Development and Applications of a Micro-Scale pH Probe for Localized pH Measurements with Scanning Ion-Conductance Microscopy

Celeste A. Morris,Chiao-Chen Chen,Lane Baker

DOI: https://doi.org/10.1149/ma2012-01/38/1398

2012-02-15

ECS Meeting Abstracts

Abstract:Abstract not Available.

What problem does this paper attempt to address?

Scanning Probe Imaging of Surface Ion Conductance in an Anion Exchange Membrane

Qinggang He,Ivan T. Lucas,Xiaoming Ren,Robert Kostecki

DOI: https://doi.org/10.1149/ma2011-02/16/913

2011-01-01

ECS Meeting Abstracts

Abstract:Abstract not Available.
Microfluidic Chip System Integrated with Light Addressable Potentiometric Sensor (LAPS) for Real-Time Extracellular Acidification Detection

Tao Liang,Chenlei Gu,Ying Gan,Qian Wu,Chuanjiang He,Jiawei Tu,Yuxiang Pan,Yong Qiu,LiuBing Kong,Hao Wan,Ping Wang

DOI: https://doi.org/10.1016/j.snb.2019.127004

IF: 9.221

2019-01-01

Sensors and Actuators B Chemical

Abstract:Metabolism is a common biological mechanism in living cells. Acidification plays an important role in cell metabolism, in which the extracellular pH change is used to indicate the vitality of cells. For extracellular detection of cell metabolic substances, light addressable potentiometric sensor (LAPS) has many advantages, such as high sensitivity, easy encapsulation, and convenient integration with microfluidic system for cell experiments. LAPS is a spatially resolved biochemical sensor based on field-effect. In this work, we present a microfluidic system integrated with LAPS for real-time extracellular acidification rate (ECAR) detection. The functions of traditional microphysiometer are achieved with simpler structure devices. Polydimethylsiloxane (PDMS) chamber was manufactured for cell culture, and microfluidic flow paths were used for medium and drug delivery. A bubble trap device was applied to eliminate air bubbles generated in microfluidics. Characteristic tests and cell metabolism experiments were carried out to determine the performance of LAPS by monitoring the pH change of hepatoma HepG2 cells. Glucose and doxorubicin were delivered to the cell chamber to verify the effects of the drug. The pH sensitivity of LAPS is 335.5 nA/pH at the working point in constant voltage mode. The ECAR of HepG2 cells was -48.53 mpH/min in normal glucose medium (25 mM), and it changed to -114.42 mpH/min in high glucose medium (125 mM) and -17.88 mpH/min under the effect of doxorubicin (10 mu M). The results show that the microfluidic LAPS presents good performance in real-time detection of cell acidification and provides a convenient means of assessing cellular specificity of drugs. The modular structure and high expandability make the microfluidic LAPS has good potential in the application of organ-on-chip.
Recent Developments of High-Resolution Chemical Imaging Systems Based on Light-Addressable Potentiometric Sensors (Lapss)

Tao Liang,Yong Qiu,Ying Gan,Jiadi Sun,Shuqi Zhou,Hao Wan,Ping Wang

DOI: https://doi.org/10.3390/s19194294

IF: 3.9

2019-01-01

Sensors

Abstract:A light-addressable potentiometric sensor (LAPS) is a semiconductor electrochemical sensor based on the field-effect which detects the variation of the Nernst potential on the sensor surface, and the measurement area is defined by illumination. Thanks to its light-addressability feature, an LAPS-based chemical imaging sensor system can be developed, which can visualize the two-dimensional distribution of chemical species on the sensor surface. This sensor system has been used for the analysis of reactions and diffusions in various biochemical samples. In this review, the LAPS system set-up, including the sensor construction, sensing and substrate materials, modulated light and various measurement modes of the sensor systems are described. The recently developed technologies and the affecting factors, especially regarding the spatial resolution and temporal resolution are discussed and summarized, and the advantages and limitations of these technologies are illustrated. Finally, the further applications of LAPS-based chemical imaging sensors are discussed, where the combination with microfluidic devices is promising.
Microvolume field-effect pH sensor for the scanning probe microscope

