Abstract:Aspheric thin-walled crucibles with large diameters are widely used for photovoltaics and semiconductor industries, while they have hard-brittle and aspheric characteristics. Nevertheless, these crucibles strictly require atomic surfaces and high material removal rate (MRR). This is a challenge for chemical mechanical polishing (CMP). To break this challenge, a novel green CMP was developed for fused silica, containing ceria, lanthana, hydrogen peroxide, diethylene triaminepentaacetic acid pentasodium, carboxymethyl cellulose sodium and guanidine carbonate. After CMP, surface roughness Ra of 0.115 is obtained at a scanning area of 5 × 5 μm2 measured by atomic force microscopy, and MRR is 563 nm/min. In such an atomic surface, the MRR is the highest compared with those published previously. Transmission electron microscopy confirms that the thickness of damaged layer after CMP is only 2.63 nm. A novel approach of robot floating polishing is proposed for aspheric crucibles with a diameter of 810 mm and a height of 580 mm. Using the developed CMP, surface roughness Sa of 0.178 nm on inner surface of an aspheric thin-walled crucible is achieved under a measurement area of 50 × 50 μm2. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance reveal that the content of Ce3+ increased from 28.54 to 43.76 %. Through Raman, XPS and Fourier transform infrared spectroscopy, CMP mechanisms are elucidated. Densified damaged layer on the surface of fused silica was induced by the transformation of surface structure from six-membered to four- or three-membered network. Ce-OH and Si-OH were formed between fused silica and ceria abrasives, forming Ce-O-Si by condensation reaction of dehydration. The developed green CMP and approach provide new pathway to polish and manufacture atomic surfaces for aspheric thin-walled crucibles with large diameters.

Nano-scale surface of ZrO2 ceramics achieved efficiently by peanut-shaped and heart-shaped SiO2 abrasives through chemical mechanical polishing

Surface Planarization of Zirconia Ceramic Achieved by Polyacrylamide Grafted Nanodiamond Composite Abrasives Through Chemical Mechanical Polishing

Preparation of the rod-shaped SiO2@C abrasive and effects of its microstructure on the polishing of zirconia ceramics

Preparation of the Nanodiamond@SiO2 Abrasive and its Effect on the Polishing Performance of Zirconia Ceramics

Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters

Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing

Mechanism of chemical and mechanical mutual promotion in photocatalysis-assisted chemical mechanical polishing for single-crystal SiC

Development of core–shell SiO 2 @A-TiO 2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Unprecedented atomic surface of silicon induced by environmentally friendly chemical mechanical polishing

Polishing of Zirconia Ceramics by Chemically-Induced Micro-Nano Bubbles

An experimental investigation of scan trajectory into the underwater femtosecond laser polishing SiC ceramic

Tribochemical mechanisms of abrasives for SiC and sapphire substrates in nanoscale polishing

Trivalent lanthanum and ytterbium doped meso-silica/ceria abrasive systems toward chemical mechanical polishing (CMP) and ultraviolet irradiation-assisted photochemical mechanical polishing (PCMP)

Investigation on Polishing of Zirconia Ceramics Using Magnetic Compound Fluid: Relationship Between Material Removal and Surface Roughness

Preparation of Non-Spherical Silica Composite Abrasives by Lanthanum Ion-Induced Effect and Its Chemical–mechanical Polishing Properties on Sapphire Substrates

Photocatalytic assisted chemical mechanical polishing for silicon carbide using developed ceria coated diamond core-shell abrasives

Novel green chemical mechanical polishing of fused silica through designing synergistic CeO 2 /h-BN abrasives with lubricity

A Study on Tangential Ultrasonic-Assisted Mirror Grinding of Zirconia Ceramic Curved Surfaces

Angstrom surface with high material removal rate for quartz glass induced by silk dissolved novel green chemical mechanical polishing

Facile preparation of robust superhydrophobic ceramic surfaces with mechanical stability, durability, and self-cleaning function