Abstract:Due to the lack of a generally accepted methodology for calculating the starting processes of automotive diesel engines, today it is not possible to calculate their temperature parameters with a sufficient degree of accuracy during start-up, which determine the condition of a guaranteed start-up process. The main problem in applying theoretical calculations is that they take into account the compression ratio of the engine. But the compression ratio and the value of the actual pressure in the engine cylinders during the start-up are completely different indicators. The purpose of this work is to correct the generally accepted dependencies for determining the temperature parameters of a diesel engine by introducing a correction factor that takes into account the reduced pressure in the engine cylinders during start-up, as well as calculating the temperature parameters during start-up according to the proposed calculation method. The correction factor is determined experimentally and depends on the engine temperature. When applying the correction factor, it becomes possible to accurately calculate the temperature of the fuel-air mixture, which determines the possibility of a guaranteed start-up process and at the same time allows you to set the minimum necessary requirements for the means of thermal pre-start preparation. A group of graduate students and teachers (Izhevsk State Agricultural Academy and Kazan Agrarian University) conducted a number of practical studies on the basis of one of the leading agricultural enterprises of the Udmurt Republic JSC "Ilyich's Way". The MTZ-82 tractor was taken as the object of the study. The subject of the study was the launch of its D-243 engine at low temperatures in real operating conditions. The choice of this model of diesel engine is due to its wide application on tractors. The studies were carried out according to the approved test program, which consists in starting the D-243 engine of the MTZ-82 tractor at temperatures from - 30 ° C with an interval of 5 ° C to +5 ° C (engine temperature is equal to ambient temperature), as well as from +5 ° C to +90 ° C with an interval of 20 ° C (ambient temperature +20 ° C). Measurements were carried out to determine the amount of compression in the engine cylinders and the speed of rotation of the crankshaft at certain temperatures. The experiments were carried out using a starter charger that provides the full electric power of the diesel starter. As a result of the experimental work carried out, a change in the value of the correction coefficient from the engine temperature was established, and in accordance with the modified methodology of theoretical calculations, the values of the temperature of the fuel-air mixture at the end of the compression stroke of the diesel engine at start-up are given. It is established that the minimum required pre-start temperature of the diesel engine should be at least +5 ° C. Based on the results of the analysis of calculations, the directions of ensuring a guaranteed start of the diesel engine by simultaneously heating the coolant and engine oil are proposed. These requirements can be provided by a thermal storage system that does not require additional energy sources for its operation

IMPROVEMENT OF DIAGNOSTICS METHODOLOGY OF DIESEL ENGINE WITH COMMON RAIL FUEL SYSTEM IN FREE ACCELERATION MODE

Methodology to Determine the Fast Burn Period Inside a Heavy-Duty Diesel Engine Converted to Natural Gas Lean-Burn Spark Ignition Operation

Investigation of an efficient model-based fuel economy optimization methodology for diesel engines focusing on real world driving emission cycles

Study of a Hybrid Pneumatic-Combustion Engine under Steady-State and Transient Conditions for Transport Application

THE CONTACTLESS DIAGNOSTICS TO DETERMINE THE TECHNICAL CONDITION OF INTERNAL COMBUSTION ENGINES OF HIGH-ENERGY AGRICULTURAL MACHINERY

STUDY OF THE OUTPUT CHARACTERISTICS OF TURBOCOMPRESSORS OF MODERN AGRICULTURAL MACHINERY

Investigation of the optimal timing and amount of fuel injection on the efficiency and emissions of a diesel engine through experimentation and numerical analysis

Use of digital technologies in diagnosing engines of energy-saturated agricultural machinery

IMPROVING TECHNIQUE FOR EFFICIENCY CONTROL OF AIRCRAFT ENGINE IGNITION SYSTEMS

Prospects for the diesel fuel equipment development in the near future

Numerical Investigation of the Fuel/Air Ratio Sensor Sensitivity in a Port-Fuel-Injected Spark-Ignition Engine Equipped with Three-Way Catalysts

Laboratory Tests of Electrical Parameters of the Start-Up Process of Single-Cylinder Diesel Engines

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

Operational efficiency improvement of turbocharged diesel engines

OPTIMIZATION OF METHODS AND PARAMETERS OF PRE-START THERMAL PREPARATION OF THE ENGINE FOR STARTING DEPENDING ON THE AMBIENT TEMPERATURE

DIAGNOSING THE TECHNICAL CONDITION OF MOBILE POWER EQUIPMENT USING DIGITAL TECHNOLOGIES

Estimation of the efficiency of the thermal cycle of a piston internal combustion engine

Simulation of the Effect of Fuel Injection Rate that Matches Fuel Injection Advanced Angle on the Performance of Ultra High Pressure Common Rail Diesel Engine

Improving the Efficiency of Spark-Ignition Internal Combustion Engine Using a Novel Electromagnetic Actuator and Adapting Increased Compression

Monitoring of the state of electromagnetic fuel injectors of gasoline engines with distributed fuel injection systems

Methods for estimating the durability of the needle bearing of the piston head of the connecting rod of a transportation diesel