Abstract:In this work, the authors present a digital twin (DT) to analyse the manufacturing process of structural composites by using resin transfer moulding (RTM). During RTM, a dry textile preform is impregnated with a polymer resin injected in a closed mould. RTM is one of the most used production methods for high-performance structural composites. The DT is focused on detecting in-homogeneous resin flow produced by race-tracking channels that divert resin flow to the outlet gates of the mould, producing dry spots and lack of impregnation. The DT core contains two surrogate models based on encoder/decoder deep learning architectures, providing the fast/accurate response necessary for interrogation during manufacturing. The first surrogate acts as the disturbance detector, providing the on-the-fly representation of the fabric permeability with the only information gathered by a set of five pressure sensors distributed over the mould surface. The second offers real-time representation of a set of quantities of interests (QoI): namely, the flow progress and the pressure field inside the mould. Training of both surrogates was performed with synthetic data generated by high-fidelity multi-physics simulations of the flow progress in a porous preform by following Darcy’s law. Errors in the pressure field predictions of the surrogates are lower than 1%$$\%$$ with consultation time <50 ms, enabling encapsulation in the digital twin. The DT performance was evaluated by comparing the response against a set of RTM experiments for different race-tracking scenarios. The two most relevant novelties of the work are the use of the concept of the instantiated DT, which provides information on the current state of the process from data provided by a network of distributed sensors, and that this DT has been trained exclusively with synthetic data from multiphysics simulations while evaluated against experimental data from injection tests.

Manufacture of thin composite structures by the RTM process: Numerical simulation of the shaping operation

Meso-Macro Simulations of the Forming of 3D Non-Crimp Woven Fabrics

The Research on RTM Molding Process of Thin-wall Rib Structure of Composite Materials

Analyse of Woven Reinforcement Preforming by Experimental Approach

A digital twin for smart manufacturing of structural composites by liquid moulding

Numerical and experimental analyses of resin infusion manufacturing processes of composite materials

Numerical Modelling of the Thermoforming Behaviour of Thermoplastic Honeycomb Composite Sandwich Laminates

Automated Process Based on Functionalized Preform and Net-shape High Performance Resin Transfer Molding for High Volume Structural Applications

Design and manufacture of mould-free fibre-reinforced laminates with compound curvature

UNIMAT: An enhanced forming simulation model of prepreg woven fabrics, with application to process optimization for wrinkle mitigation

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet

Numerical Simulation of Edge Effect in Resin Transfer Molding for Plain-weave Fabric

Efficient numerical analysis of in-plane compression-induced defects in thick multi-ply woven textile preforms during double diaphragm forming

Fabric draping simulation in composites manufacturing. Part I: Description and applications

Validation of shape change predictions for stamp forming of carbon fiber thermoplastic composite laminates

Forming Simulation of Thick AFP Laminates and Comparison with Live CT Imaging

An accurate forming model for capturing the nonlinear material behaviour of multilayered binder-stabilised fabrics and predicting fibre wrinkling

A multifaceted approach using RVE homogenization methodology for identification of elastoplastic behavior of steel matrix composite: Application to deep-drawing process

Resin Infusion Between Double Flexible Tooling: Evaluation of Process Parameters

Research Progress in Numerical Simulation of Fiber Reinforced Thermosetting Resin Matrix Composites Molding Process

A multiscale consolidation model for press molding of hybrid textiles into complex geometries