Abstract:Due to the lack of a generally accepted methodology for calculating the starting processes of automotive diesel engines, today it is not possible to calculate their temperature parameters with a sufficient degree of accuracy during start-up, which determine the condition of a guaranteed start-up process. The main problem in applying theoretical calculations is that they take into account the compression ratio of the engine. But the compression ratio and the value of the actual pressure in the engine cylinders during the start-up are completely different indicators. The purpose of this work is to correct the generally accepted dependencies for determining the temperature parameters of a diesel engine by introducing a correction factor that takes into account the reduced pressure in the engine cylinders during start-up, as well as calculating the temperature parameters during start-up according to the proposed calculation method. The correction factor is determined experimentally and depends on the engine temperature. When applying the correction factor, it becomes possible to accurately calculate the temperature of the fuel-air mixture, which determines the possibility of a guaranteed start-up process and at the same time allows you to set the minimum necessary requirements for the means of thermal pre-start preparation. A group of graduate students and teachers (Izhevsk State Agricultural Academy and Kazan Agrarian University) conducted a number of practical studies on the basis of one of the leading agricultural enterprises of the Udmurt Republic JSC "Ilyich's Way". The MTZ-82 tractor was taken as the object of the study. The subject of the study was the launch of its D-243 engine at low temperatures in real operating conditions. The choice of this model of diesel engine is due to its wide application on tractors. The studies were carried out according to the approved test program, which consists in starting the D-243 engine of the MTZ-82 tractor at temperatures from - 30 ° C with an interval of 5 ° C to +5 ° C (engine temperature is equal to ambient temperature), as well as from +5 ° C to +90 ° C with an interval of 20 ° C (ambient temperature +20 ° C). Measurements were carried out to determine the amount of compression in the engine cylinders and the speed of rotation of the crankshaft at certain temperatures. The experiments were carried out using a starter charger that provides the full electric power of the diesel starter. As a result of the experimental work carried out, a change in the value of the correction coefficient from the engine temperature was established, and in accordance with the modified methodology of theoretical calculations, the values of the temperature of the fuel-air mixture at the end of the compression stroke of the diesel engine at start-up are given. It is established that the minimum required pre-start temperature of the diesel engine should be at least +5 ° C. Based on the results of the analysis of calculations, the directions of ensuring a guaranteed start of the diesel engine by simultaneously heating the coolant and engine oil are proposed. These requirements can be provided by a thermal storage system that does not require additional energy sources for its operation

OPTIMIZATION OF METHODS AND PARAMETERS OF PRE-START THERMAL PREPARATION OF THE ENGINE FOR STARTING DEPENDING ON THE AMBIENT TEMPERATURE

Numerical simulation of the diesel engine starting considering air pre-heating in the intake system

Development of the design of an internal combustion engine cooling system with a pre-starting heating function

Optimization of Start-up Process in Combined Cycle Steam Turbine of a Power Plant

An Experimental Study on the Measures for Improving Cold Start/Warm-up Process of Engine

An Assessment of the Application of Catalyst Preheating Prior to Engine Cold Start to Improve the Filtration Performance of CDPF on Particulate Emissions

Thermal Management Opportunity on Lubricant Oil to Reduce Fuel Consumption and Emissions of a Light-Duty Diesel Engine

Laboratory Tests of Electrical Parameters of the Start-Up Process of Single-Cylinder Diesel Engines

Reducing Cold Start Emissions from Automotive Diesel Engine at Cold Ambient Temperatures

STUDY OF THE OUTPUT CHARACTERISTICS OF TURBOCOMPRESSORS OF MODERN AGRICULTURAL MACHINERY

IMPROVEMENT OF DIAGNOSTICS METHODOLOGY OF DIESEL ENGINE WITH COMMON RAIL FUEL SYSTEM IN FREE ACCELERATION MODE

Modeling Heavy-Duty Engine Thermal Management Technologies to Meet Future Cold Start Requirements

Improving Cold Start and Transient Performance of Automotive Diesel Engine at Low Ambient Temperatures

Estimation of the efficiency of the thermal cycle of a piston internal combustion engine

Evaluation of thermal management technologies for fuel efficient cold-start emissions reduction in diesel engines

New method of assessment of technical condition of vehicle internal combustion engines in the course of their long-term operationх длительной эксплуатации

THE CONCEPT OF COMBUSTION PROCESS ORGANISATION IN A BOXER TWO-STROKE DIESEL ENGINE AT A HIGH LEVEL OF BOOSTING

Experimental investigation of atomization characteristics at low temperature environments during diesel engine cold start

Improving Vehicle Warm-Up Performance Using Phase-Change Materials and Thermal Storage Methods

Cold and Warm Start Characteristics using HVO and RME Blends in a V6 Diesel Engine

Impacts of different ambient temperatures on cold-start characteristics of speed-up duration of an ISAD hybrid diesel engine in plateau