Abstract:Composite materials which are reinforced with 3D warp interlock fabrics have outstanding mechanical properties such as higher delamination resistance, ballistic damage resistance and impact damage tolerance by means of their improved structural properties. Textile reinforcements are exposed to large deformations in the production stage of composite materials which have complex shape. Although good formability properties of 3D warp interlock fabrics in forming process were already proven by recent studies, further information is needed to elucidate forming behaviours of multi-layer fabrics which is produced with high stiffness yarns like carbon. In this study, 3D warp interlock carbon fabrics were produced on a prototype weaving loom and the same carbon yarn was used in two fabric directions with equal number of yarn densities. Fabrics were differentiated with regard to the presence of stuffer warp yarn, weave pattern and parameters of binding warp yarn which are angle and depth. Therefore, the effect of fabric architecture on the mechanical and formability properties of 3D warp interlock carbon fabrics could be clarified. Three different breaking behaviours of fabrics were detected and they were correlated with crimp percentages of yarn groups. In addition, the bending and shear deformations were analysed in view of parameters of fabric architectures. Two distinct forming behaviours of fabrics were determined according to the distribution of deformation areas on fabrics. Moreover, the optimal structure was identified for forming process considering the fabric architecture.

Analyse of Woven Reinforcement Preforming by Experimental Approach

Manufacture of thin composite structures by the RTM process: Numerical simulation of the shaping operation

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet

Evaluation of the mechanical behaviour of tufted preforms

Efficient numerical analysis of in-plane compression-induced defects in thick multi-ply woven textile preforms during double diaphragm forming

Deformation and Fracture Mechanisms of Automated Fiber Placement Pre-Preg Laminates under Out-of-plane Tensile Loading

Analysis of the bending behaviour of flax based reinforcements used in shape forming

Experimental Characterization Methods and Numerical Models of Woven Composite Preforms: A Review

A Lamination Model for Forming Simulation of Woven Fabric Reinforced Thermoplastic Prepregs

Study of the slippage and sliding mesoscopic defects during complex shape preforming of woven fabric

Meso-Macro Simulations of the Forming of 3D Non-Crimp Woven Fabrics

Investigation of the mechanical and forming behaviour of 3D warp interlock carbon woven fabrics for complex shape of composite material

Experiment Study of Thermoforming of Plain Woven Composite (Carbon/thermoplastics)

A Comprehensive Review Of Characterization And Simulation Methods For Thermo-Stamping Of 2d Woven Fabric Reinforced Thermoplastics

Textile composite double dome stamping simulation using a non-orthogonal constitutive model

Exploring deformability in 3D tufted composite reinforcements: Understanding bending behaviors in forming applications

An accurate forming model for capturing the nonlinear material behaviour of multilayered binder-stabilised fabrics and predicting fibre wrinkling

Different approaches for woven composite reinforcement forming simulation

Double diaphragm forming simulation for complex composite structures

Mesoscopic analyses of the draping of 3D woven composite reinforcements based on macroscopic simulations

A review of the formability of woven fabrics for composite materials