Abstract:In recent years, the liquid temporary plugging agent has drawn extensive attention, especially in the repeated fracturing operation for stimulating unconventional oil and gas reservoir production. This paper developed a novel self-degradable gel (SDG) as a liquid temporary plugging agent for high-temperature reservoirs. The gelation process, viscoelasticity, pressure-bearing capacity, self-degradation, and formation protection performance of the SDG were systematically investigated. Moreover, the gelation and self-degradation mechanism of the SDG were revealed by studying the viscosity variation and the microstructures. Considering the gelation time and gel strength, the composition of the SDG was optimized as 6.0–10.0 wt% monomer, 0.004–0.012 wt% initiator, and 0.2–0.4 wt% crosslinker. The SDG transformed from liquid to solid-like gel within 30 to 90 min at 90–130 °C. The rheological results showed that the duration of the low viscosity state exceeded 75 % of the total gelation process at high temperatures, which was conducive to the injection of the SDG. In addition, the viscosity of the SDG after gelation was more than 100 Pa·s, which ensured its effective plugging in fractures. The experimental results with fractured cores showed that the bearing pressure of the SDG remained above 30 MPa/m in fracture with a width of 2.05–5.04 mm, which could meet the requirements of the repeated fracturing operation. Moreover, the SDG could spontaneously degrade from solid-like gel to liquid with a viscosity of lower than 10 mPa·s in 10–105 h at 90–130 °C. The broken-gel liquid could be completely displaced out of the fractured core, and the core damage rate was less than 5.0 %, which ensured the restoration of conductivity of the previously existing fractures. Micrographs showed that the dense three-dimensional network structure with high viscosity was formed by polymerization and crosslinking. Then, the acrylic acids in the polymer chain were broken at high temperatures, resulting in the gradual destruction of the gel and the spontaneous degradation of SDG.

The Potential of Ultrahigh Strength Gel through Novel Multistage Reinforcement Method for Sealing Operations in Medium to Ultralow Temperature Reservoirs

Development and Gelation Mechanism of Ultra-High-Temperature-Resistant Polymer Gel

A novel self-degradable gel (SDG) as liquid temporary plugging agent for high-temperature reservoirs

Development of dual-crosslinked nanocomposite gel for water management in high-temperature reservoirs

Unlocking the potentials of gel conformance for water shutoff in fractured reservoirs: Favorable attributes of the double network gel for enhancing oil recovery

Structure Optimization and Mechanical Model for Microgel-Reinforced Hydrogels with High Strength and Toughness

Preparation Method and Performance Evaluation of a Gel Based on AM/AMPS Copolymer

Preparation and Performance Evaluation of Temperature-Resistant and Salt-Resistant Gels

Doubly cross‐linked polymer gels with ultra‐high‐thermal stability for hydrofracking

Preparation of high-temperature gels for enhanced oil recovery using methyl etherized melamine-formaldehyde resin

Supramolecular polymer-based gel fracturing fluid with a double network applied in ultra-deep hydraulic fracturing

Novel Gel with Controllable Strength for In-Depth Conformance Control: Bulk Gelation Performance and Propagation Properties in Porous Media

Degradable Gel for Temporary Plugging in High Temperature Reservoir and Its Properties

Preparation and Characterization of Temperature-Sensitive Gel Plugging Agent

New Insights and Experimental Investigation of High-Temperature Gel Reinforced by Nano-SiO2

Preparation and rheological properties of organic zirconium crosslinked KGM/HPAM gel

Preparation, Evaluation and Field Application of Thermally Induced Crosslinked Polymer Gel Leakage Plugging Agent

Multiple Hydrogen Bonding-Assisted High-Strength Hydrogel of Silica/Polyacrylamide Nanocomposite Cross-Linked with Polyethylenimine

Development of a High-Strength and Adhesive Polyacrylamide Gel for Well Plugging

Optimization of the Methods to Develop Stable Polymer Gels for Water Management in Medium- and Ultra-High-Salinity Reservoirs

Synthesis and Evaluation of Plugging Gel Resistant to 140 °C for Lost Circulation Control: Effective Reduction in Leakage Rate in Drilling Process