Abstract:This article focuses on finding alternatives to CaF2‐containing submerged arc welding fluxes, without a compromise on the thermophysical properties. Three compositions in the CaO–MnO–SiO2–Al2O3 system with varying MnO content are identified as they seem to comply with the required melting behavior. This was estimated using the high‐temperature microscopy, DTA, simulations using FactSage (version8.3) and was found to be comparable with a commercial CaF2 containing welding flux. In addition, simulations using FactSage show the desirable dissolution of Si, Mn and weld pool O content (40–70 ppm) CaF2 has been a very common constituent in the fluxes used for welding of low‐carbon steel plates, owing to its strong ability to lower the liquidus temperature as well as viscosity of the molten flux. But the adverse impact of fluoride evaporation from molten slag on the health of operating personnel and the environment has prompted a worldwide effort to replace CaF2 with more benign constituents. Three compositions with varying MnO concentration in the CaO–MnO–SiO2–Al2O3 system, identified in the current work, have shown promise in terms of ability to control oxygen transfer and modify inclusion generation in the molten metal during the welding of low carbon low alloy steels. However, the melting behavior of a flux needs to be established before recommending its use for welding. Three compositions, with varying MnO concentration, are chosen in the current work. Aided by experimental measurements using high‐temperature microscopy, DTA and simulations using the commercially available thermodynamic package FactSage (version 8.3), this work aims to understand the melting characteristics of the developed fluxes. These characteristics seem to be comparable with a commercial CaF2‐containing welding flux, used as a reference for comparison. In addition, simulations using FactSage suggest that transfer of dissolved O, Si and Mn to the weld metal, while using these fluxes, would be benefitial to performance of the welded joint.

Elucidating the effect of Al2O3/SiO2 mass ratio upon SiO2-MnO-CaF2-Al2O3-based welding fluxes: Structural analysis and thermodynamic evaluation

A structure-oriented elucidation for viscous flow of SiO2-MnO-Al2O3 fused submerged arc welding fluxes

Insight into the Viscosity–Structure Relationship of MnO–SiO2–MgO–Al2O3 Fused Submerged Arc Welding Flux

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Melting Behavior of a CaO–SiO2–Al2O3 Flux with Varying MnO Concentration for Use in Fusion Welding of Low‐Carbon Steel

[Raman Spectroscopic Study of the Structure of CaO-SiO2-Al2O3-Based Flux]

Element Transfer Behavior for CaF2-Na2O-SiO2 Agglomerated Flux Subject in Submerged Arc Welding Process

Unveiling the effect of MnO/SiO2 ratios on the viscosity and structure of mold fluxes for high-Mn cryogenic steels

Investigation on microstructure and its transformation mechanisms of B2O3-SiO2-Al2O3-CaO brazing flux system

In Situ Modification of CaF2-SiO2-Al2O3-MgO Flux Applied in the Aluminium-Assisted Transfer of Titanium in the Submerged Arc Welding of Carbon Steel: Process Mineralogy and Thermochemical Analysis

Probing Element Transfer Behavior during the Submerged Arc Welding Process for CaF2-SiO2-Na2O-Cr2O3 Agglomerated Fluxes: A Thermodynamic Approach

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

Effect of CaO/SiO2 and Al2O3/SiO2 Mass Ratios on Structure and Viscosity of Mold Flux for Continuous Casting High‐Mn High‐Al Steel

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Advancing Methodologies for Elemental Transfer Quantification in The Submerged Arc Welding Process: A Case Study of CaO-SiO2-MnO Flux

Thermodynamic Nature of SiO2 and FeO in Flux O Potential Control Subject to Submerged Arc Welding Process

Effect of Al2o3/Sio2 Ratio on the Viscosity and Structure of Slags

Influence of SiO2 Activating Flux on the Performance of Low Power Laser Welding of Stainless Steel

Study of Thermodynamic for Low-Reactive CaO-BaO-Al2O3-SiO2-CaF2-Li2O Mold Flux Based on the Model of Ion and Molecular Coexistence Theory

An in-situ investigation on the microstructure and viscosity characteristic of mold flux during slag-metal reaction process