Abstract:Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a promising material because of its favorable electrical and mechanical properties, stability in ambient environments, and biocompatibility. It finds broad application in energy storage, flexible electronics, and bioelectronics. Additive manufacturing opens a plethora of new avenues to form and shape PEDOT:PSS, allowing for the rapid construction of customized geometries. However, there are difficulties in printing PEDOT:PSS while maintaining its attractive properties. A 3D printing method for PEDOT:PSS using a room‐temperature coagulation bath‐based direct ink writing technique is reported. This technique enables fabrication of PEDOT:PSS into parts that are of high resolution and high conductivity, while maintaining stable electrochemical properties. The coagulation bath can be further modified to improve the mechanical properties of the resultant printed part via a one‐step reaction. Furthermore, it is demonstrated that a simple post‐processing step allows the printed electrodes to strongly adhere to several substrates under aqueous conditions, broadening their use in bioelectronics. Employing 3D printing of PEDOT:PSS, a cortex‐wide neural interface is fabricated, and intracranial electrical stimulation and simultaneous optical monitoring of mice brain activity with wide field calcium imaging are demonstrated. This reported 3D‐printing technique eliminates the need for cumbersome experimental setups while offering desired material properties. Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has received increasing attention in the research community due to favorable properties for developing bioelectronic devices. This work reports a simple 3D printing method (direct ink writing) to directly pattern PEDOT:PSS into desired structures. The printed parts have excellent mechanical and electrochemical properties, which allows for the fabrication of a precise cortex‐wide neural interface for brain stimulation.

Preparation and Stability of PEGDA/GO Conductive Materials by DLP 3D Printing

DLP 3D Printing of Electrically Conductive Hybrid Hydrogels Via Polymerization-Induced Phase Separation and Subsequent in Situ Assembly of Polypyrrole

Graphene Oxide Based Transparent Resins For Accurate 3D Printing of Conductive Materials

Role of GO and Photoinitiator Concentration on Curing Behavior of PEG-Based Polymer for DLP 3D Printing

Fabrication of Conducting Polyacrylate Resin Solution with Polyaniline Nanofiber and Graphene for Conductive 3D Printing Application

3D Printing of Multifunctional Conductive Polymer Composite Hydrogels

Digital Light Processing 3D Printing of Conductive Complex Structures

Attapulgite‐Reinforced Robust and Ionic Conductive Composite Hydrogels for Digital Light Processing 3D Printing

Mechanical and Electrical Properties of 3D‐Printed Highly Conductive Reduced Graphene Oxide/Polylactic Acid Composite

3D printing of conducting polymers

Process Analysis of DLP Photocuring 3D Printing with Modified High-strength Resin

Imparting High Conductivity to 3D Printed PEDOT:PSS

Development of Novel 3d Printable Graphene-based Composite Towards Fabrication of Thin Film Electrode Material

3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide

Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing

Single droplet 3D printing of electrically conductive resin using high aspect ratio silver nanowires

Preparation and Characterization of Carbon Based Composite Conductive Ink

Preparation of Paper-Based Conductive Pattern for 3D Printing

Solution-Processable PEDOT Particles for Coatings of Untreated 3D-Printed Thermoplastics

Coagulation Bath‐Assisted 3D Printing of PEDOT:PSS with High Resolution and Strong Substrate Adhesion for Bioelectronic Devices

Printability study of self-supporting graphene oxide-laponite nanocomposites for 3D printing applications