Abstract:To improve printing fidelity, reducing the slice thickness to eliminate the staircase effect is of great importance for digital light processing (DLP) technology. However, using a thinner slice printing model leads to a longer total printing time in the conventional DLP approach, which significantly reduces printing efficiency. In this work, a tunable pre-curing DLP approach was developed where the relationship between the forming layer thickness and ultraviolet (UV) exposure time is theoretically analyzed, and the curing process of photo-curable solutions is divided into two sub-processes: pre-curing and further curing. In the pre-curing process, the photo-curable solution is initially pre-cured and kept at the pre-gelled state due to continuous UV exposure during subsequent DLP printing. Then, the pre-cured photo-curable solution is quickly cured to form a designed thickness in each printing cycle. Also, the UV absorbing agent is added to the photo-curable hydrogel solutions to regulate the pre-curing process. Using a 10 μm slice for DLP printing, the total printing time of the tunable pre-curing DLP is approximately 5.6% of the conventional DLP, and the staircase effect on the surface is significantly eliminated using 10 μm slice tunable pre-curing DLP approach, which leads to a better printing fidelity. Thus, both printing fidelity and efficiency are significantly and simultaneously improved by the tunable pre-curing DLP approach. Moreover, the reduction of UV exposure time and slice thickness is beneficial for cell viability during DLP bioprinting of thick bulk structures, which is demonstrated by the printing of PC12 cell-laden gelatin methacrylate (GelMA) bioinks. Using the tunable pre-curing DLP approach, the PC12 cells achieved higher cell viability (90.2 ± 6.1%) and better cell morphology than the conventional DLP approach (54.5 ± 4.8%). The tunable pre-curing DLP approach provides a promising alternative to extend the application of DLP printing greatly.

Role of GO and Photoinitiator Concentration on Curing Behavior of PEG-Based Polymer for DLP 3D Printing

Preparation and Stability of PEGDA/GO Conductive Materials by DLP 3D Printing

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Process Analysis of DLP Photocuring 3D Printing with Modified High-strength Resin

Method for Obtaining Light Curing Printing Condition Based on New Theoretical Description

Modeling the Printability of Photocuring and Strength Adjustable Hydrogel Bioink During Projection-Based 3D Bioprinting.

Preparation and Properties of Functional Materials Based on Digital Light Processing 3D Printing

High-fidelity and high-efficiency additive manufacturing using tunable pre-curing digital light processing

Photocurable High-Energy Polymer-Based Materials for 3D Printing

Graphene Oxide Based Transparent Resins For Accurate 3D Printing of Conductive Materials

Recyclable Thermosetting Polymers for Digital Light Processing 3D Printing

Photoactive Resin Formulations and Composites for Optical 3D and 4D Printing of Functional Materials and Devices

High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing

Effect of functionality of diluents on digital light processing (DLP) based three‐dimensional (3D) printing of UV‐curable bisphenol A‐based epoxy acrylate resin

Dual-Curing Polymer Systems for Photo-Curing 3D Printing

Additives for Ambient 3D Printing with Visible Light

Synthesis and Characterization of Stereolithography 3D Printing Fluorescent Resin

Rapid High-Resolution Visible Light 3D Printing

Experimental Investigation of Mechanical Properties of UV-Curable 3D Printing Materials

Design and synthesis of photocrosslinker and light blocker based on l-Amino acid polyester and their application in solvent-free resin formulation for DLP/SLA 3D printing

Recent Trends in Advanced Photoinitiators for Vat Photopolymerization 3D Printing