Abstract:The non‐reactive CaO‐Al2O3 based mold flux system has been proposed to avoid the reaction problems during the casting process of advanced high strength steels, when conventional CaO‐SiO2 based mold flux system has been applied. However, new problems like low consumption and insufficient lubrication have been introduced during the industrials of CaO‐Al2O3 based mold fluxes, which is closely associated with its melt structure and crystallization behavior. This review paper summarized and discussed the studies on the melt structure and crystallization property of CaO‐Al2O3 based mold fluxes. The structural roles of Al2O3, B2O3, and SiO2 in CaO‐Al2O3 based mold flux system were quite complex, because the structural transformation occurred in aluminate network structure, like [AlO4]5‐ and [AlO5]7‐, and borate network structure, like [BO3]3‐ and [BO4]5‐ in the system. Besides, it has been suggested that the addition of basic metal oxides and fluorides would strengthen the stability of network structure, due to the charge compensation effect of Li+ and Ba2+, etc., and the strong electrostatic attraction between Al3+ and F‐. On the other hand, many Al‐bearing crystal phases with high melting point precipitated in the CaO‐Al2O3 based melt, which would improve the crystallization ability of slag and deteriorate its lubrication performance.This article is protected by copyright. All rights reserved.

Investigation on microstructure and its transformation mechanisms of B2O3-SiO2-Al2O3-CaO brazing flux system

Formation and Oxidation Behavior of Mo-Si-B Composite Coatings with B-rich Interlayer Prepared by Slurry Sintering Method

Elucidating the effect of Al2O3/SiO2 mass ratio upon SiO2-MnO-CaF2-Al2O3-based welding fluxes: Structural analysis and thermodynamic evaluation

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

[Raman Spectroscopic Study of the Structure of CaO-SiO2-Al2O3-Based Flux]

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Effect of Strontium and SmO on the Microstructure and Fracture Mode of AlSi-Mg2Si Brazing Filler Metal

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

Effect of B 2 O 3 on the Structure and Viscous Behavior of Ti-Bearing Blast Furnace Slags

An in-situ investigation on the microstructure and viscosity characteristic of mold flux during slag-metal reaction process

Understanding the Relationship Between Structure and Thermophysical Properties of CaO-SiO 2 -Mgo-al 2 O 3 Molten Slags

Effect of B2O3 on the Melting Temperature and Viscosity of CaO–SiO2–MgO–Al2O3–TiO2–Cr2O3 Slag

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

A structure-oriented elucidation for viscous flow of SiO2-MnO-Al2O3 fused submerged arc welding fluxes

Insight into the Viscosity–Structure Relationship of MnO–SiO2–MgO–Al2O3 Fused Submerged Arc Welding Flux

Unveiling the effect of MnO/SiO2 ratios on the viscosity and structure of mold fluxes for high-Mn cryogenic steels

Viscosity and structure of MgO–SiO2-based slag melt with varying B2O3 content

Influence of BaO and MgO on viscosity, crystalline phase, and structure of CaO–Al2O3–10%SiO2–20%CaF2-based system

A Review of the Melt Structure and Crystallization Behavior of Non‐Reactive Mold Flux for the Casting of Advanced High‐Strength Steels

Effect of CaO/SiO2 and Al2O3/SiO2 Mass Ratios on Structure and Viscosity of Mold Flux for Continuous Casting High‐Mn High‐Al Steel

Combined Effect of SiO2 and O2 on the Crystallization Behavior of Modified Ti-Bearing Blast Furnace Slag