Abstract:A new method to describe the tire rolling kinematics and calculate the tire forces and moments is presented.The rolling contact is the core problem of tire/vehicle mechanics as well as wheel/track dynamics.It is extremely difficult to model rolling contact because of the rigid body rotation and the finite deformation occurred.The mixed Lagrange-Euler method is introduced to deal with the calculation of the velocity,acceleration,and contact deformation of rolling contact structure.By using Lagrange framework,the tire velocity and acceleration which include the rigid body rotation and elastic deformation can be obtained by treating the wheel position angles as Cardanic angles,while the Euler method is used to analyze the deformation and forces in the contact area.The dynamic analysis of the rolling structure is thus performed by transferring information between these two kinds of grids in the contact area.Not only can the presented principle be degenerated into Fiala tire model but it can explain the tire ply steer and ply camber phenomenon as well.The method to predict the tire forces and moments is built up by using the proposed kinematic theory and nonlinear finite element method.The detailed analysis of the slipping velocity,contact forces,contact areas,lateral forces of a radial tire have been performed.Study on the parametric sensitivity of the tire lateral forces and self-aligning torque on the tread stiffness and friction coefficient is also carried out.The results show that the tire cornering stiffness and self-aligning stiffness are mainly controlled by the structure stiffness,while the peak lateral force and peak self-aligning torque are mainly controlled by the friction coefficient.The effect of the belt structure to the cornering properties of the large radial tires will be studied by using related experiments and simulations,to verify the principles and methods mentioned above.The proposed methodology provides a new tool to predict tire forces and moments.

In-Plane Bending and Shear Deformation of Belt Contributions on Tire Cornering Stiffness Characteristics

Study on the mechanism of belt cord angle contribution to tire cornering power

Influence of Belt Cord Angle on Radial Tire under Different Rolling States

Static Finite Element Analysis for Effect of Belt Angle on Radial Tire with Complex Tread Patterns

Effect of Belt Construction on Cornering Properties of TBR Tire

Theoretical formulation of tire Gough stiffness based on the high order shear composite beam

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Finite Element Modeling for Steel Cord Analysis in Radial Tires

Analysis and application of FEM in wrap of body belt of radial tire

Prediction Of Tire Cornering Behavior With An Enhanced Friction Model

Finite element analysis for tire cornering characteristics with tread pattern effects

Effect of Rubber Material Properties on Steady-State Flat Belt Response

Study on the Influence of Temperature on Tire Cornering Stiffness and Aligning Stiffness

Prediction of Restriction Width of Carcass by Belts for Radial Tires:Theory,Experiment and Simulation

Finite Element Formulation of Tire with Static Foundation Contact and Its Application

THEORETICAL MODEL OF STEADY STATE TIRE CORNERING PROPERTIES WITH THE COMPLEX DEFORMATION OF CARCASS UNDER CONSIDERATION

Symmetric laminates for enhanced tire durability: A numerical study on belt edge separation

Finding Optimum Ackermann Geometry for a Car Undergoing Steady State Cornering Using Tire Data

Tire cornering simulation using finite element analysis

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Analysis of Extension Propagation Process of Interface Crack Between Belts of a Radial Tire Using a Finite Element Method