Abstract:This paper presents a finite-element analysis (FEA) of the stress concentration factors (SCFs) of stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. The developed finite-element (FE) models include material non-linearities and are validated against corresponding experimental results available in the literature. The validated FE models were used to conduct an extensive parametric study comprising 324 FE models. The critical geometric parameters of the parametric study include: brace width-to-chord diameter ratio (beta(1) = b(1)/d(0)), brace-to-chord thickness ratio (tau = t(1)/t(0)), chord diameter-to-thickness ratio (2 gamma(1) = d(0)/t(0)), brace diameter-to-chord width ratio (beta(2) = d(1)/b(0)), chord width-to thickness ratio (2 gamma(2) = b(0)/t(0)), eccentricity (e), gap distance (g) of K-joints with gap, and overlap ratio (O-v) of overlapped K-joints. The results of the parametric study show that the effect of beta on the SCF varies for different types of K-joints. For all hybrid tubular K-joints, the values of SCFs increases with an increase in 2 gamma value. For gapped K-joints, the values of SCFs increases with an increase in e value. An attempt was made to compare the numerical results against the SCFs calculated in accordance with International Committee for the Development and Study of Tubular Structures (CIDECT) (2001) for both the stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. This comparison reveals how the design equations available in CIDECT (2001) for pure circular and square tubular joints are not suitable for predicting the SCFs of both the stainless steel hybrid tubular K-joints with square braces and circular chord and K-joints with circular braces and square chord. Therefore, improved design equations are proposed in this paper for predicting accurately the SCFs of stainless steel hybrid tubular K-joints with square braces and circular chord, as well as circular braces and square chord.

Stress Concentration Factors for Non-Load-Carrying Welded Cruciform Joints Subjected to Tension, Bending, and Shear

Experimental Evaluation of Stress Concentration Factor of Welded Steel Bridge T-Joints

Finite Element Analysis on Stress Concentration at Weld Toe of Butt-Welded Joints

Stress Concentration Factor Distribution Formulas for Three-Planar Tubular Y-joints under Axial Force

A method for stress concentration factor determination of welded steel bridge T-joints under moving load

Research on stress distributions around welds of three-planar tubular Y-joints under out-of-plane bending moment

Experiment investigations of stress concentration factor of concrete-filled tubular T joints

Calculation of Stress Intensity Factors of Surface Cracks at Weld Toe of Longitudinal Stiffener Joints in a Container

Study on stress concentration factor of concrete-filled steel tubular T-joints

Numerical Investigation and Design Rules for Stress Concentration Factors of Stainless-Steel Hybrid Tubular Joints

Prediction of Stress Concentration Factor Distribution for Multi-Planar Tubular DT-joints under Axial Loads

Stress Concentration Factors Due to Misalignment at Girth Welds in Bi-Layer Pipes

Finite element calculation and regression analysis on stress concentration factors of undermatching butt joints

Effect of Axial Misalignments in Fillet Welded Cruciform Joint Under Static Loading

The Influence of Corrosion Dissolution of the Metal Surface Layer on the Stress Concentration Factor in Butt-Welded Joins

Misalignment Effect on Stress Concentration of Thickness Mismatched Plate Structures

Fatigue Assessment of Steel Load-Carrying Cruciform Welded Joints by Means of Local Approaches

Parametric studies of stress intensity factors with varied steel frame connection geometry

A Comparative Study of Simplified SIF Calculations of Surface Cracks at Weld Toe

A Numerical Study and Proposed Design Rules for Stress Concentration Factors of Stainless Steel Hybrid Tubular K-joints

On the interaction of axial and bending loads in the weld root fatigue strength assessment of load-carrying cruciform joints