Abstract:The oxidative reduced bulk polymerization system of MMA with BPO/DMA as composite initiator was used to study the effects of the ratio of BPO to DMA and the amount of overall initiator on the mechanical properties of the polymerized PMMA sheets, and the changes of the mechanical properties of the plates under high and low temperature conditions were studied. Thermoplastic PMMA was rarely exploited in continuous fiber‐reinforced composites due to its viscous high‐temperature molten fluid as well as pessimistic wettability into fiber fabric. Redox‐active polymerization is a green route to develop a new liquid PMMA resin at room temperature to provide an in situ curing with the advantages of energy saving and consumption reduction. In this paper, BPO/DMA was adopted as a redox initiator pair, and the effect of MMA:BPO:DMA ratio on curing time, Mn, Tg, and mechanical properties of PMMA were systematically studied. When the ratio of MMA:BPO:DMA is 200:1.2:1, PMMA‐200 achieved optimistic mechanical properties at 20°C (tensile strength, 64.7 MPa; tensile modulus, 3352 MPa; bending strength, 125.3 MPa; bending modulus, 3023 MPa). Moreover, the mechanical properties were further improved at low temperatures. The maximum tensile strength and tensile modulus were up to 97.43 and 4297 MPa (−40°C) respectively. The tensile strength (0°, 1103 MPa; 90°, 52.3 MPa) and tensile modulus (0°, 47.5 GPa; 90°, 14.2 GPa) of glass‐fiber‐reinforced PMMA composite at 20°C were found to be comparable with epoxy resin‐based composites and even higher at lower temperature. In summary, redox‐initiated PMMA and its fiber‐reinforced composites are promising thermoplastic materials as new lightweight alternatives. Highlights Preparation method of PMMA resin and glass fiber composite. Research on the mechanical properties, molecular weight, glass transition temperature, curing time, etc. of PMMA resin. Testing of mechanical properties of PMMA glass fiber composites at room temperature and low temperature. Current applications and prospects of PMMA glass fiber composites.

Improvement of the physical properties of poly(methyl methacrylate) by copolymerization with N -pentafluorophenyl maleimide; zero-orientational and photoelastic birefringence polymers with high glass transition temperatures

Copolymers of methyl methacrylate with N‐trifluorophenyl maleimides: High glass transition temperature and low birefringence polymers

A novel copolymer of methyl methacrylate with N-pentafluorophenyl maleimide: High glass transition temperature and highly transparent polymer

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

A novel polymethyl methacrylate (PMMA) with excellent optical and thermal properties-bearing hydroxyadamamtyl substituent

Synthesis and Characterization of Poly[4‐(2‐thiazolylazo)phenyl Methacrylate]‐co‐poly(methyl Methacrylate)

A Novel Transparent Cross-Linked Poly(Methyl Methacrylate)-Based Copolymer with Enhanced Mechanical, Thermal, and Flame-Retardant Properties

Crosslinked Poly(methyl Methacrylate) with Perfluorocyclobutyl Aryl Ether Moiety As Crosslinking Unit: Thermally Stable Polymer with High Glass Transition Temperature

Radical reaction extrusion copolymerization mechanism of MMA and N-phenylmaleimide and properties of products

Investigation by molecular dynamics simulation of the glass transition temperature and elastic properties of amorphous polymers PMMA, PMAAM and PMMA co PMAAM copolymers

Synthesis and characterization of crosslinked transparent poly(ester-urethane-acrylate) containing methyl methacrylate

Core-Shell Particles Of Poly(Methyl Methacrylate)-Block-Poly(N-Butyl Acrylate) Synthesized Via Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And The Polymer'S Application In Toughening Polycarbonate

Influence of Methyl Methacrylate-Co-glycidyl Methacrylate Copolymers on the Compatibility, Morphology and Mechanical Properties of Poly(butylene Terephthalate) and Polycarbonate Blends

Enhanced Thermal Stability and Flame Retardancy of a Novel Transparent Poly(Methyl Methacrylate)-Based Copolymer

Effect of methyl methacrylate concentrations on surface and thermal analysis of composite polymer polymethylmethacrylates with mesogen reactive RM82

In Situ Copolymerized Toughened Polymethyl Methacrylate (PMMA) with Highly Transparency for Support Film of Polarizers

Synthesis and Characterization of Trifluoromethyl Substituted Styrene Polymers and Copolymers with Methacrylates: Effects of Trifluoromethyl Substituent on Styrene

The preparation and mechanism of permanently flame retardancy, antistatic, good toughness and high transparent poly(methyl methacrylate)

A novel thermoplastic material: Pre‐polymerized PMMA liquid resin and continuous glass fiber‐reinforced composite initiated by benzoyl peroxide/N,N‐dimethylaniline

PMMA-driven morphology modification and dramatic improvement in ductility for PVDF/PLA blends

Visible Light–Induced RAFT Polymerization of Methacrylate with 4‐( N , N ‐diphenylamino)benzaldehyde as Organophotoredox Catalyst and the Effect of Temperature on the Polymerization