Abstract:Journal of Dental Research, Ahead of Print. The coloring process of monolithic dental zirconia caused considerable debate on the possible effects of different coloring methods. The main objective of this study was to investigate the influence of pigments in 3 multilayer 5-mol% yttria partially stabilized zirconia (5Y-PSZ) disks (Lava Esthetic A2 [Zr-AGG_A2] and Bleach [Zr-AGG_BL], both 3M Oral Care, and Katana STML A2 [Zr-NoAGG], Kuraray Noritake). The influence of pigment addition on the translucency parameter (TP00), fracture toughness, Vickers hardness, biaxial strength, and hydrothermal stability was assessed and correlated with the microstructure and phase composition. The pigment composition and distribution were evaluated by light and fluorescence microscopy, electron probe microanalysis, and nano–scanning electron microscopy. The chemical and phase composition and aging behavior were assessed using X-ray fluorescence and X-ray diffraction, respectively, while the aging sensitivity of the pigments was evaluated using micro-Raman spectroscopy. In contrast to Zr-NoAGG, possessing a typical 5Y-PSZ microstructure, the pigment additions in both Zr-AGG_A2/BL zirconia resulted in large yellow and blue fluorescent Er-, Hf-, and Al-containing agglomerates composed of small grains (0.57 μm and 0.38 μm, respectively, vs. 0.92 μm for the surrounding grains) with lower Y2O3 content. Zr-AGG_A2 had the lowest aging resistance, with transformation degradation occurring exclusively within the pigment agglomerates. All zirconia grades had a high Y2O3 content (4.2%–5.7 mol%) tetragonal ZrO2 phase and a high (42%–55 wt%) cubic ZrO2 phase content. Although no statistical differences were measured for hardness and toughness, Zr-NoAGG had a significantly higher TP00, higher flexural strength, and lower mechanical reliability compared to both Zr-AGG_A2/BL zirconia. The rare-earth oxide-containing zirconia agglomerates that were added as pigments to the multilayered monolithic Zr-AGG_A2/BL zirconia are the cause for their lower optical and mechanical properties and reduced aging resistance.

Effects of added aluminum chromium slag on the structure and mechanical properties of colored zirconia ceramics

Effect of Pigmentation on the Mechanical Properties and Microstructure of Dental 3Y-TZP Ceramics

Effects of Aging on the Mechanical Properties of Dental Pigmented 3Y-Tzp Ceramics

Microstructure, mechanical properties, friction and wear performance, and cytotoxicity of additively manufactured zirconia-toughened alumina for dental applications

Effects of Zircon Additive on the Properties of 95-Alumina Ceramic

Microstructure and mechanical properties of dense ZTA ceramics with high Cr2O3 solution

Effect of metal elements in coloring liquids used in the infiltration method on the physical properties of zirconia

Effects of Sr2Nb2O7 additive on microstructure and mechanical properties of 3Y–TZP/Al2O3 ceramics

Synthesis of Coloured Dental Zirconia Ceramics and Their Mechanical Behaviors

Coloring Multilayer Zirconia May Affect Its Optical and Mechanical Properties

Effect of Zr2Al4C5 Content on the Mechanical Properties and Oxidation Behavior of ZrB2-SiC-Zr2Al4C5 Ceramics

The mechanical properties, tribological behaviors and color stability of a feldspar nanoceramics strengthening extrinsic stain for high-translucent zirconia

Effect of zirconia sol on the microstructure and properties of Al2O3-based ceramic fabricated from natural bauxite

Mechanical properties and calcium–magnesium–alumino–silicate corrosion behaviour of Ce/Gd co-doped SrZrO3 ceramics

Effect of air abrasion and dye on the surface element ratio and resin bond of zirconia ceramic

Production and properties of tooth-colored yttria stabilized zirconia ceramics for dental applications

High Strength and Toughness in Chromatic Polymer-Infiltrated Zirconia Ceramics.

Effect of Al2O3 on Crystallization, Microstructure, and Properties of Glass Ceramics Based on Lead Fuming Furnace-Slag

Microstructure, phase evolution, mechanical properties and slag corrosion resistance of ZrO2 reinforced Al2O3–Cr2O3 composites

Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing

Effect of Dy2O3 content on microstructure and mechanical properties of zirconia-toughened alumina