Abstract:We are leveraging our existing success with anion exchange membranes (AEM) to develop new highly stable and highly conductive membranes and ionomers for AEM electrolysis. Our novel and scalable tri-block co-polymers ABA or BAB, where the A block can be functionalized with an advanced chemically stable cation and the B block is an unsaturated polymer that when hydrogenated results in high anion conduction membranes with exceptional mechanical strength and durability analogous to polyethylene (PE). We have also developed a novel immobilization technology for processable catalyst inks. Synergistically the A and B block lengths and chemistries are tuned to achieve all the properties desirable for an anion exchange membrane for electrolyzer applications. Random polymers of the same A and B chemistries can also be formulated for additional fidelity in chemically compatible ionomers for the membrane electrode assemblies (MEA). These systems are unique in that they achieve very high dissociation of anions beyond OH - , giving CO 3 2- σ60°C and 25 cm 2 cells. We have begun to understand the science behind ionomer catalyst interactions and initially used a commercial Ag nano-catalyst as a model system. Few ave studied the effect of ionomer chemistry and catalyst or catalyst type and loadings on performance. We have shown durability of > 600 h at 0.5 A cm -2 and continue to see improvements. It should be noted that the voltage is dropping in theses tests, at end of test at –ve 60 μV h -1 is achieved, while this may be interpreted as evidence of membrane thinning when the cell was dissembled the membrane thickness was ca. the same as at the beginning of test (80 μm), indicating slow, but long term conditioning, the cell did not reach the point at which a +ve degradation rate was observed. Further investigation of cell conditioning indicated that these cells currently take 40-50 hs under load to reach steady state operation (this break in time will be understood and significantly shortened) giving 400MV improvement at 1 A cm -2 . With a MnO 2 catalyst the voltage at 0.5 A cm -2 drops to 1.5 V indicating that the target of 2 A cm -2 at 1.8 V will be easily achieved with further investigation.

Proton Exchange Membrane Water Electrolysis Incorporating Sulfo-Phenylated Polyphenylene Catalyst Coated Membranes

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Ultramicroporous Crosslinked Polyxanthene-Poly(biphenyl piperidinium)-based Anion Exchange Membranes for Water Electrolyzers Operating under Highly Alkaline Conditions

Composite anion exchange membranes based on polysulfone and silica nanoscale ionic materials for water electrolyzers

Polybenzimidazole‐Reinforced Terphenylene Anion Exchange Water Electrolysis Membranes

Proton-conducting membranes from poly(ether sulfone)s grafted with sulfoalkylamine

Hydrocarbon-Based Composite Membrane Using LCP-Nonwoven Fabrics for Durable Proton Exchange Membrane Water Electrolysis

Reinforced Polyphenylene Ionomer Membranes Exhibiting High Fuel Cell Performance and Mechanical Durability

Understanding How Anion Exchange Membranes and Cationic Polymer/Catalyst Interactions Behave with Time in Alkaline Electrolysis

Proton exchange composite membranes from blends of brominated and sulfonated poly(2,6-dimethyl-1,4-phenylene oxide)

Phosphoric Acid Doped Composite Membranes from Poly (2,5-Benzimidazole) (ABPBI) and CsxH3−xPW12O40/CeO2 for the High Temperature PEMFC

All‐Hydrocarbon MEA for PEM Water Electrolysis Combining Low Hydrogen Crossover and High Efficiency

Evaluating the performance of hybrid proton exchange membrane for PEM water electrolysis

Poly(biphenyl piperidinium) Anion Exchange Membranes for Alkaline Water Electrolyzers: The Effect of Nonionic Pendant Groups

Preparation and Study of Sulfonated Co-Polynaphthoyleneimide Proton-Exchange Membrane for a H2/Air Fuel Cell

Branched Sulfonimide-Based Proton Exchange Polymer Membranes from Poly(Phenylenebenzopheneone)s for Fuel Cell Applications

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes

Multi-Block Copolymer Membranes Consisting of Sulfonated Poly(p-Phenylene) and Naphthalene Containing Poly(Arylene Ether Ketone) for Proton Exchange Membrane Water Electrolysis

Superhydrophilic polyphenylene sulfide membrane with enhanced ion transfer for alkaline water electrolysis

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes