Vorderes Kreuzband im Mittelpunkt des Interesses

Prof. Dr. S. Rupp,D. Kohn

DOI: https://doi.org/10.1007/s001320200000

2002-08-01

Abstract:

What problem does this paper attempt to address?

Nano-silica hybrid polyacrylamide/polyethylenimine gel for enhanced oil recovery at harsh conditions

Qiang Li,Xiaorong Yu,Lili Wang,Shanshan Qu,Wenchuan Wu,Renjing Ji,Yue Luo,Huan Yang

DOI: https://doi.org/10.1016/j.colsurfa.2021.127898

2022-01-01

Abstract:Nanomaterial composite gel has been successfully applied for enhanced oil recovery (EOR). However, the fatal flaw of using bare SiO2 nanoparticles in polymer gel systems is their agglomeration and poor dispersion stability. In this paper, hexadecyl trimethyl ammonium bromide (CTAB) modified SiO2 nanoparticles for the reinforcement of PAM/PEI polymer gels was proposed. Basic performances of surface modified SiO2 (C-SiO2) including chemical structure, thermal stability and micro morphology were characterized by thermogravimetry, scanning electron microscope (SEM) and infrared spectroscopy (IR). In addition, the gelation performance with respect to C-SiO2 dosage, pH, temperature and salinity were also examined in comparison with pure PAM/PEI gels. The results indicated that no gel was formed when pH < 7. Gel strength was improved with the increase of C-SiO2 concentration, pH (> 7) and temperature, both the gelation time and gel strength decreased with the increase of salinity. C-SiO2/PAM/PEI gel revealed long-term stability and the gel strength maintained Grade I within 360 days under the harsh reservoir conditions (salinity = 70,000 mg/L, temperature = 120 °C, pH = 9) in comparison with PAM/PEI (gel strength reduced to Grade D with syneresis). The mechanism of C-SiO2/PAM/PEI gel for reservoirs with high temperature and high salinity due to the rigid hybrid network resulting from the combination of ionic bonds and hydrogen bonds between PAM and C-SiO2.

chemistry, physical
Strengthening the Hydrogel for Lost Circulation Control through In Situ Self-Assembled Nanocomposite Networks

Dalong Sun,Yang Yang,Yiheng Liu,Zhiming Wu,Hao Zhang

DOI: https://doi.org/10.1021/acs.energyfuels.2c04071

IF: 4.6541

2023-03-01

Energy & Fuels

Abstract:Polymer hydrogels have been proven effective in lost circulation control in well drilling. However, common polymer hydrogels suffer from unfavorable strength and stability under high-temperature and high-pressure conditions, which makes the hydrogels difficult to meet the needs of well drilling in high-temperature, deep, and ultradeep reservoirs. In this study, a nanocomposite gel (ISNG) system composed of polyacrylamide (PAM), polyethyleneimine (PEI), cetyltrimethylammonium bromide (CTAB), and nanosilica (nano-SiO2) was proposed. The strength of ISNG consisting of 7.0 wt % PAM, 1.0 wt % PEI, 1.0 wt % nano-SiO2, and 0.3 wt % CTAB was approximately 10.3 times higher than that of the blank sample. The superior strength endowed ISNG with favorable pressure-bearing performance, and the breakthrough pressure of ISNG achieved 0.17 MPa under 120 °C for the core with a length of 50 mm and a fracture width of 1.0 mm, while the breakthrough pressure of the blank sample was only 0.08 MPa. The Fourier transform infrared (FTIR) spectroscopy and thermogravimetry–derivative thermogravimetry (TG–DTG) analyses confirmed that the superior strength of ISNG compared to other samples was closely related to physical interaction and its network structure. The results of dynamic light scattering (DLS), zeta potential (ζ-potential), scanning electron microscopy (SEM), and rheology tests showed that the strengthening mechanism for ISNG was mainly attributed to the in situ self-assembled nanocomposite network of PAM, nano-SiO2, and CTAB. The in situ surface modification of nano-SiO2 by CTAB changed the interaction between PAM and nano-SiO2, which resulted in variations in the hydrodynamic volume of the network. The maximum strength of ISNG was achieved at 0.3 wt % CTAB concentration due to the optimum network structure. The in situ self-assembled nanocomposite network enhanced the physical cross-linking density of ISNG without damaging the chemical cross-linking reaction between PAM and PEI.

energy & fuels,engineering, chemical
Conjoined-network induced highly tough hydrogels by using copolymer and nano-cellulose for oilfield water plugging

