Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Depth profiles of aluminum component in sequential infiltration synthesis-treated electron beam resist films analyzed by time-of-flight secondary ion mass spectrometry

Surface Analysis of Photolithographic Patterns Using Tof-Sims and Pca

Trimethylaluminum Diffusion in PMMA Thin Films during Sequential Infiltration Synthesis: In Situ Dynamic Spectroscopic Ellipsometric Investigation

FIB’n’SIMS – Advanced Depth Analysis on Hybrid Organic-Inorganic Nanomaterials

Mechanical Behavior of Hybrid Thin Films Fabricated by Sequential Infiltration Synthesis in Water-Rich Environment

Effect of Metal Oxide Deposition on the Sensitivity and Resolution of E-Beam Photoresist

Ozone-based sequential infiltration synthesis of Al2O3 nanostructures in symmetric block copolymer

On the differences in trimethylaluminum infiltration into PMMA and PLA polymers for sequential infiltration synthesis: insights from experiment and first principles simulations

High Sensitivity of Fluorine Gas-Assisted FIB-TOF-SIMS for Chemical Characterization of Buried Sublayers in Thin Films

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

Investigation of plasma electrolytic oxidation coating formed on two Al–Si–Mg alloys via advanced X-ray computed tomography

Effect of the Density of Reactive Sites in P(S-r-MMA) Film During Al2O3 Growth by Sequential Infiltration Synthesis

Study on resist performance of inorganic-organic resist materials for EUV and EB lithography

Depth Profiling of Si Oxidation States in Si-Implanted SiO<sub>2</sub> Films by X-Ray Photoelectron Spectroscopy

Nanopatterning of metal-coated silicon surfaces via ion beam irradiation: Real time x-ray studies reveal the effect of silicide bonding

Interface Analysis of Inorganic Films on Polyimide with Atomic Oxygen Exposure

Investigation on organic contamination on bond-pad of semiconductor micro-chip by TOF-SIMS

Depth resolution optimized sputter depth profiling of a polycrystalline Al layer

In Situ Time-of-Flight Mass Spectrometry of Ionic Fragments Induced by Focused Electron Beam Irradiation: Investigation of Electron Driven Surface Chemistry inside an SEM under High Vacuum

Probing Polymer Deformation Profiles at Varying Depths in Nanoimprint Lithography

Spectroscopic Depth Profilometry of Organic Thin Films Upon Inductively Coupled Plasma Etching.