Abstract:Electron beam powder bed fusion (EB-PBF) is a key metal additive manufacturing (AM) technology known for its high energy absorption and low heat stress. However, the high surface roughness of EB-PBF parts has limited its broader application. To address this issue, this paper proposes a dashed-scan contouring strategy to obtain lower surface roughness in EB-PBF. This strategy involves blending the melts the contour in the form of segmented staggered scans and employing high-frequency jumping of the electron beam (EB) to melt multiple positions synchronously. A comprehensive analysis, combining experimental investigations and multi-physical simulations, elucidates the intrinsic connection between control processes and melt pool stability. Results show that by controlling the length-to-width ratio of the melt pool, regulating overlap distances between melt pools, and fine-tuning cooling times, balling phenomena and Plateau-Rayleigh instabilities can be suppressed. Additionally, these measures effectively mitigate irregularities in track formation when compared to the traditional process. Experimental validation demonstrates the efficacy of the approach, achieving reduced surface roughness (Ra) of thin-walled Ti-6Al-4V parts from over 25 μm to below 12.6 μm, while enhancing dimensional accuracy and reducing melt anomalies at corners. The proposed dashed-scan contouring strategy opens new avenues for AM of highly reliable and intricate structures, such as lattice sandwich structures, thin walls, and internal flow passages.

PRODUCED THREE-DIMENSIONAL METAL PARTS BY ELECTRON BEAM SELECTIVE MELTING

Direct Metal Part Forming of 316L Stainless Steel Powder by Electron Beam Selective Melting

Technology Research of Direct Metal Forming Based on Electron Beam

Electron Beam Selective Melting of 316L Stainless Steel Powder

Study on the Fabrication Process of 316L Stainless Steel via Electron Beam Selective Melting

Dual-Material Electron Beam Selective Melting: Hardware Development and Validation Studies

Effect of Electron Beam Selective Melting on the Microstructure and Mechanical Properties of Ti Alloy

Scanning Method of Filling Lines in Electron Beam Selective Melting

Mechanism, Microstructure and Performance of Novel Electron Beam Freeform Fabrication Compared with Conventional Method

Powder Preparation by Vacuum Atomization and 3D Printing Forming Performance of 316 Stainless Steel

Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder

Material extrusion-based fabrication of 316L stainless steel: analysis of debinding and sintering, mechanical properties, and corrosion resistance

Study on performance optimization of 316L stainless steel parts by High-Efficiency Selective Laser Melting

Enhanced mechanical properties and formability of 316L stainless steel materials 3D-printed using selective laser melting

Microstructure and Mechanical Properties of Ti-6Al-4V Fabricated by Electron Beam Melting

The Development of Electron Beam and Laser Hybrid Selective Melting Equipment

Effects of scanning parameters on material deposition during Electron Beam Selective Melting of Ti-6Al-4V powder

Creating Metal Parts by Fused Deposition Modeling and Sintering

3D Modeling and Forming Mechanism of Ti Metallic Powder Via Laser Rapid Prototyping

Experimental Researches on Rapid Forming Full Compacted Metal Parts by Selective Laser Melting

A Surface Quality Optimization Strategy Based on a Dedicated Melt-Pool Control Via the Dashed-Scan Contouring Technique in Electron Beam Powder Bed Fusion