Abstract:Larger-sized primary carbides lead to stress concentration during the application of H13 hot-work die steel, resulting in microcracks and fatigue failure. Rare earth was usually added to modify the carbides and inclusions. The existing literature is reviewed on the effect of rare earth on primary carbides in H13 steel. A comprehensive review on the effect of rare earth on the characteristics of primary carbides, i.e., number, size, morphology, and thermal stability in H13 steel, was done. The precipitation mechanism and nucleation of primary carbides with rare earth were summarized. The position and form of rare earth in steel and their effects on alloying elements segregation were reviewed. The addition techniques of rare earth in H13 steel were compared, and the prospects for other uncommon rare earth and emerging technology were present. Based on the current references, it can be known that adding rare earth facilitated refined and dispersed primary carbides. The size of primary carbides would be reduced, and their morphology would be improved because the rare earth inclusions formed in H13 steel can act as nucleation cores for γ-Fe or δ-Fe, refining the dendritic structure. Besides, the number of primary carbides at grain boundaries would be significantly reduced. However, rare earth had little impact on thermal stability. The nucleation of primary carbides tended to be inhibited due to the modification of inclusions by rare earth which were likely to be nucleation cores for primary carbides. Rare earth had been reported to affect the mechanism and process of primary carbide precipitation. Additionally, the addition of rare earth can inhibit the segregation of alloying elements and carbon diffusion by calculation. Thus, laboratory experiments and theoretical calculations need to be conducted to study the states and evolution of rare earth steels.

Effect of Carbide Precipitation on Hardness and Wear Resistance of H13 Steel

Effect of microstructure on wear resistance during high temperature carburization heat treatment of heavy-duty gear steel

Carbides Dissolution in 5Cr15MoV Martensitic Stainless Steel and New Insights into Its Effect on Microstructure and Hardness

Carbides precipitation and kinetics of H13 steel subjected to deep cryogenic treatment

Effects of Cooling Rate on the Precipitation Behavior of Grain Boundary Carbide and Corrosion Resistance of 5cr15mov Stainless Steel

Effect of carbide precipitation behavior at high temperatures on microstructure and mechanical properties of M50 steel

Distribution Characteristics and Thermal Stability of Primary Carbide in Cast Ce-H13 Steel

Carbide precipitation during tempering of Hybrid Steel 60

Microstructural Evolution and Carbide Precipitation in A Heat-Treated H13 Hot Work Mold Steel

Dissolution Behavior of Carbide in 4cr13 Martensitic Stainless Steel During Austenitizing

Tailoring the Microstructure and Mechanical Properties of H13 Steel by Controlling the Pre-Precipitation of VC Carbides from Austenite

Effect of heating temperature and holding time on carbide of GCr15SiMn bearing steel

Hardening Through an Ultrafine Carbide Precipitation in Austenite of a Low-Carbon Steel Containing Titanium and Tungsten

Carbide Evolution for a Quenched and Tempered Dievar Steel

Effect of rare earth on primary carbides in H13 die steel and their addition method: a review

The carbides, tensile properties, and work-hardening behavior of annealed H13 die steels with varied yttrium contents

Microstructure and Tempering Softening Mechanism of Modified H13 Steel with the Addition of Tungsten, Molybdenum, and Lowering of Chromium

Improvement of wear and hot melt loss resistance of metal carbide layers on H13 steel

Effect of Cryosoaking Period and Soft-Tempering Temperature on Wear Behavior of AISI H13 Steel

Characterization of Carbide Precipitation During Tempering for Quenched Dievar Steel

Effects of Microstructure Evolution on Fretting Wear Behaviors of 25CrNi2MoVE Steel under Different Tempering States