Abstract:Gas counter pressure (GCP) technology can impose a reverse pressure to melt and thereby effectively increase the pressure acting on the melt at flow front. Theoretically, it has a potential to solve some defects often occurring in conventional injection molding (CIM) process. This paper designed and manufactured a GCP injection mold. GCP injection molding experiments were conducted. Effects of GCP process on melt flow and density, dimensional accuracy, and mechanical properties of molded samples were investigated. The results showed that GCP process can effectively inhibit the "fountain effect" in melt filling process, decrease the dimensional shrinkage of molded samples, increase dimensional accuracy of samples, and effectively improve impact property of samples. For the samples without weld line, tensile strength and flexural strength of GCP injection molded samples are slightly increased in comparison with those of CIM samples, but for the samples with weld line, GCP process can greatly improve the tensile strength and flexural strength of molded samples. When GCP is 9 MPa and GCP holding time is 10 s, the dimensional accuracy of molded samples without weld line, the tensile strength and flexural strength of the molded samples with weld line all increase up to maximum values. In comparison with CIM samples, the dimensional shrinkage of samples without weld line decreases by 17.2%, the tensile strength and flexural strength of samples with weld line increase by 30.51% and 23.69%, respectively. The impact value of the samples molded by process parameter combination of GCP 9 MPa and GCP holding time 20 s is the highest, and the impact value increases by 18.65%.

Optimization of direct metal printing process parameters for plastic injection mold with both gas permeability and mechanical properties using design of experiments approach

Computational study of rapid direct metal laser sintering for compression mold manufacturing

Optimization of FDM Process Parameters for Mechanical Properties of Aerospace Parts Based on Kriging and CS

Effect of processing parameter changes on mechanical properties during injection molding: Amorphous versus semi‐crystalline materials

A low-cost and highly efficient method of reducing coolant leakage for direct metal printed injection mold with cooling channels using optimum heat treatment process procedures

Numerical Study of the Pore Defects Formation Mechanisms in Selective Laser Melting Process

Direct Metal Laser Sintering to Develop Complex Contours of Aisimg Aluminium Alloy - Build Parameters Optimization

A Simple Method of Reducing Coolant Leakage for Direct Metal Printed Injection Mold with Conformal Cooling Channels Using General Process Parameters and Heat Treatment

Investigation into Manufacturing Injection Mold Via Indirect Selective Laser Sintering

Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy

Effects of Laser Parameters on Printing Quality of Injection Mold Cores

Effect of Process Parameters on Residual Stresses, Distortions, and Porosity in Selective Laser Melting of Maraging Steel 300

Research on the Application of Injection Molding Simulation Technology in Mold Design

Reduction of Process Induced Porosity for Ultrafuse 316L through Parameter Optimization of Creality Ender 3 V2 and Makerbot Method X

Enhancement of Mechanical Performance of Porous Metallic Parts by Resin Infiltration and Selective Laser Sintering

Research on Mechanical Properties and Permeability of 3D-Printed Permeable Steel by Selective Laser Melting

Metal Additive Manufacturing of Plastic Injection Molds with Conformal Cooling Channels

Influence of Process Parameters on Gas-Assisted Injection Molding of Short Glass-Fiber Reinforced PP

A Method to Improve Dimensional Accuracy and Mechanical Properties of Injection Molded Polypropylene Parts

Optimization of the gas-assisted injection moulding process using multiple gas-injection systems

Fabricating Inner Channels in Laser Additive Manufacturing Process Via Thin-Plate-Preplacing Method.