S. R. Manalis,E. B. Cooper,P. F. Indermuhle,P. Kernen,P. Wagner,D. G. Hafeman,S. C. Minne,C. F. Quate

DOI: https://doi.org/10.1063/1.125942

IF: 4

2000-02-21

Applied Physics Letters

Abstract:A pH sensitive scanning probe is realized by integrating a micron-sized field-effect sensor onto a cantilever designed for an atomic force microscope. The hybrid device, called a scanning probe potentiometer (SPP), is capable of measuring pH gradients over a sample surface. The device was used to profile the pH across a reservoir of laminar streams created by fluid flow in an array of microfluidic channels of varying pH. When a single SPP scanned, a 1.5 mm reservoir in a 10-channel array, the pH profile was measured in less than 1 min with a spatial resolution of 10 μm and sensitivity of less than 0.01 pH units.

physics, applied
Development of a New Microscopic Four-Point AFM Probe for the Measurement of Local Electrical Conductivity

bingfeng ju,yang ju,masumi saka

DOI: https://doi.org/10.1115/IPACK2005-73433

2005-01-01

Abstract:A microscopic four-point atomic force microscope (AFM) probe with concomitant experimental technique for local conductivity measurement is presented. A silicon nitride based AFM contact-mode probe with a V-shaped tip, which patterned by using the conventional photolithography method, is selected. The probe is then etched to four parallel isolated electrodes for the purpose of performing current input and electrical potential drop measurement. The new probe not only inherits the function of surface topography generating but also has the capability of characterizing the local conductivity simultaneously. The nanoresolution position control mechanism of AFM allows the probe scanning across micrometers sized area and creating high spatial resolution map of the in-plane conductivities. Experiments have shown the microscopic four-point probe to be mechanically flexible and robust. The repeatable conductivity measurements on the surface of aluminum and indium tin oxide (ITO) thin films indicate the technique has potential application for characterizing the devices and materials in microscale.
CMOS electrochemical pH localizer-imager

Han Sae Jung,Woo-Bin Jung,Jun Wang,Jeffrey Abbott,Adrian Horgan,Maxime Fournier,Henry Hinton,Young-Ha Hwang,Xavier Godron,Robert Nicol,Hongkun Park,Donhee Ham

DOI: https://doi.org/10.1126/sciadv.abm6815

IF: 13.6

2022-07-28

Science Advances

Abstract:pH controls a large repertoire of chemical and biochemical processes in water. Densely arrayed pH microenvironments would parallelize these processes, enabling their high-throughput studies and applications. However, pH localization, let alone its arrayed realization, remains challenging because of fast diffusion of protons in water. Here, we demonstrate arrayed localizations of picoliter-scale aqueous acids, using a 256-electrochemical cell array defined on and operated by a complementary metal oxide semiconductor (CMOS)–integrated circuit. Each cell, comprising a concentric pair of cathode and anode with their current injections controlled with a sub-nanoampere resolution by the CMOS electronics, creates a local pH environment, or a pH "voxel," via confined electrochemistry. The system also monitors the spatiotemporal pH profile across the array in real time for precision pH control. We highlight the utility of this CMOS pH localizer-imager for high-throughput tasks by parallelizing pH-gated molecular state encoding and pH-regulated enzymatic DNA elongation at any selected set of cells.

multidisciplinary sciences
Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Andreas Mark,Nicolas Helfricht,Astrid Rauh,Jinqiao Xue,Patrick Knoedler,Thorsten Schumacher,Matthias Karg,Binyang Du,Markus Lippitz,Georg Papastavrou

DOI: https://doi.org/10.1038/s41598-019-56716-0

IF: 4.6

2019-01-01

Scientific Reports

Abstract:The combination of atomic force microscopy (AFM) with nanofluidics, also referred to as FluidFM, has facilitated new applications in scanning ion conductance microscopy, direct force measurements, lithography, or controlled nanoparticle deposition. An essential element of this new type of AFMs is its cantilever, which bears an internal micro-channel with a defined aperture at the end. Here, we present a new approach for in-situ characterization of the internal micro-channels, which is non-destructive and based on electrochemical methods. It allows for probing the internal environment of a micro-channeled cantilever and the corresponding aperture, respectively. Acquiring the streaming current in the microchannel allows to determine not only the state of the aperture over a wide range of ionic strengths but also the surface chemistry of the cantilever's internal channel. The high practical applicability of this method is demonstrated by detecting the aspiration of polymeric, inorganic and hydrogel particles with diameters ranging from several mu m down to 300 nm. By verifying in-situ the state of the aperture, i.e. open versus closed, electrophysiological or nano-deposition experiments will be significantly facilitated. Moreover, our approach is of high significance for direct force measurements by the FluidFM-technique and sub-micron colloidal probes.
Fabrication of a microscopic four-point probe and its application to local conductivity measurement

