Abstract:Although there has been great progress, the commercialization of proton exchange membrane fuel cells (PEMFCs) is still hindered by high cost due to the use of Pt catalysts. Furthermore, structural improvement of the catalyst layers is limited by inadequate studies of the ultrathin perfluorosulfonic acid ionomer (e.g., Nafion ionomer) film in the catalyst layers. During the preparation of the catalyst ink, the dispersion solvent affects the morphology of Nafion ionomers, which affects the microstructure and proton conduction behavior of the Nafion thin film wrapped on the surface of the catalyst particles after the catalyst layer is formed. To simulate the aggregation of ionomers in the catalyst layer, a self-assembly technology was used to obtain nanoscale Nafion thin films with precise and controllable thickness on a SiO2 model substrate. The proton conductivity and microstructure of the Nafion thin films were obtained through electrochemical impedance spectroscopy and a series of micro-characterization methods. Furthermore, the relationship between proton conduction behavior within ultrathin Nafion films and colloidal morphology in Nafion solution was studied using different organic solvents. The goal was to explore and establish the microstructure model of nanoscale Nafion thin films through micro-characterization technologies, such as nuclear magnetic resonance and dynamic light scattering. It was found that at the nanoscale, Nafion thin films (similar to 40 nm) result in low proton conductivity; an order of magnitude lower than that of bulk membranes (similar to 10-100 mu m). However, replacing iso-propanol with n-butanol (which has a lower dielectric constant) as the dispersion media of the Nafion ionomer improved the proton conductivity of the Nafion thin films. This is because Nafion in solvents with a lower dielectric constant possesses higher main chain solubility and mobility. Thus, Nafion molecules more easily aggregate into large rod-shaped micelles, which is beneficial to the construction of proton conduction channels after the self-assembly process. Furthermore, the electrostatic force between Nafion aggregates and the substrate in solvents with lower dielectric constant is smaller. This means more sulfonic groups are involved in the formation of proton conduction channels that in turn improve the proton conductivity of the Nafion thin film. In general, Nafion in solvents with lower dielectric constant leads to a structure that can facilitate proton conduction. This study provides guidance for optimizing the structure of ultrathin Nafion films and improving the proton conduction in the catalyst layers of PEMFCs.

Performance Comparison of Proton Exchange Membrane Fuel Cells with Nafion and Aquivion Perfluorosulfonic Acids with Different Equivalent Weights as the Electrode Binders

The Impact of Different Side Chain Ionomer on Membrane Electrode Assembly Performance and Durability

Performance analysis of short-side-chain Aquivion® perfluorosulfonic acid polymer for proton exchange membrane water electrolysis

High-temperature low-humidity proton exchange membrane with "stream-reservoir" ionic channels for high-power-density fuel cells

High-Performance Fluorinated Poly(aryl Piperidinium) Membranes for Direct Ammonia Fuel Cells

Transport-Friendly Microstructure in SSC-MEA: Unveiling the SSC Ionomer-Based Membrane Electrode Assemblies for Enhanced Fuel Cell Performance

Quantitative Analysis Effect of the Cathode Catalyst Layer with Various Ionomer Ratio on PEMFC by Protonic Resistance

Enhanced Mass Transfer and Proton Conduction of Cathode Catalyst Layer for Proton Exchange Membrane Fuel Cell Through Filling Polyhedral Oligomeric Silsesquioxane

The importance of water transport on short-side chain perfluorosulfonic acid membrane fuel cells operating under low relative humidity

Fuel cell catalyst layers containing short-side-chain perfluorosulfonic acid ionomers

Effect of Blended Perfluorinated Sulfonic Acid Ionomer Binder on the Performance of Catalyst Layers in Polymer Electrolyte Membrane Fuel Cells

Impact of DAA/water composition on PFSA ionomer conformation

Effects of Dispersion Solvents on Proton Conduction Behavior of Ultrathin Nafion Films in the Catalyst Layers of Proton Exchange Membrane Fuel Cells

Properties and Fuel Cell Performance of Proton Exchange Membranes Prepared from Disulfonated Poly(sulfide Sulfone)

Effect of perfluorosulfonic acid ionomer in anode catalyst layer on proton exchange membrane water electrolyzer performance

High Performance Nanocomposite Proton Exchange Membranes Based on the Nanohybrids Formed by Chemically Bonding Phosphotungstic Acid with Covalent Organic Frameworks

Effect of <i>N</i>-cyclic cationic groups in poly(phenylene oxide)-based catalyst ionomer membranes for anion exchange membrane fuel cells

Perfluorosulfonic acid membranes with reduced hydrogen permeation by filling with carbon quantum dots for fuel cells

Perfluorinated Membrane Electrode Assembly Containing Metal-Free-catalyst Cathode for Anion Exchange Membrane Fuel Cells

Performances of Proton Exchange Membrane Fuel Cells with Alternate Membranes

Porous Nafion nanofiber composite membrane with vertical pathways for efficient through-plane proton conduction