Abstract:Abstract With the development of integrated circuit technology, especially after entering the sub-micron process, the reduction of critical dimensions and the realization of high-density devices, the flatness between integrated circuit material layers is becoming more and more critical. Because conventional mechanical polishing methods inevitably produce scratches of the same size as the device in metal or even dielectric layers, resulting in depth of field and focus problems in lithography. The first planarization technique to achieve application is spin on glass (SOG) technology. However, this technology will not only introduce new material layers, but will also fail to achieve the global flattening required by VLSI and ULSI technologies. Moreover, the process instability and uniformity during spin coating do not meet the high flatness requirements of the wafer surface. Also, while some techniques such as reverse etching and glass reflow can achieve submicron level regional planarization. After the critical dimension reaches 0.35 microns (sub-micron process), the above methods cannot meet the requirements of lithography and interconnect fabrication. In the 1980s, IBM first introduced the chemical mechanical polishing (CMP) technology used to manufacture precision optical instruments into its DRAM manufacturing [1]. With the development of technology nodes and critical dimensions, CMP technology has been widely used in the Front End Of Line (FEOL) and Back End Of Line (BEOL) processes [2]. Since the invention of chemical mechanical polishing, scientists have not stopped studying its internal mechanism. From the earliest Preston Formula (1927) to today’s wafer scale, chip scale, polishing pad contact, polishing pad - abrasive - wafer contact and material removal models, there are five different scale models from macro to the micro [3]. Many research methods, such as contact mechanics, multiphase flow kinetics, chemical reaction kinetics, molecular dynamics, etc., have been applied to explain the principles of chemical mechanical polishing to establish models. This paper mainly introduces and summarizes the different models of chemical mechanical polishing technology. The various application scenarios and advantages and dis-advantages of the model are discussed, and the development of modeling technology is introduced.

Novel functionally graded and composite-structured lapping and polishing plate for better uniformity of material removal

Structure and Properties of Particles/rubber Composites Applied on Functionally Graded Lapping and Polishing Plate

Contact stress prediction model of double‐layer elastomer with functionally graded and composite structure

A novel polishing process with rigid-flexible composite structure plate for sapphire wafer polishing

Grinding and lapping induced surface integrity of silicon wafers and its effect on chemical mechanical polishing

A Study on the Material Removal Characteristics and Damage Mechanism of Lapping for Pressureless Sintered Silicon Carbide (SSiC) Microlens Cavity

Novel Abrasive-Impregnated Pads and Diamond Plates for the Grinding and Lapping of Single-Crystal Silicon Carbide Wafers

Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing

A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: Laser-induced ablation-assisted grinding

A novel process of chemical mechanical polishing for FV520B steel

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Single crystal silicon wafer polishing by pretreating pad adsorbing SiO2 grains and abrasive-free slurries

Polymer coated γ-aminopropyltriethoxysilane-modified α-alumina non-spherical nanocomposite abrasives and their chemical mechanical polishing behavior on glass-ceramic substrate

Novel green chemical mechanical polishing of fused silica through designing synergistic CeO 2 /h-BN abrasives with lubricity

Chemical mechanical polishing of hard disk substrate with α-alumina-g-polystyrene sulfonic acid composite abrasive

Theoretical and experimental investigation on surface generation and subsurface damage in fixed abrasive lapping of optical glass

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

Achieving Ultralow Surface Roughness and High Material Removal Rate in Fused Silica Via a Novel Acid SiO2 Slurry and Its Chemical-Mechanical Polishing Mechanism

Design of a novel fixed abrasive petal-shaped lapping tool and material removal uniformity experiments on K9 glass

Review on modeling and application of chemical mechanical polishing