Bing-Feng Ju,Yang Ju,Masumi Saka

DOI: https://doi.org/10.1088/0960-1317/15/12/009

2005-01-01

Journal of Micromechanics and Microengineering

Abstract:A microscopic four-point probe for local conductivity measurement is presented. The silicon nitride based atomic force microscope (AFM) probe with a V-shaped two-dimensional sliced structure tip is patterned by using a conventional photolithography method. The probe is then etched to four parallel electrodes isolated from each other, for the purpose of performing current input and electrical potential drop measurement. The newly developed four-point AFM probe not only inherits the function of generating AFM surface topography but also has the capability of characterizing the local conductivity simultaneously. The nano-resolution position control mechanism of AFM allows the probe to scan across micrometer sized areas and create a high spatial resolution map of the in-plane conductivities. Experiments have shown this four-point AFM probe to be mechanically flexible and robust. The repeatable conductivity measurements on the surface of aluminum and indium tin oxide (ITO) thin films indicate the technique, which is based on this four-point AFM probe, has potential application for characterizing devices and materials in microscale.
NOVEL AFM PROBE FOR LOCAL CONDUCTIVITY MEASUREMENT

Bing-Feng Ju,Yang Ju,Masumi Saka

DOI: https://doi.org/10.1142/s0219581x06004565

2006-01-01

International Journal of Nanoscience

Abstract:A new atomic force microscope (AFM) probe for local conductivity measurement is presented. This silicon nitride based probe with a V-shaped two-dimensional sliced structure tip is patterned by using conventional photolithography method. The probe is then etched to four parallel electrodes that isolated from each other, for the purpose of performing current input and electrical potential drop measurement. The newly developed four-point AFM probe not only inherits the function of AFM surface topography generating but also has the capability of characterizing the local conductivity simultaneously. The nanoresolution position control mechanism of AFM allows the probe scanning across micrometers sized area and creating high spatial resolution map of the in-plane conductivities. Experiments have shown this four-point AFM probe to be mechanically flexible and robust. The repeatable conductivity measurements on the surface of aluminum and indium tin oxide (ITO) thin films indicate this four-point AFM probe technique has potential applications for characterizing devices and materials in microscale.
Structure Modification of M-AFM Probe for the Measurement of Local Conductivity

A. Fujimoto,L. Zhang,A. Hosoi,Y. Ju

DOI: https://doi.org/10.1007/s00542-010-1175-9

2010-01-01

Microsystem Technologies

Abstract:In order to realize the evaluation of electrical properties of materials in nanometer scale, a method to measure the local conductivity of materials was demonstrated. A microwave atomic force microscope (M-AFM) probe which can propagate and emit microwave signals was fabricated. An open structure of a waveguide at the tip of the probe was introduced by focused ion beam fabrication. The M-AFM combined a network analyzer and an AFM was used to measure a sample. The amplitude and phase of the reflection coefficient of the microwave signals were measured, thereby the electrical conductivities of metallic materials were determined. The conductivity obtained by this method is agreement well with that measured by a high-frequency conductometry.
Developments of Scanning Electrochemical Probes and Their Applications in Studying of Localized Corrosions

LIN Chang-Jian,LI Yan,LIN Bin,HU Rong-gang,ZHANG Min,ZHUO Xiang-dong,DU Rong-gui

DOI: https://doi.org/10.61558/2993-074x.1966

2009-01-01

Abstract:The electrochemical inhomogeneities always exist at the interface of metal/solution,and play an important and often controlling role in localized corrosion of metals in a given environment.It is necessary to develop in situ imaging techniques for further studying the electrochemical and environmental inhomogeneities at the interface of metal/solution for the localized corrosion system.In this paper,various techniques with spatial resolution,such as scanning micro reference electrode(SMET),scanning electrochemical microscope(SECM),atomic force microscope(AFM),and scanning Kelvin probe(SKP),and their applications in corrosion studies were briefly reviewed.The chemical probes and array electrode have been developed.It was concentrated to describe our newly developed techniques of the scanning electrochemical probes,including SMET with highly spatial resolution combined system of SMET/STM.The development and application of the various scanning electrochemical probes are definally helpful for imaging electrochemical inhomogeneities on electrode surface and further understanding the mechanism for the localized corrosion of metals.
Characterization of Membrane Patch-Ion Channel Probes for Scanning Ion Conductance Microscopy.