Jintao Li,Peng Wei,Yahong Xie,Ziteng Liu,Hongjie Chen,Long He

DOI: https://doi.org/10.1016/j.jiec.2022.01.038

IF: 6.76

2022-05-01

Journal of Industrial and Engineering Chemistry

Abstract:Hydrogels have been widely adopted for in-depth water control in mature oilfields, however, the poor mechanical properties limit their application. Herein, a conjoined-network induced hydrogel was prepared through the in-situ free radical copolymerization of acrylamide (AM), Acrylic acid (AA) and N,N′-methylenebis(acrylamide) (MBA) in the presence of nano-cellulose (CNF/ACNF), and the coordination effect between aluminium ion and carboxyl. The results showed that a small amount of nano-cellulose (0.2 %) increased the compressive strength of the hydrogel by 7 times. The presence of nano-cellulose endowed the hydrogel with excellent thermal stability and high shearing elasticity, at the same time, could effectively reduced the swelling rate that hindered its disintegration in practical application. The evaluation of sand-pack plugging suggested that the double cross-linked nano-cellulose hydrogel presented a significant capacity for efficient water plugging, where the breakthrough pressure gradient was as high as 23.73 MPa, the plugging rate reached 99.9%, and the maximum residual resistance factor was 3902.06. This work provided a novel design of hydrogel with high compressive strength and satisfactory stability for water shutoff and conformance control in heterogeneous oil reservoirs.

engineering, chemical,chemistry, multidisciplinary
Double networks hybrid hydrogels of silica nanoparticles/polyacrylamide: Network stiffness, viscoelastic, mechanical and adhesion properties

Camellia Zareie,Azadeh Seifi,Ahmad Reza Bahramian

DOI: https://doi.org/10.1080/01932691.2024.2342434

2024-04-19

Journal of Dispersion Science and Technology

Abstract:Today, the challenge of enhancing the strength and adhesion of the polyacrylamide hydrogel network is still a major concern in many applications. This study investigates the effect of silica nanoparticle concentration on the cross-linked polyacrylamide hydrogel's gelation, viscoelastic, structural, and adhesion properties. The hybrid hydrogels were evaluated using DSC, XRD, SEM, and rheological analysis to determine their enthalpy of cross-linking, crystallinity, morphology, and elastic properties. The results of kinetic analysis confirmed the catalytic effect of silica nanoparticles on the gelation kinetics. A deviation from the elastic behavior of the unfilled hydrogel was found from the rheological studies. Using the Weibull Model to describe the creep test results showed a significant increase in retardation time with increasing silica nanoparticles content up to the percolation threshold of 0.24 wt.%. This confirmed the development of a more viscous behavior due to the formation of a physical network of nano-silica particles. Based on the DSC energy of hydrogels, both chemical and physical tie points (approximately 19 covalent crosslinking points) were calculated. The hydrogel containing 9 wt.% of silica nanoparticles demonstrated significant improvement in density, and adhesion to the metal surface by about 100% and 350%, respectively. As a result of this study, the hydrogel containing 9 wt% of silica nanoparticles (H 9 ) is suggested for various field studies, such as oil well plugging industries.

chemistry, physical
Preparation Method and Performance Evaluation of a Gel Based on AM/AMPS Copolymer

Yunling Ran,Guicai Zhang,Ping Jiang,Haihua Pei

DOI: https://doi.org/10.3390/gels8120802

IF: 4.6

2022-12-08

Gels

Abstract:Polymer gels have been widely used in high water cut oilfields for profile control and water plugging. It is urgent to develop a gel suitable for the Tahe Oilfield (Temperature: 130 °C, salinity: 2.2 × 105 mg/L) in China. A stable gel was prepared by using an acrylamide (AM)/2-acrylamide-2-methyl propanesulfonic acid (AMPS) copolymer crosslinked with urotropin (HMTA), hydroquinone (HQ), thiourea and Nano-SiO2. This paper covers a step-by-step process for designing gels based on experience with preparing gels. A wide range of combinations between polymers and crosslinking agents with and without stabilizers were investigated, and the results indicated that there is an optimal value of AMPS content of AM/AMPS copolymers in the preparation of gels. Increasing the mass fraction of copolymer and using stabilizer enhanced the performance of gel, but an excessive amount of crosslinking agent was not conducive to the stability of gel. The work optimized the formula of plugging agent suitable for the high temperature and high salt (HTHS) condition in the Tahe Oilfield. The gelling solution had a long gelation time of 20 h. The gel had high strength (Sydansk's gel-strength code of "G") with storage modulus of 12.9 Pa and could be stable for half a year at 130 °C and 2.2 × 105 mg/L of salinity. The plate model that could be heated and pressurized was used to simulate the oil flooding and profile modification under the condition of the Tahe Oilfield for the first time. The experiment results showed that the oil recovery could be increased by 13.22% by subsequent water flooding under heterogeneous formation condition. Therefore, it was fully confirmed that the plugging performance of AM/AMPS phenolic gel prepared in the work was excellent. The information provided in the study could be used as a reference for the design and evaluation of polymer gels in other HTHS reservoirs.

