Abstract:This paper presents a finite-element analysis (FEA) of the stress concentration factors (SCFs) of stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. The developed finite-element (FE) models include material non-linearities and are validated against corresponding experimental results available in the literature. The validated FE models were used to conduct an extensive parametric study comprising 324 FE models. The critical geometric parameters of the parametric study include: brace width-to-chord diameter ratio (beta(1) = b(1)/d(0)), brace-to-chord thickness ratio (tau = t(1)/t(0)), chord diameter-to-thickness ratio (2 gamma(1) = d(0)/t(0)), brace diameter-to-chord width ratio (beta(2) = d(1)/b(0)), chord width-to thickness ratio (2 gamma(2) = b(0)/t(0)), eccentricity (e), gap distance (g) of K-joints with gap, and overlap ratio (O-v) of overlapped K-joints. The results of the parametric study show that the effect of beta on the SCF varies for different types of K-joints. For all hybrid tubular K-joints, the values of SCFs increases with an increase in 2 gamma value. For gapped K-joints, the values of SCFs increases with an increase in e value. An attempt was made to compare the numerical results against the SCFs calculated in accordance with International Committee for the Development and Study of Tubular Structures (CIDECT) (2001) for both the stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. This comparison reveals how the design equations available in CIDECT (2001) for pure circular and square tubular joints are not suitable for predicting the SCFs of both the stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. Therefore, improved design equations are proposed in this paper for predicting accurately the SCFs of stainless steel hybrid tubular K-joints with square braces and circular chord, as well as circular braces and square chord.

Numerical study of the stress concentration factor in geometries of machine elements using Ansys® and Inventor®

Accuracy study of stress intensity factor solutions obtained by commercial FE software

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Comparative study on numerical simulation methods of stress concentration calculation and fatigue life prediction for welds

A Numerical Study and Proposed Design Rules for Stress Concentration Factors of Stainless Steel Hybrid Tubular K-joints

Finite Element Simulation and Experimental Verification of Internal Stress of Quenched AISI 4140 Cylinders

A noval stress integration algorithm in inverse analysis method of sheet metal stamping

Numerical Investigation and Design Rules for Stress Concentration Factors of Stainless-Steel Hybrid Tubular Joints

Finite Element Analysis and Design in Stainless Steel Sheet Forming and Its Experimental Comparison

Stress Concentration Factors for Non-Load-Carrying Welded Cruciform Joints Subjected to Tension, Bending, and Shear

Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams

Influence of the Geometric Parameters of Slotted Bar on Stress Concentration Factor at Prefabricated V-shaped Groove Bottom of the Bar Surface

Numerical Optimization of Stress Concentration in Composite Structures for Different Material Arrangement

Comparative study of torsional and bending stress in NiTi, graphene, and GUM metal endodontic files by finite element analysis

Stress and strain concentrations for the filleted shafts in tension

A Numerical Analysis of Stress Intensity Factors at Bifurcated Cracks

Exploring the stress concentration factor in additively manufactured materials: A machine learning perspective on surface notches and subsurface defects

Computing Stress Intensity Factors For Curvilinear Cracks

A Study of Stress Singularities Arising at the Multi-Material Interface in a V-notched Bending Plate

Study of residual stresses and distortions from the Ti6Al4V based thin-walled geometries built using LPBF process

Analysis of stress and strain concentration factors on notched plate beyond yield point of the material