Abstract:A potential application for Pb(Mg1/3Nb2/3)O3-Pb(Zr0.52T{i}0.48)O3 (PMN-PZT) piezoelectric material is micro positioning and actuation for hard disk drives. And this material was developed and the processing of a piezoelectric multilayer element for stacking and co-firing Ag/Pd electroded tape casting layers was investigated. The formation mechanisms of PMN-PZT ternary solid solution prepared by the mixed oxides techniques has been characterized by differential thermal analysis (DTA) and thermal gravimetric analysis (TGA). The sintered microstructure and composition of the PMN-PZT multilayer elements were investigated by scanning electron microscope (SEM), and X-ray spectrometer (EDX). The data from DTA/TGA stress the importance of a slow debonding from room temperature to 500 ∘C. The joining of the electrode to the PMN-PZT layer confirms that the internal electrodes are well defined and is well interconnected to the PMN-PZT layer. The ferroelectric polarization-electric (P-E) hysteresis loops of the piezoelectric films were also measured. The remanent polarization and coercive field calculated from the P-E curves decreased with decreasing the number of PMN-PZT multilayer films from 10-layer to 4-layer. After that, a novel U-type micro-actuator attached to each side via piezoelectric elements was also practically measured by laser Doppler vibrometer in order to testify the driving mechanics of it. The highest displacement/voltage sensitivity of 1.496 μm/±20 V is achieved by the micro-actuator with two 10-layer elements. The corresponding resonance frequency of the sway mode is high at 12 kHz.

Integration of buried piezoresistive sensors and PZT thin film for dynamic and static position sensing of MEMS actuator

PZT MEMS ACTUATOR WITH INTEGRATED BURIED PIEZORESISTORS FOR POSITION CONTROL

Feedback Control of Thin Film PZT MEMS Actuator with Integrated Buried Piezoresistors

Design and Fabrication of Non-Resonant PZT MEMS Micromirror with Buried Piezoresistors for Closed Loop Position Control

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers

Feedback Controlled Pzt Micromirror with Integrated Buried Piezoresistors

Fabrication and FEM Analysis of a Piezoelectric Thin-Film Microactuator

Preparation and Properties of Piezoelectric Elements by Sol-Gel Process for Micro-actuator Application

High Quality PZT Thick Films Using Silicon Mold Technique for MEMS Applications

Fabrication of PZT microdevices using a high-yield sol-gel process

Fabrication and Evaluation of Porous Piezoelectric Ceramics and Porosity–Graded Piezoelectric Actuators

Fabrication of (100) Orientated PZT Thin Films for MEMS Applications

Fabrication and evaluation of PZT/Pt piezoelectric composites and functionally graded actuators

PZT-based flexible piezoelectric sensors for real-time condition monitoring

Design and Analysis of a PZT-based Micromachined Acoustic Sensor with Increased Sensitivity

Enhancing Displacement of Lead–zirconate–titanate (PZT) Thin-Film Membrane Microactuators Via a Dual Electrode Design

Structure and Electrical Properties of PMN-PZT Micro-Actuator Deposited by Tape-Casting Process

Fabrication of Functionally Graded PZT/Pt Piezoelectric Actuators.

Different textured PZT thin films grown on a single SiO2/Ti/Pt stack for piezo MEMS applications

Integrated Piezoresistive Normal Force Sensors Fabricated Using Transfer Processes with Stiction Effect Temporary Handling