Abstract:Based on detailed three-dimensional finite element (3D FE) analyses, elastic notch-root fields in plates with different thicknesses and notch configurations subjected to uniaxial tension have been investigated. By comparing with the planar notch-root fields and crack-tip fields, the following characteristics of the 3D stress–strain fields near the notch front are revealed: (1) The plate thickness and notch configuration have obvious effects on the stress concentration factor (SCF) Kt, which is higher in finite thickness plates than in plane stress and plane strain cases. (2) The variation of the opening stress normalized by its value at the notch root with a distance x from the root normalized by the root radius ρ is insensitive to the notch configuration and the plate thickness and coincides well with the two-dimensional (2D) planar solution when x/ρ<0.75. (3) Strong 3D effects exist within a radius of about three-eighth the plate thickness from the notch root. Further away from the root, the through-thickness variation of field quantities decreases and, at the radial distance of approximately 1.25 times the plate thickness, all of the through-thickness changes disappear completely. At least for notches with opening angles less than 90°, these “2D–3D” transition distances and the variations of the out-of-plane constraint normalized by its value at the notch root with a distance x from the root normalized by the plate thickness B are essentially independent of the notch configuration and plate thickness. (4) In the 3D-effect zone, the gradient of the out-of-plane strain εzz in the thickness direction is significant near the free surface in thick plates. On the free surface, εzz can be 3.5 times as high as the value on the mid-plane. It is also found that the in-plane stress ratio in an arbitrary thickness plate coincides very well with the 2D solutions within a distance of about three-tenth of the root radius from the notch root.

Analysis of stress and strain concentration factors on notched plate beyond yield point of the material

A unified expression of elastic-plastic notch stress-strain calculation in bodies subjected to multiaxial cyclic loading

Further Investigation of Neuber's Rule and the Equivalent Strain Energy Density (ESED) Method

Three-dimensional elastic stress fields near notches in finite thickness plates

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)

Notch Stress Concentrations and Failure Characteristics in Laminates with Triple Parallel Notches

Stress Distribution Calculation of Notched Fatigue Specimens of TC21 Alloy

Assessment of notch fatigue and size effect using stress field intensity approach

Evaluation of the fatigue life of AISI 347 specimens with small notches based on local strain considerations

Stress-strain Calculation and Fatigue Life Assessment of V-shaped Notches of Turbine Disk Alloys

An enhanced stress field intensity approach for fatigue life assessment combining notch and size effect

An Improved Semi-Analytical Solution for Stress at Round-Tip Notches

Stress gradient effect in metal fatigue: Review and solutions

The concentration of stress and strain in finite thickness elastic plate containing a circular hole

Numerical and experimental analysis of the notch effect on fatigue behavior of polymethylmethacrylate metal based on strain energy density method and the extended finite element method

Recent advances on notch effects in metal fatigue: A review

Assessing notch fatigue performance of aluminium alloy AA2024-T4 after uni-axial and equi-biaxial tensile pre-straining: Experimental observations and predictive models

The Stress and Strain Concentrations of Out-of-plane Bending Plate Containing a Circular Hole

Three-dimensional elastic stress fields near notches in finite thickness bimaterial plates

Notch Fatigue Life Prediction Considering Nonproportionality of Local Loading Path under Multiaxial Cyclic Loading

A Time-Dependent Stress and Strain Estimation Method for Notched Components under Displacement-Controlled Condition