Abstract:Conductive polymer composites (CPCs) play an important role in various industrial applications including anti-static materials, electromagnetic interference shielding, sensors, and so forth. However, the contradiction between high conductivity and mechanical properties, especially tensile strength, is hard to balance many CPCs. In this paper, a self-reinforced polypropylene (PP)/graphene composite with segregated structures was fabricated by a novel coating-reducing-pressing method. By controlling the hot-pressing parameters, a special structure consisting of both an interconnected conductive graphene network and an unmolten fiber phase in a PP matrix can be obtained. PP/graphene composites with such a structure showed not only excellent electric properties but also outstanding mechanical properties. A super-low electrical percolation threshold of 0.0043 vol % was reached for the composites because of an effective formation of the conductive graphene network. The conductivity of composites with only 1.85 wt % graphene reached to 4.09 S/m. The composites also showed good electromagnetic shielding effectiveness under an X band with the highest EMI of 29.3 dB at 10 GHz. The existence of the PP fiber phase contributed to the improved mechanical strength and toughness of the self-reinforcing conductive composites compared to the blending samples, which made it even stimuli-responsive for bending deformation. These results were believed helpful in the design and fabrication of a new kind of conductive self-reinforced polymer composites.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c00825?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c00825</a>.Parameters of preparation of self-reinforced PP and PP/RGO by hot compaction, preparation of self-reinforced PP and PP/RCO, and weight fraction and volume fraction of PPNWF/RGO with various coating times (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c00825/suppl_file/ie0c00825_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Mechanical and Electrical Properties of 3D‐Printed Highly Conductive Reduced Graphene Oxide/Polylactic Acid Composite

3D printing strong and conductive geo-polymer nanocomposite structures modified by graphene oxide

Graphene Oxide Based Transparent Resins For Accurate 3D Printing of Conductive Materials

3D Printing of Graphene Oxide Composites with Well Controlled Alignment

High Electrical Conductivity in Polydimethylsiloxane Composite with Tailored Graphene Foam Architecture

High Areal Capacitance and Rate Capability of 3D-Printed Thick Electrodes with Optimized Conductive Networks from the Core-Sheath Structure

Highly conductive, mechanically strong graphene monolith assembled by three-dimensional printing of large graphene oxide.

Printability study of self-supporting graphene oxide-laponite nanocomposites for 3D printing applications

Development of Novel 3d Printable Graphene-based Composite Towards Fabrication of Thin Film Electrode Material

Preparation and Stability of PEGDA/GO Conductive Materials by DLP 3D Printing

Self-Reinforced Polypropylene/Graphene Composite with Segregated Structures To Achieve Balanced Electrical and Mechanical Properties

Synthesis and Electrical Percolation of Highly Amorphous Polyvinyl Alcohol/Reduced Graphene Oxide Nanocomposite

Mechanical Properties Analysis on the Reduced Graphene Oxide/Silver Nano Particle / Poly Lactic Acid Composites

Conductive graphene-based coagulated composites for electronic printing applications

High speed 3D material-jetting additive manufacturing of viscous graphene-based ink with high electrical conductivity

Microfluidic Printing of Three-Dimensional Graphene Electroactive Microfibrous Scaffolds.

Strong Reduced Graphene Oxide–polymer Composites: Hydrogels and Wires

3D-printed hierarchical porous and multidimensional conductive network based on conducting polymer/graphene oxide

In situ thermally reduced graphene oxide/epoxy composites: thermal and mechanical properties

Highly Ordered 3D Graphene-Based Polymer Composite Materials Fabricated by “Particle-Constructing” Method and Their Outstanding Conductivity

Electrical conductivity analysis of extrusion-based 3D-printed graphene