polymer science
Development of dual-crosslinked nanocomposite gel for water management in high-temperature reservoirs

Zhi-Jie Li,Hu Jia,Zheng Kang,Jun-Yi Wu,Ibnelwaleed A. Hussein,Zhong-Guo Li,Zhi-Jie LiHu JiaZheng KangJun-Yi WuIbnelwaleed A. HusseinZhong-Guo Lia Tarim Oilfield Company,CNPC,Kuerle,Chinab National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu,Chinac Petroleum Engineering Technology Institute of Southwest Petroleum Branch,SINOPEC,Chengdu,Chinad Gas Processing Center,College of Engineering,Qatar University,Doha,Qatare Chemical Engineering Department,Qatar University,Doha,Qatar

DOI: https://doi.org/10.1080/01932691.2024.2338363

2024-04-19

Journal of Dispersion Science and Technology

Abstract:Due to their controllable gelation time and high gel strength, polymer gels are widely used in the oil and natural gas industry for sealing operations. Aiming at the problems of fast gelation time and poor stability of polymer gel when the temperature exceeds 120 °C, a dual-crosslinked nanocomposite gel for high-temperature reservoir water management was developed. Polymers, crosslinking agents, nanomaterials, and retarders were studied for the effects of the concentration of each component on the initial viscosity, gelation time, stability, and viscoelastic properties of the gel. The long-term stability and water-plugging adaptability were evaluated. FTIR and viscoelastic performance analyses clarified the mechanism of action. The gel strength and thermal stability enhancement mechanism was analyzed based on SEM. At 170 °C,the gelation time is 5 ∼ 10h after adding retarder and aging in formation water for 30 days resulted in dehydration rates within 10%. The injection volume of the plugging agent is 0.3 PV, and the plugging rate of sand-filled pipes with different permeability is above 97%. The elastic modulus of the terpolymer SAV333/phenol-formaldehyde system was increased by 10 times by resorcinol and SiO 2 . The enhancement mechanism is mainly due to the gel's strong dendritic dual-crosslinked network structure and the dual role of hydrogen bonding and electrostatic attraction of SiO 2 . Dual-crosslinked nanocomposite gel (DCNG) has shown promising performance as sealing material in high-temperature and ultra-high-temperature reservoirs.

chemistry, physical
Development of a High-Strength and Adhesive Polyacrylamide Gel for Well Plugging

Li Cheng,Yi Qin,Yubin Su,Yuan Pan,Ying Wang,Ruiquan Liao,Zhen Li

DOI: https://doi.org/10.1021/acsomega.1c06626

IF: 4.1

2022-02-11

ACS Omega

Abstract:Addition of melamine formaldehyde (MF) as a crosslinker containing hydroxymethyl to partially hydrolyzed poly(acrylamide) (HPAM) generated covalently crosslinked in situ gels through chemically nucleophilic attack by hydroxymethyl groups to amide in an HPAM backbone, which was demonstrated by FTIR spectrum analysis and rheological studies. NH4Cl could act as a catalyst to reduce the gelation time from 7 days in dilute water to 8 h in the presence of 0.8 wt % NH4Cl. Compared to high-temperature HPAM/phenol/formaldehyde and HPAM/Cr3+ gel systems, this gel has better adhesion and higher strength over a broad range of temperature from 60 to 100 °C under reservoir conditions with a denser and hook-like three-dimensional microstructure. Pressure-bearing capacity experiments demonstrated that the gel could efficiently plug high pressure from underneath to seal the wellbore, attributing to its high strength and good adhesion. This study could aid petroleum engineers in applying soft materials on controlling the pressure via polymer gels.

chemistry, multidisciplinary
Long-Term Investigation of Nano-Silica Gel for Water Shut-Off in Fractured Reservoirs

