Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Study on the Influence of Temperature on Tire Cornering Stiffness and Aligning Stiffness

Study on the Dynamic Characteristics of Automobile Tire

Research on simplified tire finite element modeling and simulation method

Prediction Of Tire Cornering Behavior With An Enhanced Friction Model

Finite element analysis for tire cornering characteristics with tread pattern effects

EXPERIUMENT AND FINITE ELEMENT ANALYSIS OF STEADY-STATE TEMPERATURE DISTRIBUTION IN ROLLING TIRE UNDER DIFFERENT LOADS AND INITIAL INFLATION PRESSURES

Study on the mechanism of belt cord angle contribution to tire cornering power

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

THEORETICAL MODEL OF STEADY STATE TIRE CORNERING PROPERTIES WITH THE COMPLEX DEFORMATION OF CARCASS UNDER CONSIDERATION

Finding Optimum Ackermann Geometry for a Car Undergoing Steady State Cornering Using Tire Data

Static Tire Properties Analysis and Static Parameters Derivation to Characterising Tire Model Using Experimental and Numerical Solutions

Finite Element Analysis of Influence of Aspect Ratio on Steady Temperature Distribution in Radial Tires

In-Plane Bending and Shear Deformation of Belt Contributions on Tire Cornering Stiffness Characteristics

Tire cornering simulation using finite element analysis

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

Study on the influence of cornering characteristics of complex tread tires on rolling resistance based on finite element method

An Implicit To Explicit Fea Solving Of Tire F&M With Detailed Tread Blocks

Thermo-mechanical coupling analysis of transient temperature and rolling resistance for solid rubber tire: Numerical simulation and experimental verification

Finite Element Analysis for Steady Temperature on the Rolling Tire Based on the Numerical Inverse of Tests

Steady-State Temperature Field and Rolling Resistance Characteristics of Low-Speed and Low-Load Capacity Non-Pneumatic Tires