Abstract:The magnetron sputtered La0.7Sr0.3MnO3 films were implanted with different doses (5 ′ 1015 ions×cm?2 and 5 ′ 1016 ions×cm-2) of Al ions at different negative pulsed voltages (30 kV and 50 kV) by plasma based ion implantation and then annealed at 973 K for 1 h in air. The microstructure, surface morphologies, surface roughness, metal-insulator transition and room temperature emittance properties of the post-implantation annealed films were investigated and compared with those of the La0.7Sr0.3MnO3 film annealed at 973 K for 1 h in air. The results indicate that the post- implantation annealed films show single perovskite phase and obvious (100) preferred orientation growth. The Mn-O bond length, surface roughness and metal-insulator transition temperature (TMI) of the films can be effectively adjusted by changing implantation voltage or implantation dose of Al ions. However, the change of implantation parameters just has a small effect on room temperature emittance of the films. Compared with the annealed film, the post-implantation annealed films have shorter Mn-O bond length and lower room temperature emittance. The TMI of the films implanted at low voltage is lower than that of the annealed film, which mainly results from the degradation of oxidization during annealing process and the part displacement of Mn3+-O2+- Mn4+ double exchange channels by Al3+-O2?-Mn4+. The post-implanted annealed film implanted at 50 kV/5 ′ 1016 ions×cm-2 has a higher TMI than the annealed film, which is 247 K. The increase of TMI of the film implanted with high dose of Al ions at high voltage can be attributed to the improvement of microstructure.

Influence of post-annealing on Mn-doped (K0.5Na0.5)NbO3 thin films

Effect of Anneal Conditions on Electrical Properties of Mn-Doped (na0.85k0.15)(0.5)bi0.5tio3 Thin Films Prepared by Sol-Gel Method

Effects of Magnetic-Field Annealing on the Morphology and Magnetic Properties of La 0.7 Sr 0.3 MnO 3 Film

Effect of Thermal-Annealing on the Magnetoresistance of Manganite-Based Junctions

Comparative study of thermal annealing effect on undoped and Mn-doped (K,Na)NbO3 nanofibers

Composition Regulation of Potassium Sodium Niobate Thin Films Through Post-Annealing under Alkali Element Atmospheres

Enhanced Ferroelectric Properties in Mn-doped K0.5Na0.5NbO3 Thin Films Derived from Chemical Solution Deposition

Influence of Annealing on the Properties of Mn and N Co-Doped Zn0.88Mn0.12O:N Films

Effects of Thickness on Structures and Electrical Properties of Mn-doped K0.5Na0.5NbO3 Films

Influence of Post Deposition Annealing on Crystallinity and Dielectric Properties of Bismuth Magnesium Niobate Thin Films

Effect of Post-Annealing on the Structure and Fluorescence Properties of Ymno3 Thin Films

Effects of Mn-doping on anti-fatigue and anti-leakage current characteristics in KNN single crystals

Structures, Electrical Properties, and Leakage Current Behaviors of Un-Doped and Mn-Doped Lead-Free Ferroelectric K0.5na0.5nbo3 Films

Energy Storage Performance of (K, Na)NbO3 Ferroelectric Thin Films with Mn-Ta and Mn-Ti Co-Doping

The Effect of Annealing Temperatures on the Microstructure of La0.5ca0.5mno3 Films

Oxygen Defect Engineered Magnetism of La2NiMnO6 Thin Films

Effects of Microwave-Assisted Annealing on the Structure and Magnetic Properties of (nd0.75pr0.25)9fe72ti1zr3mn X Mo4−x B10.5C0.5 Amorphous Ribbons

Effect of excessive K and Na on the dielectric properties of (K,Na)NbO3 thin films

Characteristics of La0.7Sr0.3MnO3 Films Modified by Aluminum Ions Implantation and Post-Implantation Annealing

Improving the sensitivity of LaMnO 3 NTC films by Al ion implantation

Microstructure, Colossal Magnetoresistance Effect and Thermal Infrared Property of Annealed La0.7Sr0.3MnO3−δ Thin Films on Si(100)