Ahmed Ali,Mustafa Al Ramadan,Murtada Saleh Aljawad

DOI: https://doi.org/10.3390/gels10100651

IF: 4.6

2024-10-12

Gels

Abstract:Silicate gels have long been utilized as water shut-off agents in petroleum fields to address excessive water production. In recent years, nano-silica gel has emerged as a promising alternative to traditional silicate gels, offering potentially improved plugging performance. However, the long-term effectiveness of these gels remains uncertain, posing challenges to sustained profitability. Therefore, a comprehensive study spanning 6 months was conducted on fractured and induced channel samples treated with nano-silica gel of 75/25 wt% (silica/activator) at 200 °F. A comparative analysis was performed with samples treated using polyacrylamide/polyethyleneimine PAM/PEI gel (9/1 wt%) to compare the performance of both systems. Throughout the aging period in formation water at 167 °F, endurance tests were conducted at regular intervals, complemented by computed tomography (CT) scans to monitor any potential degradation. The results revealed nano-silica gel's superior long-term performance in plugging fractures and channels compared to PAM/PEI gel. Even after 6 months, the nano-silica gel maintained a remarkable 100% plugging efficiency at 1000 psi, with a maximum leak-off rate of 0.088 cc/min in the mid-fractured sample and 0.027 in the induced channel sample. In comparison, PAM/PEI gel exhibited a reduction in efficiency to 99.15% in the fractured sample (5.5 cc/min maximum leak-off rate) and 99.99% in the induced channel sample (0.036 cc/min maximum leak-off rate). These findings highlight the potential of nano-silica gel as a more durable water shut-off agent for managing water production in fractures and channels.

polymer science
Synergism of polyvinyl alcohol fiber to hydrogel for profile modification

Lifeng Chen,Zhen Qian,Liang Li,Meilong Fu,Hui Zhao,Lipei Fu,Gang Li

DOI: https://doi.org/10.1016/j.colsurfa.2019.123609

2019-10-01

Abstract:Water production is getting worse along with the continuous water injection in the reservoir with fracture, but common hydrogels cannot be successfully applied for water shutoff due to its poor resident ability in fracture. In this work, an interpenetrating network hydrogel has been developed innovatively by polyvinyl alcohol (PVA) fiber and common polyacrylamide (PAM) hydrogel. Plugging ability, long-term thermal stability and the interaction between PVA fiber and hydrogel were detailedly studied. Results show that PVA fiber is beneficial to the stability of the PAM hydrogel, and the syneresis rate can be decreased from 30% to 3% on the 120th day. PVA fiber accelerates the hydrogel gelation, and the high concentration of fiber leads to good hydrogel strength. PVA fiber increases the amount of the bound water in hydrogel, leading the hydrophilcity increase of hydrogel. An interpenetrating network is formed on the micrometer level, resulting from the three-group crosslinking among polymer, cross-linker and fiber. Compared with common PAM hydrogel, the interpenetrating network hydrogel has better water shutoff effect and EOR performance. Core flow experiment and micromodel test show that the interpenetrating network hydrogel forms an effective bridge in fracture, and it is hard to be moved due to the water washing. The introduction of fiber to hydrogel is an innovative research, which not only improves the water shutoff effect of hydrogel in fracture, but also provides reference to increase the performance of drilling fluid, fracturing solution and EOR polymer utilized in petroleum engineering.
Experimental Investigation of a Novel Nanocomposite Particle Gel for Water Shutoff Treatment in Mature Oilfields

Li Cheng,Yi Qin,Kejing Gao,Liyang Zhang,Jingsheng Zhou,Dingxue Zhang,Ruiquan Liao,Zhen Li

DOI: https://doi.org/10.1021/acsomega.1c07242

IF: 4.1

2022-03-04

ACS Omega

Abstract:Conventional preformed particle gels suffer from insufficient salt tolerance and weak mechanical properties after water absorption, which reduce the water shutoff effect in mature oilfields. In this paper, a nanocomposite particle gel (NCPG) is synthesized by copolymerization of acrylamide (AM) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) using laponite RD (LPT) as a physical cross-linker and N,N-methylene-bisacrylamide (MBA) as a chemical cross-linker via in situ free radical polymerization. Compared with the NCPG without LPT, both the swelling rate and mechanical properties of NCPG added with LPT are found to be improved. In addition, the pore sizes of the network of the swollen NCPG are smaller than those of the sample without LPT, and the thermal stability is also slightly enhanced. The swelling rate of NCPG increases with increasing AMPS concentration. The water absorbency of NCPG first increases and then decreases with increasing MBA and APS concentrations. The NCPG is sensitive to alkaline medium due to the presence of sulfonic acid groups on the molecular chains of the NCPG. The synthesized NCPG exhibits good salt tolerance at 80 °C in formation water. The plugging rate of the NCPG to a sand-pack is above 90%, and the residual resistance factor reaches 19.2 under reservoir conditions. These results indicate that the NCPG may have potential application for water shutoff treatment in mature oilfields.

chemistry, multidisciplinary
Preparation and temperature resistance mechanism of nanoparticle-enhanced polymer gel

