Abstract:A dynamic pressure swing adsorption simulation model has been developed that caters for a detailed transport mechanism of nitrogen and methane in the micropores of both ETS-4 and CMS adsorbents. Five adsorbents, namely, barium-exchanged ETS-4 dehydrated at 400 °C (Ba400), strontium-exchanged ETS-4 dehydrated at 190 °C (Sr190) and 270 °C (Sr270), Bergbau–Forchung carbon molecular sieve (BF CMS), and Takeda carbon molecular sieve (Takeda CMS), have been selected for the simulation study in order to compare their performances for upgrading natural gas. The transport mechanisms of gases in CMS and ETS-4 adsorbents are different. In pressure swing adsorption (PSA) simulation, the binary equilibrium and kinetics are represented by the models that have recently been experimentally verified for methane–nitrogen mixture in Ba400, Sr190, and Sr270 adsorbents [Majumdar, B.; Bhadra, S. J.; Marathe, R. P.; Farooq, S. Ind. Eng. Chem. Res. 2011, 50, 3021]. The multisite Langmuir isotherm is used for adsorption equilibrium. The kinetic model takes into account diffusion in both macropores and micropores and the concentration dependence of micropore diffusivity according to the chemical potential gradient as the driving force with constant limiting micropore diffusivity. It also has the provision to allow for the dual transport resistance and strong concentration dependence of the thermodynamically corrected micropore transport coefficients in CMS according to the published results [Huang, Q.; Farooq, S.; Karimi, I. A. Langmuir 2003, 19, 5722]. Operating conditions have been identified that favor high recovery while simultaneously meeting the required pipeline specification for methane purity. The performance of the best sample for methane–nitrogen separation by PSA found from the simulation study, Ba400, is compared with published performances of ETS-4 and clinoptilolite. It has been found that, in addition to meeting pipeline specification, Ba400 also gives higher recovery, thus making this adsorbent a promising candidate for further exploration.

Industrial-Scale Benzene Adsorption: Assessment of a Baseline One-Dimensional Temperature Swing Model against Online Industrial Data

Mathematical Modelling of Expanded Bed Adsorption – a Perspective on in Silico Process Design

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Adsorption characteristics of the carbonaceous adsorbents for organic compounds in a model exhaust gas from thermal treatment processing

Modeling of Vacuum Temperature Swing Adsorption for Direct Air Capture Using Aspen Adsorption

Modeling Of Elemental Mercury Control By Sorbents From Simulated Flue Gases

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Modeling of multi-temperature Type I and II benzene/ammonia adsorption isotherms: Dual LF model and linearized DR model

Dynamic Model Validation and Simulation of Acetone-Toluene and Benzene-Toluene Systems for Industrial Volatile Organic Compound (VOC) Abatement

Performance assessment of the MOF adsorbent MIL-101 for removal of gaseous benzene and toluene: kinetic column modeling and simulation studies of fixed-bed adsorption

Experimental evaluation of benzene adsorption in the gas phase using activated carbon from waste biomass

Adsorption Modeling Based on Classical Density Functional Theory and PC-SAFT: Temperature Extrapolation and Fluid Transfer

Adsorption Characteristics Of Benzene-Chlorobenzene Vapor On Hypercrosslinked Polystyrene Adsorbent And A Pilot-Scale Application Study

The potential utility of HKUST-1 for adsorptive removal of benzene vapor from gaseous streams using a denuder versus a packed-bed adsorption system

Research on Oil and Gas Adsorption Optimization Based on CFD Modeling and Process Simulation

On the capture of ultralow-level benzene in indoor environments: Experiments, modeling and molecular simulation

Thermo Chemical Equilibrium Modelling of a Biomass Gasifying Process Using ASPEN PLUS

Analytical model and experimental investigation of the adsorption thermodynamics of coalbed methane

Adsorption equilibrium of activated carbon amid fluctuating benzene concentration in indoor environments

Separation of Methane–Nitrogen Mixture by Pressure Swing Adsorption for Natural Gas Upgrading

Modeling of a Rotary Adsorber for Continuous Capture of Indoor Carbon Dioxide