Abstract:The Scanning Electrochemical Microscope (SECM) is a nonoptical scanning microscopic instrument capable of imaging highly localized electrical currents associated with charge transfer reactions on metallic biomaterials surfaces. The SECM operates as an aqueous electrochemical cell under bipotentiostatic control with a microelectrode and sample independently biased as working electrodes. Microelectrode current and position is recorded as it is scanned very near a metallurgically polished planar sample surface. To date, the SECM has imaged metallic biomaterials surfaces in oxygen reaction rate imaging (ORRI) and ion release and deposition imaging (IRDI) modes. In ORRI, sample and microelectrode are biased at sufficiently negative potentials to reduce absorbed oxygen. As the microelectrode scans areas of active oxygen reduction, localized diffusion fields with decreased oxygen solution concentrations are encountered and resultant decrements in microelectrode current are observed. In IRDI mode the sample is positively biased and the microelectrode is negatively biased. The microelectrode detects anodic dissolution products with highest currents being observed over the most active areas. Performance of the SECM has been evaluated on Ni minigrids, gamma-1 Hg-Ag dental amalgam crystals, and sintered beads of Co-Cr-Mo alloy which represent significantly different geometries and corrosion processes to help demonstrate the potential of this instrument. The SECM is a valuable tool for imaging microelectrochemical processes on the surfaces of metallurgically polished metallic biomaterials samples and a wide variety of other surfaces of biological interest where charge transfer reactions occur. The SECM allows selective biasing of metallic biomaterials surfaces and Faradaic reactions can be selectively imaged while the surface is in the active, passive, or transpassive state.

Analytical Applications of Scanning Ion Conductance Microscopy: Measuring Ions and Electrons

Principle And Applications Of Scanning Ion Conductance Microscopy

Scanning Ion Conductance Microscopy for Studying Biological Samples

Electron Transfer/Ion Transfer Mode of Scanning Electrochemical Microscopy (secm): A New Tool for Imaging and Kinetic Studies

Nanoscale Imaging of Surface Topography and Reactivity with the Scanning Electrochemical Microscope

Probing Biosensing Interfaces with Single Molecule Localization Microscopy (SMLM)

Scanning Probe Imaging of Surface Ion Conductance in an Anion Exchange Membrane

Characterization of Membrane Patch-Ion Channel Probes for Scanning Ion Conductance Microscopy.

Scanning Electrochemical Microscopy in the 21st Century. Update 1: Five Years After.

Development of High-Speed Ion Conductance Microscopy

Scanning ion conductance microscopy of isolated metaphase chromosomes in a liquid environment

Electrochemical Microprocess by Scanning Ion-Conductance Microscopy

Simultaneous mapping of nanoscale topography and surface potential of charged surfaces by scanning ion conductance microscopy

High-Resolution Distance Dependence Interrogation of Scanning Ion Conductance Microscopic Tip-Enhanced Raman Spectroscopy Enabled by Two-Dimensional Molybdenum Disulfide Substrates

Specialized scanning ion-conductance microscope for imaging of living cells

Scanning electrochemical microscopy of metallic biomaterials: reaction rate and ion release imaging modes

Gauging Surface Charge Distribution of Live Cell Membrane by Ionic Current Change Using Scanning Ion Conductance Microscopy

Theoretical study on the effect of temperature gradient on contact-free scanning for scanning ion conductance microscopy

Detection of Nanopores with the Scanning Ion Conductance Microscopy: A Simulation Study

Measuring the Shape, Stiffness, and Interface Tension of Droplets with the Scanning Ion Conductance Microscope

Exploring the Living Cell: Applications and Advances of Scanning Electrochemical Microscopy