Abstract:Failure response of the modern high strength steel grades shows a diverse pattern compared to the conventional highly ductile steels. In automotive sheet forming applications of the high strength steels, fracture could be observed prior to necking or the post necking deformation is very limited. The differences in the underlying damage mechanisms contribute to the different ways of damage development and the interaction of damage with plastic localization and strain hardening creates various failure patterns. Therefore, it is critical to clearly identify the phase for damage initiation and understand the relation between plastic localization, damage and fracture, as these patterns significantly influence the safety assessment in the forming process of steels. Inverse modelling approaches are being used to bridge the gap between experiments and numerical simulations. However, this technique shows significant discrepancies when strain heterogeneity is experienced, especially since the determination of the material parameters is based on comparison on a global scale with force and elongation measurements. An iterative finite element model update (FEMU) procedure integrated with optical full field measurement technique was executed which extended the possibilities to identify the material ductile damage and fracture behavior on a local level with significantly higher accuracy. To identify the material plastic and damage behavior of the automotive dual phase steel (DP-K1000) under study, experiments are conducted on dog-bone, notched tensile, central hole and shear specimens at various strain rates. Full field deformation data was obtained by digital image correlation (DIC). A vigorous and general framework for the inverse identification of the strain hardening behavior up to fracture of the automotive high strength steel was studied. A hybrid damage mechanics model (extended Modified Bai-Wierzbicki) that combines a phenomenological criterion for damage initiation related to the microstructure degradation of materials and a continuum damage mechanics based damage evolution law for progressive damage accumulation till final fracture is employed using a VUMAT in the finite element (FE) scheme. To exclude the convergence (plastic instability) problems, a displacement driven finite element simulation was used while minimizing the discrepancy between the experimental and numerical surface strain fields and force values. A visual mapping procedure was adopted to realize identical reference frames and therefore identical peripheries for the specimen in DIC and FE model. This mapping includes a transformation and interpolation function from FE results to the DIC datum points. Successful identification of the material parameters was achieved based on a combined Gauss-Newton and Levenberg-Marquardt algorithm which require the evaluation of the gradient of the objective function to update the unknown parameters in an appropriate direction. The optimization problem of the inverse modelling in the current work was described by a cost function based on the least square norm of the differences of the surface strain fields. Overall cost function formulation is not dependent on the experimental or finite element meshes and includes rigid body motions. The residual was minimized at once for all the displacements by Gauss-Newton scheme in space-time, which is defined by spatial domain and temporal domain. The optimization of the constitutive parameters was directly achieved by minimizing this image residual in an iterative manner. The adopted methodology helped in determining macroscopic crack initiation instant and location from experiments. Local variables such as equivalent plastic strain, stress triaxiality and Lode angle parameter were evaluated from the critical element for the determination of the damage initiation locus which was then fitted by a non-linear least squares method with a trust-region algorithm in Matlab. The identified damage initiation locus and plastic localization phenomena served as an evaluation criteria for the formability of the dual phase automotive steel.

A multifaceted approach using RVE homogenization methodology for identification of elastoplastic behavior of steel matrix composite: Application to deep-drawing process

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Representative volume element (RVE) based FEA investigation on the plastic flow behaviour of friction-stir processed AA7075/Si3N4 composite under constrained deformation conditions

Integrating Experimental and Computational Analyses for Mechanical Characterization of Titanium Carbide/Aluminum Metal Matrix Composites

Homogenization and Localization of Ratcheting Behavior of Composite Materials and Structures with the Thermal Residual Stress Effect.

Numerical Study on Mechanical Properties of Discontinuously Reinforced Titanium Matrix Composite with Network Reinforcement Architecture

Predictive mechanical property and fracture behavior in high-carbon steel containing high-density carbides via artificial RVE modeling

Revealing plastic localization and ductile damage initiation features with integrated DIC and FEM

Representative Volume Element (RVE) Analysis for Mechanical Characterization of Fused Deposition Modeled Components

Thermo-mechanical properties prediction of Ni-reinforced Al2O3 composites using micro-mechanics based representative volume elements

A Unique Numerical Iterative Approach for Modelling Individual Phase Stress-Strain Curves in Dual Phase Steel

Microstructure-Based RVE Approach for Stretch-Bending of Dual-Phase Steels

An innovative computational framework for the analysis of complex mechanical behaviors of short fiber reinforced polymer composites

Periodic Boundary Condition and Its Numerical Implementation Algorithm for the Evaluation of Effective Mechanical Properties of the Composites with Complicated Micro-Structures

Numerical Evaluation on Mechanical Properties of Short-Fiber-reinforced Metal Matrix Composites: Two-step Mean-Field Homogenization Procedure

RVE-based virtual testing for investigation of the shear behaviour of cross-ply composites

3D Micromechanical Simulation of the Mechanical Behavior of an In-Situ Al3Ti/A356 Composite

Numerical studies of frictional responses when cutting hybrid CFRP/Ti composite

Determining the characteristics of representative volume elements in severely deformed aluminum-matrix composite

Prediction and Optimization of Mechanical Properties of Multi-phase Anisotropic TiB2 Reinforced Steel Composite Using Model

PVD coated dies in action: Exploring finite element analyses for sheet metal forming of high‐strength steel