Cheng Zhu,Yucheng Xiao,T. Cummins,J. Hou,Yuhan Zeng,L. A. Baker,W. Shi

DOI: https://doi.org/10.1002/smll.201702945

IF: 13.3

2018-05-01

Small

Abstract:Integration of dual-barrel membrane patch-ion channel probes (MP-ICPs) to scanning ion conductance microscopy (SICM) holds promise of providing a revolutionized approach of spatially resolved chemical sensing. A series of experiments are performed to further the understanding of the system and to answer some fundamental questions, in preparation for future developments of this approach. First, MP-ICPs are constructed that contain different types of ion channels including transient receptor potential vanilloid 1 and large conductance Ca2+ -activated K+ channels to establish the generalizability of the methods. Next, the capability of the MP-ICP platforms in single ion channel activity measurements is proved. In addition, the interplay between the SICM barrel and the ICP barrel is studied. For ion channels gated by uncharged ligands, channel activity at the ICP barrel is unaffected by the SICM barrel potential; whereas for ion channels that are gated by charged ligands, enhanced channel activity can be obtained by biasing the SICM barrel at potentials with opposite polarity to the charge of the ligand molecules. Finally, a proof-of-principle experiment is performed and site-specific molecular/ionic flux sensing is demonstrated at single-ion-channel level, which show that the MP-ICP platform can be used to quantify local molecular/ionic concentrations.

Chemistry,Medicine,Materials Science
Fabrication of Composite Scanning Micro Ph Electrode and Its Application in Localized Corrosion

MH Shao,RS Huang,RG Hu,CJ Lin

DOI: https://doi.org/10.3866/pku.whxb20021014

2002-01-01

Abstract:A novel composite scanning micro pH electrode was fabricated. The lrO(x)-pH electrode produced in a carbonate melt exhibited high stability, a fast potential response and ideal Nernstian response. The slope of the electrode at 15 degreesC was 56. 8 mV/pH, which was very close to the theoretical value. The 90% potential response time for a pH change from 1. 75 to 13. 90 was less than 0. 5 s. The composite scanning micro pH electrode is a promising apparatus for detecting the pH distribution on metal/solution interface. pH image on the surface of Al/Cu galvanic couple showed that both the anodic and cathodic areas could be sensed well. Localized corrosion took place on the interface of Al/Cu couple. The localized corrosion developed with time and pH value around the pitting decreased gradually.
Analytical Applications of Scanning Ion Conductance Microscopy: Measuring Ions and Electrons

Myung-hoon Choi,Cody W. Leasor,Lane A. Baker

DOI: https://doi.org/10.1007/11663_2021_9

2021-01-01

Bioanalytical Reviews

Abstract:Applications of SICM extend well beyond topographic imaging. Opportunities to measure ion concentrations or electron transfer reactions with SICM probes have proven particularly powerful approaches. Electrochemical imaging applications of SICM have advanced rapidly and benefit from simplicity in probe (electrode) design, advanced methods of feedback, and developments in instrumentation for imaging. Here we consider select analytical applications of the scanning ion conductance microscope, considering first methods to measure ions, and second methods to measure electrons. Special attention is paid to the design of the probe and analytical caveats considered in such measurements.
Scanning Ion Conductance Microscopy for Studying Biological Samples

Patrick Happel,Denis Thatenhorst,Irmgard D. Dietzel,Irmgard Dietzel

DOI: https://doi.org/10.3390/s121114983

IF: 3.9

2012-11-06

Sensors

Abstract:Scanning ion conductance microscopy (SICM) is a scanning probe technique that utilizes the increase in access resistance that occurs if an electrolyte filled glass micro-pipette is approached towards a poorly conducting surface. Since an increase in resistance can be monitored before the physical contact between scanning probe tip and sample, this technique is particularly useful to investigate the topography of delicate samples such as living cells. SICM has shown its potential in various applications such as high resolution and long-time imaging of living cells or the determination of local changes in cellular volume. Furthermore, SICM has been combined with various techniques such as fluorescence microscopy or patch clamping to reveal localized information about proteins or protein functions. This review details the various advantages and pitfalls of SICM and provides an overview of the recent developments and applications of SICM in biological imaging. Furthermore, we show that in principle, a combination of SICM and ion selective micro-electrodes enables one to monitor the local ion activity surrounding a living cell.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Novel Dual Pt-Pt/IrOx Ultramicroelectrode for Ph Imaging Using SECM in Both Potentiometric and Amperometric Modes

