Abstract:Bifunctional initiators with two labile groups ( e g peroxides or azo groups) are frequently used in the polymer industry for the synthesis of vinyl polymers and resin curing In general, there are two types of bifunctional initiators: one is symmetrical bifunctional initiators containing two labile groups of equal structure, the other is unsymmetrical bifunctional initiators containing two labile groups of unequal structure One of the potential advantages of using bifunctional initiators is that high polymer molecular mass and high polymerization rate can be obtained simultaneously by controlling the initiator decomposition rate through optimal reaction temperature programming For free radical polymerization of methyl methacrylate (MMA) with monofunctional initiators, the kinetics is reasonably well understood in both low and high monomer conversion regimes However, the presence of an additional labile group in bifunctional initiators makes the polymerization kinetics very complicated. This is because labile groups such as peroxides become redistributed repeatedly in the growing and inactive polymers and they are engaged in further initiation, propagation, chain transfer and termination reactions during the course of polymerization. The effects of temperature and initiator concentration on the kinetics of MMA bulk polymerization initiated by 2,5 dimethyl 2,5 bis(2 ethyl hexanoyl peroxide) hexane (TX 141) were investigated.The energy of activation of MMA bulk polymerization initiated by TX 141 was about 91 kJ·mol -1 , and that of TX 141 decomposition was about 140 kJ·mol -1 , which was more close to the experimental data.The reaction order of TX 141 concentration was about 0 72,because there was mono and bi molecule termination. The kinetic comparison initiated by TX 141 and benzoyl peroxide (BPO) with the same half life period showed that the kinetics was the same when the concentration of TX 141 was half of that of BPO.But, the number average molecular mass ratio of that initiated by TX 141 to that by BPO was from 1 2 to 1 33 increasing with the conversion.There was an exothermal peak in the DSC curve of polymer initiated by TX 141 at low conversion, but there was no peak at high conversion and no peak was observed for the polymer initiated by BPO.It was shown that the two functional groups of bifunctional initiator decomposed at different times during the polymerization process.

Preparation of Copolymer Systems of 2-(Isocoumarin-3-yl)-2-oxoethyl Methacrylate with Methyl Methacrylate and Thermal Decomposition Kinetics

Emulsion polymerization of methyl methacrylate in concentration of emulsifiers below their CMCs—polymerization rate, particle size, and particle-size distribution

Free-radical Crosslinking Copolymerization of Methyl Methacrylate/Triallyl Isocyanurate

Synthesis and thermal analysis of poly(methyl methacrylate) oligomer functionalized polyethylene block copolymer

Improvement of the physical properties of poly(methyl methacrylate) by copolymerization with N -pentafluorophenyl maleimide; zero-orientational and photoelastic birefringence polymers with high glass transition temperatures

Kinetics for copolymerization of methyl methacrylate withN-cyclohexylmaleimide

New Monomer Based on Eugenol Methacrylate, Synthesis, Polymerization and Copolymerization with Methyl Methacrylate–Characterization and Thermal Properties

Study of Kinetic of Emulsion Copolymerization of Methyl Methacrylate/ethyl Acrylate

Atom transfer radical copolymerization of methyl methacrylate withN-cyclohexylmaleimide

Studies on Thermomechanical Characteristics of Poly(Methyl Methacrylate) and Ethylene-Methyl Acrylate Copolymer Blends

Microwave-Assisted Synthesis of Cross-Linked Co-poly(itaconic anhydride-methyl methacrylate): The Effects of the Molar Ratio and Cross-Linking Agent on the Thermal Stability

Kinetics of Suspended Emulsion Polymerization of Methyl Methacrylate

Synthesis of Heat-resistant Star-shaped Copolymer of Methyl Methacrylate

Kinetics of methyl methacrylate polymerization initiated by bifunctional initiator

Effect of methyl methacrylate concentrations on surface and thermal analysis of composite polymer polymethylmethacrylates with mesogen reactive RM82

Copolymers of methyl methacrylate with N‐trifluorophenyl maleimides: High glass transition temperature and low birefringence polymers

Thermal Safety and Overall Kinetics for Methyl Methacrylate Solution Polymerization via On-line Process Analytical Technology

A Kinetic Investigation of Thermally Initiated Emulsion Copolymerization of Styrene and Methylmethacrylate Without Conventional Initiators

Temperature effect on polymerization kinetics of poly methyl methacrylate (PMMA)

Structure, Morphology and Interfacial Behaviour of Ethylene/methacrylate Copolymers

Radical copolymerization between methyl methacrylate andN-cyclohexylmaleimide with thiol as an inifer