Mingjia Liu,Jijiang Ge,Guicai Zhang,Meijie Wang,Dengya Chen,Ping Jiang,Haihua Pei,Weixiong Chen,Jiasu Li

DOI: https://doi.org/10.1007/s00396-024-05253-y

IF: 2.4

2024-04-15

Colloid & Polymer Science

Abstract:In order to solve the problem of poor stability of HPAM (partially hydrolyzed polyacrylamide) gel as a plugging agent at 150 °C, this paper investigates the preparation of a polymer gel strengthened with nano-SiO 2 , exhibiting good thermal stability, using a low-cost, low-hydrolysis anionic polymer. The experimental results indicated that when the gel was prepared with 1 wt% HPAM, 1 wt% water-soluble phenolic resin (WSPR) as a crosslinker, and 1 wt% nano-SiO 2 as a stabilizer, the dehydration rate of the gel was less than 5 wt% after 180 days of aging at 150 °C. In order to identify the stability mechanism of nano-SiO 2 -strengthened polymer gel, we conducted rheological tests, Cryo-SEM analysis, Fourier transform infrared (FTIR) spectroscopy, and solid-state nuclear magnetic resonance (NMR) analysis on the polymer gel before and after adding nanoparticles. The methods described in the study demonstrate the excellent long-term thermal stability of the polymer gel strengthened with nano-SiO 2 from both chemical bonding and microscopic perspectives. The results of rheological experiments indicated that the addition of nanoparticles improved the yield stress and long-term thermal stability of the gel. The scanning electron microscope (SEM) microstructure analysis confirmed that the addition of nanoparticles resulted in high-density cavities between the microscopic network structures of the gel. This facilitated the trapping of a significant amount of free water and the formation of a stable spatial mechanical support structure, ultimately enhancing the macro-mechanical strength of the gel. Additionally, FTIR and NMR experiments demonstrated that the nanoparticles effectively inhibited the hydrolysis of amide groups to carboxylate, thereby significantly preventing the high-temperature degradation of the gel and maintaining its strength after prolonged aging.

polymer science,chemistry, physical
Improved understanding nanocomposite gel working mechanisms: From laboratory investigation to wellbore plugging application

Hu Jia,Cheng-Cheng Niu,Xin-Yu Yang

DOI: https://doi.org/10.1016/j.petrol.2020.107214

IF: 5.168

2020-08-01

Journal of Petroleum Science and Engineering

Abstract:Fluid loss is serious in low-pressure fractured reservoir. In this paper, the technique of wellbore isolation for temporary plugging is proposed to reduce the loss of workover fluid. Based on radical polymerization, the high-strength nanocomposite gel plugging agent was prepared by introducing nano-silica. Firstly, the strength properties of gel plug were studied through stress and strain evaluation, viscosity modulus test and wellbore sealing pressure evaluation, respectively. The working mechanism was revealed by infrared spectroscopy (FTIR), environmental scanning electron microscopy (ESEM) and differential scanning calorimetry (DSC) analysis. The study shows that under 50% compression strain, the compression capacity of the nanocomposite gel with 5% nano-silica is nearly three times higher than that of without adding nano-silica, and the thermal stability is improved by 38%, which has the potential to buffer the pressure of the liquid column in the bottom hole and perform good thermostability. Secondly, the actual wellbore simulation system confirmed its ability to seal the perforation zone. Result shows that the pressure-bearing gradient is 20 MPa/100m in the oil tube, and gel plug length can be designed according to the positive pressure demand. The addition of nano-silica makes the network of nanocomposite gel becoming denser, in favor to store more energy. The hydrogen bond generated in the nanocomposite gel increases its mechanical strength. Finally, the successful application of the nanocomposite gel for wellbore temporary plugging in a low-pressure carbonate gas well was summarized. This study provides an avenue to develop various nanocomposite gels for downhole jobs.

energy & fuels,engineering, petroleum
Rheological properties and swelling behavior of nanocomposite preformed particle gels based on starch-graft-polyacrylamide loaded with nanosilica

Shima Baloochestanzadeh,Shadi Hassanajili,Mehdi Escrochi

DOI: https://doi.org/10.1007/s00397-021-01287-z

2021-07-22

Rheologica Acta

Abstract:Gel treatment using preformed particle gels is a technique applied in mature reservoirs to control excess water production. In this study, a novel nanocomposite gel was proposed and optimized for better performance in high-salinity and high-temperature conditions of oilfields. Gels were prepared by grafting copolymerization of crosslinked polyacrylamide onto starch (starch-g-CPAM) and loaded with silica nanoparticles. Different tests were performed on nanocomposite prepared particle gels (NCPPGs) to investigate the effect of silica content (2–10 wt%), temperature, and brine concentration on network structure, swelling, and mechanical behavior of the gels. The NCPPG with 5 wt% showed a superior swelling ratio. Rheological studies depicted that nanosilica could increase the mechanical strength of the NCPPGS in high temperature and high salinity brines (90 °C and 225,000 ppm) up to 900 Pa. Finally, loading nanosilica up to 5 wt. % into the NCPPG resulted in capable mechanical stability and water uptake under harsh conditions.