Zejie Zhu,Zhenni Ye,Qinhao Zhang,Jianqing Zhang,Fahe Cao

DOI: https://doi.org/10.1016/j.elecom.2018.01.018

IF: 5.443

2018-01-01

Electrochemistry Communications

Abstract:Potentiometric Scanning Electrochemical Microscopy (SECM) allows the pH distribution at electrode/electrolyte interfaces to be mapped at the micrometer and submicrometer scale using ion-selective ultramicroelectrodes (UMEs) as scanning probes. However, this technique lacks precise control of the tip-to-substrate distance. Herein we propose a novel dual Pt-Pt/IrOx UME for local in situ pH visualization of 316L stainless steel (316L-SS) corrosion processes with precise tip-substrate distance control using both amperometric and potentiometric SECM modes. Simulations based on COMSOL and experimental approach curves obtained with this dual UME configuration are used to precisely establish the tip-substrate distance. Higher pH values were observed for smaller tip-substrate separations when this probe configuration is used with bulk electrolyte of the same pH. Furthermore, during the corrosion process local anodic and cathodic zones were observed to form, disappear and regenerate at a vertical tip-substrate distance of 12 mu m as a result of the localized corrosion and repassivation of 316L-SS.
Probing Local Electromechanical Effects in Highly Conductive Electrolytes.

Nina Balke,Alexander Tselev,Thomas M. Arruda,Stephen Jesse,Ying-Hao Chu,Sergei V. Kalinin

DOI: https://doi.org/10.1021/nn3038868

IF: 17.1

2012-01-01

ACS Nano

Abstract:The functionality of a variety of materials and devices is strongly coupled with electromechanical effects which can be used to characterize their functionality. Of high interest is the investigation of these electromechanical effects on the nanoscale which can be achieved by using scanning probe microscopy. Here, an electrical bias is applied locally to the scanning probe tip, and the mechanical sample response is detected. In some applications with electromechanical phenomena, such as energy storage or for biological samples, a liquid environment is required to provide full functionality and sample stability. However, electromechanical sample characterization has mostly been applied in air or under vacuum due to the difficulties of applying local electric fields in a conductive environment. Here, we present a detailed study of piezoresponse force microscopy of ferroelectric samples in liquid environments as a model system for electromechanical effects in general. The ionic strength of the liquid is varied, and possibilities and limitations of the technique are explored. Numerical simulations are used to explain the observed phenomena and used to suggest strategies to work in liquid environments with high ionic strength.
Large scale micro-photometry for high resolution pH-characterization during electro-osmotic pumping and modular micro-swimming

Ran Niu,Stanislav Khodorov,Julian Weber,Alexander Reinmüller,Thomas Palberg

DOI: https://doi.org/10.1088/1367-2630/aa9545

2017-11-29

New Journal of Physics

Abstract:Micro-fluidic pumps as well as artificial micro-swimmers are conveniently realized exploiting phoretic solvent flows based on local gradients of temperature, electrolyte concentration or pH. We here present a facile micro-photometric method for monitoring pH gradients and demonstrate its performance and scope on different experimental situations including an electro-osmotic pump and modular micro-swimmers assembled from ion exchange resin beads and polystyrene colloids. In combination with the present microscope and DSLR camera our method offers a 2 μm spatial resolution at video frame rate over a field of view of 3920 × 2602 μm2. Under optimal conditions we achieve a pH-resolution of 0.05 with about equal contributions from statistical and systematical uncertainties. Our quantitative micro-photometric characterization of pH gradients which develop in time and reach out several mm is anticipated to provide valuable input for reliable modeling and simulations of a large variety of complex flow situations involving pH-gradients including artificial micro-swimmers, microfluidic pumping or even electro-convection.

physics, multidisciplinary
Real-Time pH Sensor in Bacterial Microenvironments Using Liquid Crystal Core-Shell Microspheres

