Abstract:This study addresses the combination of customized surface modification with the use of nanofluids, to infer on its potential to enhance pool-boiling heat transfer. Hydrophilic surfaces patterned with superhydrophobic regions were developed and used as surface interfaces with different nanofluids (water with gold, silver, aluminum and alumina nanoparticles), in order to evaluate the effect of the nature and concentration of the nanoparticles in bubble dynamics and consequently in heat transfer processes. The main qualitative and quantitative analysis was based on extensive post-processing of synchronized high-speed and thermographic images. To study the nucleation of a single bubble in pool boiling condition, a numerical model was also implemented. The results show an evident benefit of using biphilic patterns with well-established distances between the superhydrophobic regions. This can be observed in the resulting plot of the dissipated heat flux for a biphilic pattern with seven superhydrophobic spots, δ = 1/d and an imposed heat flux of 2132 w/m2. In this case, the dissipated heat flux is almost constant (except in the instant t* ≈ 0.9 when it reaches a peak of 2400 W/m2), whilst when using only a single superhydrophobic spot, where the heat flux dissipation reaches the maximum shortly after the detachment of the bubble, dropping continuously until a new necking phase starts. The biphilic patterns also allow a controlled bubble coalescence, which promotes fluid convection at the hydrophilic spacing between the superhydrophobic regions, which clearly contributes to cool down the surface. This effect is noticeable in the case of employing the Ag 1 wt% nanofluid, with an imposed heat flux of 2132 W/m2, where the coalescence of the drops promotes a surface cooling, identified by a temperature drop of 0.7 °C in the hydrophilic areas. Those areas have an average temperature of 101.8 °C, whilst the average temperature of the superhydrophobic spots at coalescence time is of 102.9 °C. For low concentrations as the ones used in this work, the effect of the nanofluids was observed to play a minor role. This can be observed on the slight discrepancy of the heat dissipation decay that occurred in the necking stage of the bubbles for nanofluids with the same kind of nanoparticles and different concentration. For the Au 0.1 wt% nanofluid, a heat dissipation decay of 350 W/m2 was reported, whilst for the Au 0.5 wt% nanofluid, the same decay was only of 280 W/m2. The results of the numerical model concerning velocity fields indicated a sudden acceleration at the bubble detachment, as can be qualitatively analyzed in the thermographic images obtained in this work. Additionally, the temperature fields of the analyzed region present the same tendency as the experimental results.

A new approach for predicting the pool boiling heat transfer coefficient of refrigerant R141b and its mixtures with surfactant and nanoparticles using experimental data

Study on Flow Boiling Heat Transfer Characteristics of R161/oil Mixture Inside Horizontal Micro-Fin Tube

Investigating the Thermal-Hydraulic Performance of New Refrigerant Mixtures Through Numerical Simulation of Minichannel and Microchannel Evaporators

Investigation on the Vapor–Liquid Equilibrium for the Ternary Mixture HFC-32 + HFC-125 + HFC-161 at Temperatures from 265.15 K to 303.15 K

Theoretical and experimental study on a novel mixture refrigerant of R161 +R227ea

Saturated Flow Boiling Heat Transfer of R1233zd(E) in Parallel Mini-Channels: Experimental Study and Flow-Pattern-based Prediction

Experimental study on the pool boiling heat transfer of R134a outside various enhanced tubes

Experimental determination of the role of roughness and wettability on pool-boiling heat transfer of refrigerant

Pool Boiling of Nanofluids on Biphilic Surfaces: An Experimental and Numerical Study

Pool Boiling Heat Transfer in Saturated R407C Using Reentrant Cavity Surfaces

Nucleate boiling heat transfer of R-134a and R-134a/POE lubricant mixtures on smooth tube

Experimental and Analytical Study on the Influence of Saturation Pressure and Surface Roughness on Pool Boiling CHF of HFE-7100

Prediction of effective heat transfer coefficients for vapour condensation inside horizontal tubes in stratified phase flow

Experimental investigation on flow boiling heat transfer of R290, R600a and their mixtures in a horizontal minichannel

Flow boiling heat transfer characteristics and correlation development of R290/R600a mixtures in an internally threaded tube{fr}Caractéristiques de transfert de chaleur par ébullition en écoulement et développement de corrélations pour les mélanges R290/R600a dans un tube fileté interne

Stability and thermodynamic property of TiO2/R141b nanorefrigerants by multi‐objective optimization

Experimental Study of Horizontal Flow Boiling Heat Transfer Coefficient and Pressure Drop of R134a from Subcooled Liquid Region to Superheated Vapor Region

Experimental investigation of heat transfer coefficient and frictional pressure drop in flow boiling of R513A: Comparative analysis of micro-fin and smooth tubes

Experimental Study on Nucleate Pool Boiling Heat Transfer Characteristics of R32+R1234yf Binary Mixtures

Numerical Study on Pool Boiling of Hybrid Nanofluids Using RPI Model

A New Heat Transfer Model for Flow Boiling of Refrigerants in Micro-Fin Tubes