Abstract:Purpose Fused deposition modeling (FDM) nowadays offers promising future applications for fabricating not only thermoplastic-based polymers but also composite PLA/Metal alloy materials, this capability bridges the need for metallic components in complex manufacturing processes. The research is to explore the manufacturability of multi-metal parts by printing green bodies of PLA/multi-metal objects, carrying these objects to the debinding process and varying the sintering parameters. Design/methodology/approach Three different sample types of SS316L part, Inconel 718 part and bimetallic composite of SS316L/IN718 were effectively printed. After the debinding process, the printed parts (green bodies), were isothermally sintered in non-vacuum chamber to investigate the fusion behavior at four different temperatures in the range of 1270 °C−1530 °C for 12 h and slowly cooled in the furnace. All samples was assessed including geometrical assessment to measure the shrinkage, characterization (XRD) to identify the crystallinity of the compound and microstructural evolution (Optical microscopy and SEM) to explore the porosity and morphology on the surface. The hardness of each sample types was measured and compared. The sintering parameter was optimized according to the microstructural evaluation on the interface of SS316L/IN718 composite. Findings The investigation indicated that the de-binding of all the samples was effectively succeeded through less weight until 16% when the PLA of green bodies was successfully evaporated. The morphology result shows evidence of an effective sintering process to have the grain boundaries in all samples, while multi-metal parts clearly displayed the interface. Furthermore, the result of XRD shows the tendency of lower crystallinity in SS316L parts, whilst IN718 has a high crystallinity. The optimal sintering temperature for SS316L/IN718 parts is 1500 °C. The hardness test concludes that the higher sintering temperature gives a higher hardness result. Originality/value This study highlights the successful sintering of a bimetallic stainless steel 316 L/Inconel 718 composite, fabricated via dual-nozzle fused deposition modeling, in a non-vacuum environment at 1500 °C. The resulting material displayed maximum hardness values of 872 HV for SS316L and 755.5 HV for IN718, with both materials exhibiting excellent fusion without any cracks.

Design of a debinding process for polymetallic material green parts fabricated via metal paste injection 3D printing with dual nozzles

Thermal debinding mass transfer mechanism and dynamics of copper green parts fabricated by an innovative 3D printing method

Photopolymerization of Stainless Steel 420 Metal Suspension: Printing System and Process Development of Additive Manufacturing Technology toward High-Volume Production

A Facile and Sustainable Integrated Fabrication Strategy for Multi-Performance 316l Stainless Steel

Process Parameter Optimization of Extrusion-Based 3D Metal Printing Utilizing PW–LDPE–SA Binder System

Preparation of optimum degreasing–sintering process for metal–polymer blending low temperature 3D printing

Printability disparities in heterogeneous material combinations via laser directed energy deposition: a comparative study

Creating Metal Parts by Fused Deposition Modeling and Sintering

PRODUCED THREE-DIMENSIONAL METAL PARTS BY ELECTRON BEAM SELECTIVE MELTING

Metal Direct Prototyping by Using Hybrid Plasma Deposition and Milling

Sustainable metal-infused polymer feedstock compatible with low-cost metal sinter-based 3D printing

Sintering parameter investigation for bimetallic stainless steel 316L/inconel 718 composite printed by dual-nozzle fused deposition modeling

Dual-Material Electron Beam Selective Melting: Hardware Development and Validation Studies

On the possibilities of merging additive manufacturing and powder injection molding in the production of metal parts

Optimal Process Parameters for FDM‐Based 3D Printing of Metal‐Polymer Mixtures with Low‐Temperature Powder Feeding

A design strategy for removing the debinding and sintering gas in additive manufactured samples of a bronze/polylactic acid filament

Paste-based 3D printing of metallic materials: effect of binders and precursor sizes

Accelerating process development for 3D printing of new metal alloys

Sacrificial Powder Pressure Control for Infiltration of Microscale Binder Jet Printed Metal Parts

Study on sintering mechanism for extrusion-based additive manufacturing of stainless steel through molecular dynamics simulation

Design, Testing, and Application of an Open-Source Powder Material Extrusion 3D Printer