Yaoshuang Xie,Yuxuan Li,Haifeng Lin,Xiaorui Wang,Wenjun Liao,Zeyang Liu,Ling Lin

DOI: https://doi.org/10.1021/acs.analchem.4c02040

2024-07-16

Abstract:It is well-known that the bacterial microenvironment imposes restrictions on the growth and behavior of bacteria. The localized monitoring of microenvironmental factors is appreciated when consulting bacterial adaptation and behavior in the presence of chemical or mechanical stimuli. Herein, we developed a novel liquid crystal (LC) biosensor in a microsphere configuration for real-time 3D monitoring of the bacteria microenvironment, which was implemented by a microfluidic chip. As a proof of concept, a LC gel (LC-Gel) microsphere biosensor was prepared and employed in the localized pH changes of bacteria by observing the configuration change of LC under polarized optical microscopy. Briefly, the microsphere biosensor was constructed in core-shell configuration, wherein the core contained LCE7 (a nematic LC) doped with 4-pentylbiphenyl-4'-carboxylic acid (PBA), and the shell encapsulated the bacteria. The protonation of carboxyl functional groups of the PBA induced a change in charge density on the surface of LCE7 and the orientation of E7 molecules, resulting in the transitions of the LC nucleus from axial to bipolar. The developed LC-Gel microspheres pH sensor exhibited its dominant performance on localized pH real-time sensing with a resolution of 0.1. An intriguing observation from the prepared pH biosensor was that the diverse bacteria impelled distinct acidifying or alkalizing effects. Overall, the facile LC-Gel microsphere biosensor not only provides a versatile tool for label-free, localized pH monitoring but also opens avenues for investigating the effects of chemical and mechanical stimuli on cellular metabolism within bacterial microenvironments.
Design and Validation of a New Ratiometric Intracellular Ph Imaging Probe Using Lanthanide-Doped Upconverting Nanoparticles

Shuoren Du,Javier Hernandez-Gil,Hao Dong,Xiaoyu Zheng,Guangming Lyu,Manuel Banobre-Lopez,Juan Gallo,Ling-dong Sun,Chun-hua Yan,Nicholas J. Long

DOI: https://doi.org/10.1039/c7dt02418e

IF: 4

2017-01-01

Dalton Transactions

Abstract:pH homeostasis is strictly controlled at a subcellular level. A deregulation of the intra/extra/subcellular pH environment is associated with a number of diseases and as such, the monitoring of the pH state of cells and tissues is a valuable diagnostic tool. To date, only a few tools have been developed to measure the pH in living cells with the spatial resolution needed for intracellular imaging. Among the techniques available, only optical imaging offers enough resolution and biocompatibility to be proposed for subcellular pH monitoring. We present herein a ratiometric probe based on upconversion nanoparticles modified with a pH sensitive moiety for the quantitative imaging of pH at the subcellular level in living cells. This system provides the properties required for live cell quantitative imaging i.e. positive cellular uptake, biocompatibility, long wavelength excitation, sensitive response to pH within a biologically relevant range, and self-referenced signal.

Development and Applications of a Micro-Scale pH Probe for Localized pH Measurements with Scanning Ion-Conductance Microscopy

Scanning Probe Imaging of Surface Ion Conductance in an Anion Exchange Membrane

Microfluidic Chip System Integrated with Light Addressable Potentiometric Sensor (LAPS) for Real-Time Extracellular Acidification Detection

Recent Developments of High-Resolution Chemical Imaging Systems Based on Light-Addressable Potentiometric Sensors (Lapss)

Microvolume field-effect pH sensor for the scanning probe microscope

Development of a New Microscopic Four-Point AFM Probe for the Measurement of Local Electrical Conductivity

CMOS electrochemical pH localizer-imager

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Fabrication of a microscopic four-point probe and its application to local conductivity measurement

NOVEL AFM PROBE FOR LOCAL CONDUCTIVITY MEASUREMENT

Structure Modification of M-AFM Probe for the Measurement of Local Conductivity

Developments of Scanning Electrochemical Probes and Their Applications in Studying of Localized Corrosions

Characterization of Membrane Patch-Ion Channel Probes for Scanning Ion Conductance Microscopy.

Fabrication of Composite Scanning Micro Ph Electrode and Its Application in Localized Corrosion

Analytical Applications of Scanning Ion Conductance Microscopy: Measuring Ions and Electrons

Scanning Ion Conductance Microscopy for Studying Biological Samples

Novel Dual Pt-Pt/IrOx Ultramicroelectrode for Ph Imaging Using SECM in Both Potentiometric and Amperometric Modes

Probing Local Electromechanical Effects in Highly Conductive Electrolytes.

Large scale micro-photometry for high resolution pH-characterization during electro-osmotic pumping and modular micro-swimming

Real-Time pH Sensor in Bacterial Microenvironments Using Liquid Crystal Core-Shell Microspheres

Design and Validation of a New Ratiometric Intracellular Ph Imaging Probe Using Lanthanide-Doped Upconverting Nanoparticles