Abstract:Lepidolite has recently become valued as an important lithium ore resource due to the rapidly increasing demand for lithium (Li) for lithium-ion batteries (LIBs). However, existing processes to extract Li from lepidolite are still difficult and uneconomical, since the amount of lithium contained is typically low. Here, a fluorine-based chemical method was proposed to enhance the lithium extraction and utilize the 2–4% F from lepidolite. Additionally, a mixture of hydrofluoric and sulfuric acid (HF/H2SO4) was employed to theoretically investigate the reaction mechanism of the fluorine-based chemical method, since HF molecules are main reaction forms in the reaction. The results showed that the HF/ore ratio played a dominant role in the acid treatment, especially in the generation of fluorides. The added H2SO4 slightly accelerated the dissolution and affected the coordination equilibrium between Al3+ and F−. The dissolution conditions were also optimized that 98% of Li and 90% of Rb and Cs were efficiently converted into lixivium as sulfates using an ore/HF/H2SO4 ratio of 1:2:3.5 (g/mL/mL) at 85 °C for 3 h. Lepidolite was selectively dissolved over quartz, resulting in the relatively selective leaching of Li over Si and leaving amorphous SiO rich layers and K2SiF6 in the residue, which will be beneficial for the downstream processes of purification and separation. This investigation leads to advances in the understanding of the dissolution behavior with this fluorine-based chemical method and reflects the application potential of introducing fluorine to utilize lepidolite.

Kinetics of leaching lithium from lepidolite using mixture of hydrofluoric and sulfuric acid

Enhanced acid treatment to extract lithium from lepidolite with a fluorine-based chemical method

Enhanced lithium leaching from lepidolite in continuous tubular reactor using H2SO4+H2SiF6 as lixiviant

Recovery of Lithium from Lepidolite by Sulfuric Acid and Separation of Al/Li by Nanofiltration

Lithium fluoride dissolution in sulfuric acid solution: Optimization and application in the extraction of lithium from fluorinated α-spodumene

Enhanced lithium extraction from α-spodumene with fluorine-based chemical method: A stepwise heat treatment for fluorine removal

Recovery lithium and potassium from lepidolite via potash calcination-leaching process

Synthesis of Lithium Fluoride from Spent Lithium Ion Batteries

Efficient Extraction of Lithium from Calcined Kaolin Lithium Clay with Dilute Sulfuric Acid

Sintering Mechanism and Leaching Kinetics of Low-Grade Mixed Lithium Ore and Limestone

Kinetics and Mechanism of Lithium Extraction from Α-Spodumene in Potassium Hydroxide Solution

Efficient Extraction of Lithium and Rubidium from Lepidolite by Medium-Temperature Chlorination Roasting-Water Leaching Process

Leaching kinetics of fluorine during the aluminum removal from spent Li-ion battery cathode materials

Efficient Mineralization of Lithium Bis(pentafluoroethanesulfonyl)imide and Related Electrolyte Fluorochemicals Using Superheated Water

Sulfuric acid leaching of ball-milling activated FePO4 residue after lithium extraction from spent lithium iron phosphate cathode powder

Recycling of lithium and fluoride from LiF wastewater from LiF synthesis industry by solvent extraction

Leaching performance of Al-bearing spent LiFePO4 cathode powder in H2SO4 aqueous solution

Generating lithium fluoride-abundant interphase on layered lithium-rich oxide cathode with lithium 1,1,2,2,3,3-hexafluoropropane-1,3-disulfonimide

Low-Acid Leaching for Preferential Lithium Extraction and Preparation of Lithium Carbonate from Rare Earth Molten Salt Electrolytic Slag

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching