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al 2 O 3

Effect of titanium dioxide and zinc oxide fillers on morphology, electrochemical and mechanical properties of the PEO-based nanofibers, applicable as an electrolyte for lithium-ion batteries

Electrospun Polyethylene Oxide (PEO)-Based Composite polymeric nanofiber electrolyte for Li-Metal Battery

Enhanced electrical properties of spun blend polymer composite electrolyte PMMA – PVdF-co-HFP – PEO/ LiBF4 containing nano SiO2 for lithium-ion batteries application

Electrospun Poly(ethylene Oxide) Nanofibrous Composites with Enhanced Ionic Conductivity As Flexible Solid Polymer Electrolytes

Engineering Ion Conduction Nanodomain Spacing and Interface Environment for Ultrastable All‐Solid‐State Lithium Metal Batteries

Silica-assisted cross-linked polymer electrolyte membrane with high electrochemical stability for lithium-ion batteries

The Effects of Electrospinning Structure on the Ion Conductivity of PEO-Based Polymer Solid-State Electrolytes

Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries

A new strategy of PVDF based Li-salt polymer electrolyte through electrospinning for lithium battery application

Deionized Water Pretreated Polyimide Nanofiber Membranes as Framework for Polymer Electrolytes Applied to Solid‐State Lithium Metal Batteries

Completely Amorphous Poly(ethylene oxide)-Based Electrolyte Enables High Ionic Conductivity for Room-Temperature All-Solid-State Lithium Metal Batteries

A Fibrotic Poly (ethylene Oxide) Polymer Electrolyte with High Ionic Conductivity for Stable Lithium Metal Batteries

Cyclopropenium Cationic-Based Covalent Organic Polymer-Enhanced Poly(ethylene oxide) Composite Polymer Electrolyte for All-Solid-State Li-S Battery.

LiTFSI salt concentration effect for well‐balanced ion transport and physical properties in nanocellulose‐reinforced PEO#600 solid electrolytes

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

Stable Polymer Electrolytes Based on Polyether-Grafted Zno Nanoparticles for All-Solid-State Lithium Batteries

Novel PEO-based composite electrolyte for low-temperature all-solid-state lithium metal batteries enabled by interfacial cation-assistance

Ether Modified Poly(ether Ether Ketone) Nonwoven Membrane with Excellent Wettability and Stability As a Lithium Ion Battery Separator

3D porous PTFE membrane filled with PEO-based electrolyte for all solid-state lithium–sulfur batteries