Abstract:Theoretical analysis and field tests on pile-base post grouting pile were carried out to study the generation and dissipation of residual stress and their effects on bearing behaviour of pile.Generation and dissipation of residual stress were observed for a long time by means of embedding earth pressure cells at pile tip and reinforcement stress gauges at pile shaft.The observation results show that during pile-base post grouting,high pressure grout produces a bidirectional force inside the confined spaces of pile tip,where the pile tip and pile tip soil are preloaded.Because of the bidirectional force,pile tip soil is preloaded and there will be negative friction along the bottom of pile shaft.However,within 24 hours after grouting,the permeation and pressure filtration of injected grouts will lead to the decrease of this bidirectional force and the dissipation of residual stress.24 hours later,the residual stress remains at a constant value.So before loading test,there are still negative friction along the bottom of pile shaft and the pile tip soil is preloaded.By preloading the pile tip soil and not changing the value of side friction resistance,the existence of residual stress can improve tip resistance;and thereby enhances the ultimate bearing capacity of post grouting pile as well.If the residual stress was neglected and the reading of reinforcement stress gauges was taken as zero reading assumption,the side friction resistance of pile will be overestimated and its tip resistance will be underestimated.

Calculation and analysis of bearing capacity reliability index of post-grouting pile

Design Method Reliability Assessment from an Extended Database of Axial Load Tests on Piles Driven in Sand

Assessment of design methods for axial bearing capacity of driven piles in clay

ANALYSIS OF RESIDUAL STRESS ON PILE-BASE POST GROUTING PILE

A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY

A Novel Method for Testing the Effect of Base Post-Grouting of Super-Long Piles

Vertical Bearing Capacity of Large-Diameter Bored Pile

A Simplified Nonlinear Calculation Method to Describe the Settlement of Pre-Bored Grouting Planted Nodular Piles

The Application Effect Analysis of Post Grouting under Bored Piles with Different Bearing Strata

Experimental study on vertical bearing performance of base post-grouted cast-in-place plies in soft soils

Research on Bearing Capacity of Post-grouting Super-long Bored Pile

Reliability Research on Bearing Capacity of Deep-Mixing Pile Composite Foundation

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Experimental Study on Post-Grouting Pile Vertical Bearing Performance Considering Different Grouting Methods and Parameters in Cohesive Soil

A test on base bearing capacity of static drill rooted nodular pile

Performance evaluation of post-grouting for bored piles installed in inhomogeneous gravel pebble stratum overlaid by deep and soft soil layers

ANALYSIS ON BEARING CAPACITY OF DIVING DRY-VIBRATION COMPACTION STONE PILES

Model Test And Numerical Analysis Of Geogrid-Reinforced Pile-Supported Foundation

Vertical bearing capacity of rock-socketed pile with enlargement at pile end

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters