Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Polymer-based composites (GFRP) are increasingly used in the mechanical industry due to their cost-profitability, durability, and good mechanical properties. In the present study, a metal carbide tool was employed to manufacture polyamide (PA66-GF30%) specimen in a dry environment. The impact of variations in cutting process parameters on the responses studied is investigated using two experimental techniques. The first is the OFAT approach. For the second technique (multifactorial), the effects of input parameters on technological parameters (Ra, Fz, MRR, and Pc) are quantified aided by the ANOVA method using an experimental design based on Taguchi's L9 (3 × 3) orthogonal matrix. Based on the RSM methodology, the results were processed statistically to propose prediction models for the different outputs. In addition, a single-objective optimization study of Taguchi's and a multi-objective optimization of the operating conditions using the classification method based on CoCoSo as well as the DF Approach according to two desired objectives were carried out. The first objective of this study concerns the minimization of (Ra, Fz, and Pc), and the second one considers the minimization of (Ra, Fz, and Pc) at the same time as maximizing (MRR). Finally, the surface roughness criteria (Ra and Sa) of PA66-GF30% were evaluated to study the effect of the feed (f) on the machined surface topography. The findings are of capital importance in that they provide the required and correct information about the working conditions of composite polymers. According to "OFAT" results, feed (f) is the predominant factor influencing roughness (Ra). Temperature in the cutting zone rises with increasing cutting conditions (Vc, f and ap). Variations in cutting conditions affect the morphology of the chip produced. The roughness criteria (Ra and Sa) results clearly show that the topography of the PA66-GF30% surface changes as (f) changes. Also, optimization of all performance parameters simultaneously indicates that the DFA offers the best combination of parameters: Vc = 187.50 m × min−1, f = 0.096 mm × rev−1, and ap = 0.866 mm, leading to the minimization of (Ra) and maximization of (MRR), with respective values of 1.24 μm and 15.614 cm3 × min−1. Furthermore, the CoCoSo method favors the minimization of (Fz and Pc) with values of 20.18 N and 69.285 W, respectively.

Performance analysis of composite and steel deep drawing tools combination

Performance evaluation of polymer-filled metal fused filament fabrication tooling for profile extrusion

Design for 3D Printed Tools: Mechanical Material Properties for Direct Polymer Additive Tooling

Extrusion-based additive manufacturing of forming and molding tools

Exploring Polymer-Based Additive Manufacturing for Cost-Effective Stamping Devices: A Feasibility Study with Finite Element Analysis

Laser Powder Bed Fusion of Inconel 718 Tools for Cold Deep Drawing Applications: Optimization of Printing and Post-Processing Parameters

Topology optimization of forming tools: pressure die in rotary draw bending process

Effect of process parameters on the deep drawing formability of aluminum and advanced high-strength steel square cups

A multifaceted approach using RVE homogenization methodology for identification of elastoplastic behavior of steel matrix composite: Application to deep-drawing process

PVD coated dies in action: Exploring finite element analyses for sheet metal forming of high‐strength steel

Process Design for Hybrid Sheet Metal Components

Finite Element Simulation of a Multistage Square Cup Drawing Process for Relatively Thin Sheet Metal through a Conical Die

Detailed experimental and numerical analysis of a cylindrical cup deep drawing: pros and cons of using solid-shell elements

Production tooling for polymer moulding using the RapidSteel process

The impact of process parameters and pin-to-shoulder ratio in FSW of polycarbonate: welding forces and critical quality indicators

Thermo-Mechanical Characterization of Metal–Polymer Friction Stir Composite Joints—A Full Factorial Design of Experiments

Understanding the Effect of Drilling Parameters on Hole Quality of Fiber-Reinforced Polymer Structures

FEM-Assisted Design of a Multi-Hole Pocket Die to Extrude U-Shaped Aluminum Profiles with Different Wall Thicknesses

Quantitative Evaluation of Tool Wear in Cold Stamping of Ultra-High-Strength Steel Sheets

Investigation on machining of GFRP through ANOVA, DFA, and CoCoSo method combined with Taguchi approach