Abstract:Permanent deformation is a long-term irrecoverable depression accumulated in the wheel path when the flexible pavement is subjected to heavy loads at high temperature, which can be simulated using the vertically loaded wheel test (VLWT) in the laboratory. The objective of this study is to develop a new approach to analyze the vertically loaded wheel test results based on the elastic-viscoelastic correspondence principle. The energy-based pseudo variables are proposed to perform rutting evaluation of asphalt mixtures in the VLWT.Four types of styrene-butadienestyrene modified asphalt mixtures were prepared to conduct the undamaged compressive dynamic modulus test at different temperatures. Then the master curves of dynamic modulus for these mixtures were converted to get the relaxation modulus. The innovative VLWT for four types of two-layer structure with different asphalt mixture combinations were performed to investigate the rutting development. After that, a new mechanical-empirical rutting prediction model was introduced to predict the rutting development for each layer in the two-layer structure. The energy-based pseudo variables including pseudo strain, pseudo strain rate and dissipated pseudo strain energy (DPSE) were introduced to correlate with the rutting resistance.The results show that the developed mechanical-empirical rutting prediction model is proficient in capturing the rutting development of a two-layer structure of asphalt mixtures measured by a vertically loaded wheel tester. The rutting contributions of the top and bottom layers can be separated using this model. Compared with the total strain, the pseudo strain which removes the viscoelastic effect, is more accurate to evaluate the permanent deformation in a cyclic loading condition. The DPSE increases with the increase of loading cycles and rut depth. Two typical stages with an inflection point can be observed from the test results which indicate that the faster to reach the inflection point, the better rutting performance will be achieved.

Wander 2D: a flexible pavement design framework for autonomous and connected trucks

Development of Equivalent Stationary Dynamic Loads for Moving Vehicular Loads Using Artificial Intelligence-Based Finite Element Model Updating

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Autonomous trucks’ (ATs) lateral distribution and asphalt pavement performance

Simulation of autonomous truck for minimizing asphalt pavement distresses

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Evaluation of Flexible Pavement Deterioration Conditions Using Deflection Profiles under Moving Loads

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Assessment of the Effect of Different Loading Combinations Due to Truck Platooning and Autonomous Vehicles on the Performance of Asphalt Pavement

Effective lane width analysis for autonomous trucks

Dynamic responses of a saturated poroelastic half-space generated by a moving truck on the uneven pavement

Modelling of perpetual pavement performance subjected to varying European three-dimensional truck tire loading

A Weigh-in-Motion Characterization Algorithm for Smart Pavements Based on Conductive Cementitious Materials

Field evaluation and statistical analysis of the dynamic response of semi-rigid pavement under full-scale moving truck load

Finite-Element Simulation of Instrumented Asphalt Pavement Response under Moving Vehicular Load

A probabilistic approach to detect structural problems in flexible pavement sections at network level assessment

Determination of axle load spectra based on percentage of overloaded trucks for mechanistic-empirical pavement design

Dynamic analysis of semi-rigid asphalt pavement subjected to simulant dynamic loads

Incorporating truck speed effect on evaluation and design of flexible pavement systems

Airport pavement design considering areal load distribution

Tracking particle displacements in unbound aggregate layers of roadways