mechanics
Improved oil recovery by 3D hydrogel composite reinforced with natural bentonite nanoparticles

Farzin Saghandali,Mahsa Baghban Salehi,Vahid Taghikhani,Taghikhani, Vahid

DOI: https://doi.org/10.1007/s13726-023-01212-6

2023-08-09

Iranian Polymer Journal (English Edition)

Abstract:Over the past years, oil and gas research works have been concentrated in the enhanced oil recovery methods through injection of chemical materials. In this work, Co[AM-AMPS-MA]/PEI-MBA(Ben) nanocomposite hydrogel was designed and synthesized. To characterize the synthesized nanocomposite hydrogel, TGA, DTG, XRD, FTIR, SEM, and ESEM techniques, and equilibrium swelling, frequency and temperature sweep, and micromodel tests were applied. Based on TGA and DTG data, thermal stability of the sample was confirmed at the reservoir temperature. The XRD analysis confirmed the amorphous structure of the nanocomposite hydrogel and the homogeneous distribution of the nanoparticles in its structure. SEM and ESEM micrographs proved homogeneous and porous structure of the nanocomposite and its hydrogel, respectively. Based on the frequency and temperature sweep test, the linear viscoelastic behavior of the nanocomposite was determined in the frequency range of 0.1–10 Hz and under the range from ambient temperatures up to 140 oC. The shape recovery property was confirmed by the loop test. The equilibrium swelling test indicated an increase in swelling with increasing temperature and a decrease with increasing salinity. The sensitivity factors to salinity at 25 °C and 90 °C were observed as 0.62 and 0.86, respectively. Finally, the nanocomposite hydrogel flooding test results in the micromodel confirmed the synthesized nanocomposite's ability to increase oil recovery by 57%. Note that based on the results of this test, the oil recovery factor by injecting distilled water was calculated to be 36%. According to the obtained results, the synthesized nanocomposite has the potential to be used as an injectable chemical to increase oil recovery.
Development and Performance Evaluation of a New Conformance Control Agent Gel

Bin Ma,He Wang,Shu Jiang,Mengyu Chen,Lei Zhang

DOI: https://doi.org/10.3390/gels10100618

IF: 4.6

2024-09-26

Gels

Abstract:How to effectively plug the multi-scale fractured water channeling has always been the key to achieving efficient water flooding of fractured low-permeability oil reservoirs. In this paper, a new type of supramolecular–polymer composite gel is developed, which is suitable for plugging multi-scale fractured water channeling. The supramolecular–polymer composite gel is composed of a polymer (such as polyacrylamide), cross-linking agent (such as polyethyleneimine), supramolecular gel factor (such as cyclodextrin) and polarity regulator (such as ethyl alcohol). The mass fraction of polyacrylamide, polyethyleneimine, cyclodextrin and ethyl alcohol are 0.15%, 0.2%, 1% and 0.2%, respectively. At the initial state, the viscosity of the composite gelant system is less than 20 mPa·s. It has good injection performance in micro-scale fractures and can enter the deep part of a fractured reservoir. At 40 °C, the composite gelant system can form a gel with a double network structure after gelation. One of the networks is formed by the covalent interaction between polyacrylamide and polyethyleneimine, the other network is formed by the self-assembly of cyclodextrins under the action of the ethyl alcohol. The comprehensive performance of the composite gel is greatly improved. The strength of the composite gel is >5 × 104 mPa·s, and it has good plugging strength in large-scale fractures. The composite gel can be used as a conformance control agent for fractured low-permeability oilfields.

polymer science
Strengthening Network of Polyacrylic Acid/Silica Nanocomposite Hydrogels

