Abstract:According to the recent development trend of the smart farm industry, solid oxide fuel cells are emerging as a sustainable power source due to their high fuel efficiency and fuel flexibility which includes carbon fuels such as carbon monoxide. This study conducted a series of experiments to secure an operation strategy for a solid oxide fuel cell operating at the intermediate temperature of 650~800C. Although it is known that when a fuel cell is operated using carbon-based fuel at an intermediate temperature under 800C, fatal degradation occurs due to carbon coking, widely used commercial fuel cell stacks were manufactured not to exceed that temperature. To simulate a commercial fuel cell stack, the experiment was conducted in the commercial operating temperature range, and nickel-yttria stabilized zirconia was used as anode material. Additionally, ceria-based anode material was applied, and compared its single-cell performance with that of the yttria-based anode material. Carbon monoxide-hydrogen mixed fuel, which can be produced through torrefaction and fuelization from agricultural by-products, was supplied. To this end, a YSZ-based electrolyte-supported cell using Ni-YSZ/Ni-GDC and LSCF-GDC as anode and cathode materials, respectively, was fabricated by the sputtering method. The cell performance and degradation phenomenon were measured under the two temperature ranges and two fuel supply conditions. For structural analysis, FE-SEM and FIB-SEM methods were conducted, and techniques such as the i-V-P curve, EIS, and DRT were used for their electrochemical analysis. The relationship between the nano-scaled structural change caused by the carbon coking phenomenon and the cell performance was derived. Especially, EDS mapping and XPS analyses were conducted to quantify the carbon coking phenomenon. Through this, the degradation mechanism mainly caused by carbon coking was analyzed when syngas was used as a fuel. The optimal operating condition for durable fuel cell performance was confirmed for the stack-sized operation in the smart farm industry.

Mechanisms of performance degradation induced by thermal cycling in solid oxide fuel cell stacks with flat-tube anode-supported cells based on double-sided cathodes

Degradation Mechanisms of Solid Oxide Fuel Cells under Various Thermal Cycling Conditions

Solid Oxide Electrolysis Cell under Real Fluctuating Power Supply with a Focus on Thermal Stress Analysis

Degradation behavior under alternating constant-current/constant-voltage discharge for flat-tube solid oxide fuel cells inside stack

Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack

Degradation of flat-tube solid oxide electrolytic stack for co-electrolysis of H 2 O and CO 2 under pulsed current

Degradation analysis of commercial interconnect materials for solid oxide fuel cells in stacks operated up to 18000 hours

Quantifying the performance evolution of solid oxide fuel cells during initial aging process

Degradation of Solid Oxide Fuel Cell Using Thin Film Electrodes Fueled By Carbon Monoxide-Hydrogen Syngas

Assessing performance degradation induced by thermal cycling in solid oxide cells

Performance and degradation of an SOEC stack with different cell components

Performance degradation and process engineering of the 10 kW proton exchange membrane fuel cell stack

Durability of solid oxide electrolysis stack under dynamic load cycling for syngas production

Multiscale modeling of degradation of full solid oxide fuel cell stacks

Electrochemical Analysis of an Electrolyte-Supported Solid Oxide Cell-Based MK35x Stack during Long-Term Electrolysis Operation

Long‐Term Behavior of a Solid Oxide Electrolyzer (SOEC) Stack▴

Thermal Stress in Full-Size Solid Oxide Fuel Cell Stacks by Multi-Physics Modeling

Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells

Initial-Stage Performance Evolution of Solid Oxide Fuel Cells Based on Polarization Analysis

Long-Term Operation and Post Analysis of a Stack with Methane Fuel

Analysis of Electrochemical Degradation Phenomena of SOC Stacks Operated in Reversible SOFC/SOEC Cycling Mode