Abstract:Larger-sized primary carbides lead to stress concentration during the application of H13 hot-work die steel, resulting in microcracks and fatigue failure. Rare earth was usually added to modify the carbides and inclusions. The existing literature is reviewed on the effect of rare earth on primary carbides in H13 steel. A comprehensive review on the effect of rare earth on the characteristics of primary carbides, i.e., number, size, morphology, and thermal stability in H13 steel, was done. The precipitation mechanism and nucleation of primary carbides with rare earth were summarized. The position and form of rare earth in steel and their effects on alloying elements segregation were reviewed. The addition techniques of rare earth in H13 steel were compared, and the prospects for other uncommon rare earth and emerging technology were present. Based on the current references, it can be known that adding rare earth facilitated refined and dispersed primary carbides. The size of primary carbides would be reduced, and their morphology would be improved because the rare earth inclusions formed in H13 steel can act as nucleation cores for γ-Fe or δ-Fe, refining the dendritic structure. Besides, the number of primary carbides at grain boundaries would be significantly reduced. However, rare earth had little impact on thermal stability. The nucleation of primary carbides tended to be inhibited due to the modification of inclusions by rare earth which were likely to be nucleation cores for primary carbides. Rare earth had been reported to affect the mechanism and process of primary carbide precipitation. Additionally, the addition of rare earth can inhibit the segregation of alloying elements and carbon diffusion by calculation. Thus, laboratory experiments and theoretical calculations need to be conducted to study the states and evolution of rare earth steels.

Distribution Characteristics and Thermal Stability of Primary Carbide in Cast Ce-H13 Steel

Mechanical Properties and Thermal Stability of Carbide Dispersion Strengthened CLF-1 Steel

Study on modification of primary carbides and improvement of properties in H13 steel by CeO 2 nanoparticles addition

Cerium Addition Effect on Modification of Inclusions, Primary Carbides and Microstructure Refinement of H13 Die Steel

Effect of Carbide Precipitation on Hardness and Wear Resistance of H13 Steel

Effect of Ti and rare earth on microsegregation and large-sized precipitates of H13 steel

Dissolution of Large‐Sized Primary Carbides in 6Cr13 Continuous Casting Slabs during High‐Temperature Homogenization

Effect of rare earth on primary carbides in H13 die steel and their addition method: a review

Effect of Cerium Addition on Microstructure and Mechanical Properties of As-Cast High Grade Knives Steel

Investigation of Primary Carbides in a Commercial-Sized Electroslag Remelting Ingot of H13 Steel

Effect of Carbides on Thermos-Plastic and Crack Initiation and Expansion of High-Carbon Chromium-Bearing Steel Castings

Evolutions of Microstructure by Cerium Treatment in As‐Cast M2 High‐Speed Steel

Carbides precipitation and kinetics of H13 steel subjected to deep cryogenic treatment

Effects of Ti and N Contents on the Characteristic Evolution and Thermal Stability of MC Carbonitrides Holding at 1250 °C in H13 Die Steel

Effect of cerium on the primary carbides and inclusions in electroslag remelted M35 high speed steel

Effect of Ce Addition on Inclusions and Primary Carbide Network in AISI 440C Bearing Steel

Carbide Evolution for a Quenched and Tempered Dievar Steel

Effect of heating temperature and holding time on carbide of GCr15SiMn bearing steel

Study on Evolution Behavior of Carbides in Industrial‐Grade American Iron and Steel Institute M35 High‐Speed Steel Produced by Electroslag Remelting

Carbide Precipitation Behavior of High‐Alloy Steel During Solidification and Cooling Process

Effect of TiC Addition on the High-Temperature Hardness and the Carbide Stability in Al0.2CoCrFeNi1.5Ti High-Entropy Alloy