Zilu Liu,Juan Du,Yun Tan,Liqin Cao,Shimei Xu,Jianbin Huang

DOI: https://doi.org/10.1002/pc.24440

IF: 5.2

2018-01-01

Polymer Composites

Abstract:The polyacrylic acid (PAA)/silica nanocomposite hydrogels with high mechanical property were prepared by combining sol-gel process and in situ free radical polymerization using 3-methacryloxypropyltrimethoxysilane (MPTMS) as silane and acrylic acid (AA) as monomers. The structure-property relationship of nanocomposite hydrogels was characterized by FT-IR, DMA, TGA, XRD, TEM, and static mechanical testing. The dependence of mechanical property on the network parameter was investigated. The elastic modulus and compression fracture stress of PAA/silica nanocomposite hydrogels reached 1.27 and 1.35 MPa at molar ratio of MPTMS to AA of 0.034. The enhancement of mechanical property was attributed to the multiple cross-linking networks between MPTMS and AA by covalent bonding and hydrogen bonding. POLYM. COMPOS., 39:3969-3976, 2018. (c) 2017 Society of Plastics Engineers
Preparation, Evaluation and Field Application of Thermally Induced Crosslinked Polymer Gel Leakage Plugging Agent

Jindong Chen,Hengbin Qiu,Lesly Dasilva Wandji Djouonkep,Junxian Lv,Binqiang Xie

DOI: https://doi.org/10.1007/s10924-024-03334-1

IF: 4.705

2024-06-23

Journal of Polymers and the Environment

Abstract:Addressing the complex issue of lost circulation in drilling operations is crucial as it increases nonproductive time and costs. Conventional gel plugging materials often exhibit low temperature resistance, poor pumpability, and low pressure-bearing capacity. To overcome the limitations, a self-made polymer (HSA) was initially synthesized and mixed with two crosslinker agents (MBA/PEI) at room temperature to induce a new type of high-temperature-resistant and pressure-resistant polymer gel agent (HSA-G). Investigating the gel strength and plugging capacity, the vertical inverted tube observation, 71-type high-temperature and high-pressure (HTHP) instruments, and high-pressure filter with varying fracture cracks (3–5 mm) were employed. HSA-G demonstrated excellent gelation strength for 4–5 h at 140 °C, while retaining more than 57% of its gel strength after aging at 140 °C for 144 h, which is 3 times higher than the commercially available hydrolyzed polyacrylamide (HPAM + PEI). The excellent performance was attributed to the synergy between PEI-MBA, which induces tight-crosslinked interconnected structure within HSA-G, mitigating fluid losses to only 72 mL compared to 194 mL for HPAM-G, under 8.5 MPa in the HTHP sand bed at 140 °C. In the fracture leakage simulations using a 5 mm crack performed at 6 MPa at room temperature, the filtration loss of HSA-G is 300 mL, almost half that of HPAM-G, showcasing its superior plugging and high-pressure bearing performance. In conclusion, HSA-G has not only demonstrated operational effectiveness in reducing downtime costs and fluid losses but can also temporally replace cement plugging to prevent reservoir contamination in alignment with environmentally friendly practices.

engineering, environmental,polymer science
Preparation and Performance Evaluation of Temperature-Resistant and Salt-Resistant Gels

Xudong Li,Meilong Fu,Jiani Hu

DOI: https://doi.org/10.3390/gels10050337

IF: 4.6

2024-05-17

Gels

Abstract:In order to improve the plugging performance of high-temperature and high-salt oil reservoir plugging agents, this paper utilizes a copolymer composed of acrylamide and 2-acrylamide-2-methylpropanesulfonic acid (AM/AMPS) as the polymer, polyethyleneimine as the cross-linking agent, and nylon fiber as the stabilizer to develop a high-temperature- and high-salt-resistant gel system. This study analyzed and evaluated the temperature resistance, salt resistance and blocking performance of the gel system. The evaluation results show that the gel-forming strength of this gel system can reach an H level, and it has good thermal stability at the high temperature of 130 °C. At the high salinity of 240,720 mg/L, the syneresis rate remains below 2.5%, and the gel-forming time is greater than 15 h; the higher the temperature, the shorter the gelling time. The results of our sand-filled pipe-plugging experiment show that the gel system can adapt to sand-filled pipes with different levels of permeability, and reaching a plugging rate of 94%.

polymer science
Reinforcement of Nanocomposite Hydrogel with Dialdehyde Cellulose Nanofibrils via Physical and Double Network Crosslinking Synergies

