Abstract:With the rapid progress of science and technology, many applications of hard and brittle materials require advanced and suitable machining-techniques. One technique in particular, ultrasonic vibration-assisted polishing (UVAP), has been studied intensively by researchers worldwide. These studies indicate that UVAP has the capability to improve the surface quality as well as the machining efficiency. However, few studies focus on the deterministic material-removal of UVAP. The difference between generated and theoretical surface profiles determines the surface accuracy. Therefore, this paper focuses on predicting the generated local surface profile and providing a theoretical basis to reduce this error by controlling the polishing parameters. In addition to the axial ultrasonic vibration of polishing tool, ultrasonic atomization was adopted to provide uniformly distributed polishing slurry. To ensure sufficient surface-accuracy, it is necessary to predict the generated surface profile for a fixed spot as a basis research. This means, to enable accurate predictions the following improvements are realized: (i) A novel model for the elastic spherical contact-deformation of the polishing tool is used to calculate both the polishing force and contact radius. It takes into account the nonlinear elasticity of the polishing tool and the lateral extension of the contact area, which makes it more consistent with the actual deformation. (ii) A novel model for the material-removal distribution function for UVAP is proposed, based on the Preston equation. It considers the periodic changes of polishing force and contact radius caused by ultrasonic vibration. (iii) A series of fixed-spot polishing experiments on BK7 glass are carried out to verify the proposed models. The results show that the Preston coefficient is affected by axial ultrasonic amplitude, and large ultrasonic amplitude improves the polishing ability. In addition, the generated local surface profile, the maximum contact radius, as well as the material-removal depth and material-removal rate (MRR) can be predicted well. The new models not only provide a possibility to realize deterministic material removal but also enables in-depth-understanding of UVAP. It also represents a basic theoretical foundation for future, flat or free-form surface-polishing.

Design of a novel fixed abrasive petal-shaped lapping tool and material removal uniformity experiments on K9 glass

Influences of polishing tool's shape on surface roughness in magneto-rheological finishing

Influence of the Shape of Polishing Tools on the Surface Roughness in Magneto-rheological Finishing

Ultraprecision finishing process integrated ELID grinding and MRF for BK glass

Theoretical and experimental investigation on surface generation and subsurface damage in fixed abrasive lapping of optical glass

Material removal profile prediction and experimental validation for obliquely axial ultrasonic vibration-assisted polishing of K9 optical glass

Theoretical and experimental investigation on material removal mechanism in dual-rotation polishing of fused silica glass

Predictive modeling and experimental study of polishing force for ultrasonic vibration-assisted polishing of K9 optical glass

Investigation of Material Removal Distributions and Surface Morphology Evolution in Non-Contact Ultrasonic Abrasive Machining (NUAM) of BK7 Optical Glasses

Novel functionally graded and composite-structured lapping and polishing plate for better uniformity of material removal

Investigation on surface evolution and subsurface damage in abrasive lapping of hard and brittle materials using a novel fixed lapping tool

Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces

Trajectory uniformity in fixed abrasive plane lapping of BK7 glass

Consistency of Surface Quality on Batch Polishing of Soft-brittle Optical Lens

Modeling and prediction of generated local surface profile for ultrasonic vibration-assisted polishing of optical glass BK7

A Study on the Material Removal Characteristics and Damage Mechanism of Lapping for Pressureless Sintered Silicon Carbide (SSiC) Microlens Cavity

Lapping performance of mixed-size agglomerated diamond abrasives in fixed abrasives pads

Curvature effect-based modeling and experimentation of the material removal in polishing optical surfaces using a flexible ball-end tool

Surface integrity and material removal mechanism in fluid jet polishing of optical glass

Experimental Investigation of Rotary Ultrasonic Face Milling of K9 Glass

Modeling and analysis for material removal and surface roughness in fluid jet polishing of optical glass