Abstract:Due to the lack of a generally accepted methodology for calculating the starting processes of automotive diesel engines, today it is not possible to calculate their temperature parameters with a sufficient degree of accuracy during start-up, which determine the condition of a guaranteed start-up process. The main problem in applying theoretical calculations is that they take into account the compression ratio of the engine. But the compression ratio and the value of the actual pressure in the engine cylinders during the start-up are completely different indicators. The purpose of this work is to correct the generally accepted dependencies for determining the temperature parameters of a diesel engine by introducing a correction factor that takes into account the reduced pressure in the engine cylinders during start-up, as well as calculating the temperature parameters during start-up according to the proposed calculation method. The correction factor is determined experimentally and depends on the engine temperature. When applying the correction factor, it becomes possible to accurately calculate the temperature of the fuel-air mixture, which determines the possibility of a guaranteed start-up process and at the same time allows you to set the minimum necessary requirements for the means of thermal pre-start preparation. A group of graduate students and teachers (Izhevsk State Agricultural Academy and Kazan Agrarian University) conducted a number of practical studies on the basis of one of the leading agricultural enterprises of the Udmurt Republic JSC "Ilyich's Way". The MTZ-82 tractor was taken as the object of the study. The subject of the study was the launch of its D-243 engine at low temperatures in real operating conditions. The choice of this model of diesel engine is due to its wide application on tractors. The studies were carried out according to the approved test program, which consists in starting the D-243 engine of the MTZ-82 tractor at temperatures from - 30 ° C with an interval of 5 ° C to +5 ° C (engine temperature is equal to ambient temperature), as well as from +5 ° C to +90 ° C with an interval of 20 ° C (ambient temperature +20 ° C). Measurements were carried out to determine the amount of compression in the engine cylinders and the speed of rotation of the crankshaft at certain temperatures. The experiments were carried out using a starter charger that provides the full electric power of the diesel starter. As a result of the experimental work carried out, a change in the value of the correction coefficient from the engine temperature was established, and in accordance with the modified methodology of theoretical calculations, the values of the temperature of the fuel-air mixture at the end of the compression stroke of the diesel engine at start-up are given. It is established that the minimum required pre-start temperature of the diesel engine should be at least +5 ° C. Based on the results of the analysis of calculations, the directions of ensuring a guaranteed start of the diesel engine by simultaneously heating the coolant and engine oil are proposed. These requirements can be provided by a thermal storage system that does not require additional energy sources for its operation

Thermal Regime of Automobile Exhaust System at Low Temperature

Experimental Study on an Absorption Refrigeration System at Low Temperatures

Problems of the starting and operating of hydraulic components and systems in low ambient temperature

Development of the design of an internal combustion engine cooling system with a pre-starting heating function

A novel design of heating system using phase change material for passenger car cabin in cold starting conditions

Improving Cold Start and Transient Performance of Automotive Diesel Engine at Low Ambient Temperatures

High-pressure exhaust gas recirculation line condensation model of an internal combustion diesel engine operating at cold conditions

Reducing Cold Start Emissions from Automotive Diesel Engine at Cold Ambient Temperatures

Quantitative study of vehicle CO2 emission at various temperatures and road loads

An Experimental Study on the Measures for Improving Cold Start/Warm-up Process of Engine

OPTIMIZATION OF METHODS AND PARAMETERS OF PRE-START THERMAL PREPARATION OF THE ENGINE FOR STARTING DEPENDING ON THE AMBIENT TEMPERATURE

Environmental control and test dynamic control of the engine output parameters

Contamination of engine oils during winter vehicle operation

Experimental Research on Low Temperature Combustion under Coupled Effect of EGR Rate and Intake Temperature

Particulate matter emissions from light-duty gasoline vehicles under different ambient temperatures: Physical properties and chemical compositions

Development and Performance Evaluation of CO2 Automotive Heat Pump System Applied to-20 ℃ Environment

Impacts of different ambient temperatures on cold-start characteristics of speed-up duration of an ISAD hybrid diesel engine in plateau

Low-Condensation Diesel Use Contributes to Winter Haze in Cold Regions of China

Exhaust Emission and Thermal Efficiency of Vehicle Heavy Duty Diesel Engine at Low Load

Experimental investigation of atomization characteristics at low temperature environments during diesel engine cold start

Environmental aspects in operation of a gasoline car with antitoxic system