Abstract:This article focuses on finding alternatives to CaF2‐containing submerged arc welding fluxes, without a compromise on the thermophysical properties. Three compositions in the CaO–MnO–SiO2–Al2O3 system with varying MnO content are identified as they seem to comply with the required melting behavior. This was estimated using the high‐temperature microscopy, DTA, simulations using FactSage (version8.3) and was found to be comparable with a commercial CaF2 containing welding flux. In addition, simulations using FactSage show the desirable dissolution of Si, Mn and weld pool O content (40–70 ppm) CaF2 has been a very common constituent in the fluxes used for welding of low‐carbon steel plates, owing to its strong ability to lower the liquidus temperature as well as viscosity of the molten flux. But the adverse impact of fluoride evaporation from molten slag on the health of operating personnel and the environment has prompted a worldwide effort to replace CaF2 with more benign constituents. Three compositions with varying MnO concentration in the CaO–MnO–SiO2–Al2O3 system, identified in the current work, have shown promise in terms of ability to control oxygen transfer and modify inclusion generation in the molten metal during the welding of low carbon low alloy steels. However, the melting behavior of a flux needs to be established before recommending its use for welding. Three compositions, with varying MnO concentration, are chosen in the current work. Aided by experimental measurements using high‐temperature microscopy, DTA and simulations using the commercially available thermodynamic package FactSage (version 8.3), this work aims to understand the melting characteristics of the developed fluxes. These characteristics seem to be comparable with a commercial CaF2‐containing welding flux, used as a reference for comparison. In addition, simulations using FactSage suggest that transfer of dissolved O, Si and Mn to the weld metal, while using these fluxes, would be benefitial to performance of the welded joint.

Insight into the Viscosity–Structure Relationship of MnO–SiO2–MgO–Al2O3 Fused Submerged Arc Welding Flux

A structure-oriented elucidation for viscous flow of SiO2-MnO-Al2O3 fused submerged arc welding fluxes

Elucidating the effect of Al2O3/SiO2 mass ratio upon SiO2-MnO-CaF2-Al2O3-based welding fluxes: Structural analysis and thermodynamic evaluation

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Melting Behavior of a CaO–SiO2–Al2O3 Flux with Varying MnO Concentration for Use in Fusion Welding of Low‐Carbon Steel

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

An in-situ investigation on the microstructure and viscosity characteristic of mold flux during slag-metal reaction process

Unveiling the effect of MnO/SiO2 ratios on the viscosity and structure of mold fluxes for high-Mn cryogenic steels

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Effect of Al2o3/Sio2 Ratio on the Viscosity and Structure of Slags

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Effect of CaO/SiO2 and Al2O3/SiO2 Mass Ratios on Structure and Viscosity of Mold Flux for Continuous Casting High‐Mn High‐Al Steel

Microstructure, MAO Performance, Interfacial Characteristics and Corrosion Behavior of FSW Joint of Al-Mg-Sc Alloy

Element Transfer Behavior for CaF2-Na2O-SiO2 Agglomerated Flux Subject in Submerged Arc Welding Process

[Raman Spectroscopic Study of the Structure of CaO-SiO2-Al2O3-Based Flux]

Structural and Viscous Insight into Impact of MoO3 on Molten Slags

Understanding the Relationship Between Structure and Thermophysical Properties of CaO-SiO 2 -Mgo-al 2 O 3 Molten Slags

Investigation on microstructure and its transformation mechanisms of B2O3-SiO2-Al2O3-CaO brazing flux system

Thermodynamic Nature of SiO2 and FeO in Flux O Potential Control Subject to Submerged Arc Welding Process

Effect of alkaline oxides on aluminate slag structure by first principles calculation

Influence of BaO and MgO on viscosity, crystalline phase, and structure of CaO–Al2O3–10%SiO2–20%CaF2-based system