Liang Li,Jixiang Guo,Chuanhong Kang,Hanxuan Song

DOI: https://doi.org/10.3390/polym15071765

IF: 5

2023-04-02

Polymers

Abstract:Preparation of tough and high-strength hydrogels for water plugging in oil fields with an easy-scalable method is still considered to be a challenge. In this study, dialdehyde cellulose nanofibril (DA-CNF) prepared by sodium periodate oxidation, polyamine, 2-acrylamido-2-methylpropane sulfonic acid (AMPS) with sulfonate groups and Acrylamide (AM) as raw materials, CNF reinforced nanocomposite hydrogels were prepared in one step by in-situ polymerization. The tensile strength, and texture stability of the obtained nanocomposite hydrogel were determined. The results showed that the tensile strength and toughness of the obtained nanocomposite hydrogel increased four times compared with control sample due to physical and chemical double crosslinking synergies. Moreover, the texture intensity of DA-CNFs reinforced hydrogel still maintains high stability and strength performance under high salinity conditions. Therefore, DA-CNF reinforced hydrogel has potential application value in both normal and high-salinity environments in oil recovery.

polymer science
Mechanically robust and thermally enhanced sand‐polyacrylamide‐2D nanofiller composite hydrogels for water shutoff applications

Mohan Raj Krishnan,Ayman Almohsin,Edreese H. Alsharaeh

DOI: https://doi.org/10.1002/app.54953

IF: 3

2023-12-01

Journal of Applied Polymer Science

Abstract:In this study, we report a facile preparation method for mechanically robust and thermally enhanced sand‐polyacrylamide (PAM)‐2D‐nanofillers composite hydrogels and their application in water shutoff. Herein, we report a facile preparation method for mechanically robust and thermally enhanced sand‐polyacrylamide (PAM)‐2D‐nanofillers composite hydrogels and their application in water shutoff. To prepare the sample, 4 wt% of aqueous PAM solution is mixed with organic cross‐linkers of hydroquinone (HQ) and hexamethylenetetramine (HMT) in a 1:1 weight ratio and aqueous potassium chloride (KCl) solution and with a specific amount of 2D‐nanofillers such as commercial graphene (CG) nanosheets or boron nitride nanoparticles (BN NPs). A specific amount of the above solution is added to sand, well mixed, and subsequently cured at 150°C for 8 h. The prepared composite hydrogels were characterized by Fourier‐transform infrared spectroscopy (FT‐IR) for chemical composition and X‐ray diffraction (XRD) for successful hydrogel coating onto the sand particles. Thermal stabilities of the samples have been evaluated by differential scanning calorimetry (DSC). Mechanical properties (storage modulus [G′]; loss modulus [G′′]; gel strength (G′/G′′); and damping factor [G′′/G′]) of the samples were determined using dynamic mechanical analyses. The thermal stability of the samples has reached as high as 193.4°C, while the gel strength is found to be a maximum of 16.2. The water swelling ratio for the composite hydrogel has reached a maximum of 1100% within 1 h.

polymer science

Vorderes Kreuzband im Mittelpunkt des Interesses

Nano-silica hybrid polyacrylamide/polyethylenimine gel for enhanced oil recovery at harsh conditions

Strengthening the Hydrogel for Lost Circulation Control through In Situ Self-Assembled Nanocomposite Networks

Conjoined-network induced highly tough hydrogels by using copolymer and nano-cellulose for oilfield water plugging

Double networks hybrid hydrogels of silica nanoparticles/polyacrylamide: Network stiffness, viscoelastic, mechanical and adhesion properties

Preparation Method and Performance Evaluation of a Gel Based on AM/AMPS Copolymer

Development of dual-crosslinked nanocomposite gel for water management in high-temperature reservoirs

Development of a High-Strength and Adhesive Polyacrylamide Gel for Well Plugging

Long-Term Investigation of Nano-Silica Gel for Water Shut-Off in Fractured Reservoirs

Synergism of polyvinyl alcohol fiber to hydrogel for profile modification

Experimental Investigation of a Novel Nanocomposite Particle Gel for Water Shutoff Treatment in Mature Oilfields

Preparation and temperature resistance mechanism of nanoparticle-enhanced polymer gel

Improved understanding nanocomposite gel working mechanisms: From laboratory investigation to wellbore plugging application

Rheological properties and swelling behavior of nanocomposite preformed particle gels based on starch-graft-polyacrylamide loaded with nanosilica

Improved oil recovery by 3D hydrogel composite reinforced with natural bentonite nanoparticles

Development and Performance Evaluation of a New Conformance Control Agent Gel

Strengthening Network of Polyacrylic Acid/Silica Nanocomposite Hydrogels

Preparation, Evaluation and Field Application of Thermally Induced Crosslinked Polymer Gel Leakage Plugging Agent

Preparation and Performance Evaluation of Temperature-Resistant and Salt-Resistant Gels

Reinforcement of Nanocomposite Hydrogel with Dialdehyde Cellulose Nanofibrils via Physical and Double Network Crosslinking Synergies

Mechanically robust and thermally enhanced sand‐polyacrylamide‐2D nanofiller composite hydrogels for water shutoff applications