Abstract:An experiment and numerical simulations were carried out to investigate the mechanism of the incipient and growth stages of a building fire. The building, constructed in the 1980s with wooden components, has one compartment and one opening. The average fire load density was 1495.3 MJ/m2, including the wooden columns, beams, furniture, etc. The evolution of indoor temperature, gas concentration, gas flow rate and burning behaviors were obtained and analyzed. To better understand the fire development process, we identified characteristic events, including pilot fire, incipient fire, pre-flashover fire spread, ceiling jet period, and flashover and spill plume. By defining dimensionless time (tau = ti/tflashover), it was found that the fire development process simulated by Fire Dynamic Simulator experienced the same characteristic events as the experiment. In this work, when flashover occurred, the neutral plane height decreased to about half the height of the opening, the velocity of hot smoke outflow was higher than 3 m/s, and the maximum thickness of the wood charred layer reached 1 cm. Two theoretical methods to estimate the heat release rate (HRR) in the fuel-controlled stage before flashover were proposed. The HRRs at the time of flashover with the two methods are at the same order of 5 MW, and the error between them was within 18.1%, which verifies the feasibility of the above methods to a certain extent. This study helps to learn the characteristics of early and growth stages of building fires with wooden components.

An Experimental Study on the Combustion Characteristics of Major Combustible Materials in Office Buildings

Experimental research on fire safety of lightweight bamboo frame buildings

An Experimental Study on the Effect of Fire Location on the Smoke Hazard in a Typical Building Structure Apparatus

Study on Combustion Characteristics of Ceiling Materials Using Cone Calorimeter

Experimental studies of the effect of burner location on the development of building fires

A Study on the Quantitative Fire Performance Evaluation Method of Building Finishing Materials with a Focus on Medical Facilities

Experimental and Numerical Investigations on Fire Development in a Timber-Based Compartment with Identification of Characteristic Events

An Experimental and Numerical Study on Fire Behaviors of Charring Materials Frequently Used in Buildings

Fire Risk Assessment in a High Racked Storage Warehouse

Experimental Simulation of CO2 and CO Generated by Burning Single Sofa in Full-scale Fire Test

Experimental investigations of the combustion efficiency for fire load calculations

A Study on the Improvement of Safety and Efficiency of Clean Rooms in Semiconductor Factories Through Real Fire Experiments

Research of Fire Compartment Method of Large Space Building

Thermodynamic and Kinetic Characteristics of Combustion of Discrete Polymethyl Methacrylate Plates with Different Spacings in Concave Building Facades

Experimental study on combustion characteristics of fire in data room

Effects of fuel distribution on thermal environment and fire hazard

Case Study of Performance-based Fire Design in Business Buildings

Full-Scale Experimental and Numerical Study on Combustion Behavior of Upholstered Sofa in enclosure

Influence of Compartment Fire Behavior at Ignition and Combustion Development Stages on the Operation of Fire Detectors

On the fire hazard identification in the performance-based fire protection design in large scale buildings

Coupling Thermal and Mechanical Effect on Structural Fire Safety